Gary Mintchell

JUNE 25, 2024

This news holds relevance for those hoping for “open” process control technology. The co-owners of Process Automation Device Information Model (PA-DIM), including FieldComm Group , ISA 100 WCI, NAMUR, ODVA , OPC Foundation , PROFIBUS and PROFINET International , VDMA, and ZVEI, today announced the release of the PA-DIM Version 1.1

Automation 130

Automation Process control Function Manufacturing 130

Control Engineering

NOVEMBER 10, 2022

Process control insights. Distributed control systems (DCSs) are at the heart of process manufacturing operations and have evolved to focus on digitalization. This flexibility and openness to change will allow them to add new functions easily. Adapting for the future.

Process control 52

Process control Function Automation Process manufacturing 52

i4.0 today

APRIL 28, 2025

Integration into heterogeneous device and fieldbus landscapes is also easy thanks to SICK’s Function Block Factory. When used with a SIG100, the IP67-certified SIG300 has a total of eight ports and can process up to 102 digital signals. This can lead to significant cost savings for cloud services.,

Automation 52

Automation Function Process control Robotics 52

Quantis

JUNE 5, 2024

IT OT Beverage Manufacturing In social media, one reads criticism about the 5-layer architecture model according to ISA S95 again and again. Layer-by-Layer: Building a Reliable IT/OT Architecture A modern IT / OT architecture in a manufacturing company consists of several layers that fulfill specific functions and are interconnected.

Beverage 130

Beverage Manufacturing Industry 4.0 Industry 4.0 130

iBASEt

AUGUST 4, 2022

While all manufacturers are straining in the current environment due to COVID pandemic-driven supply chain and labor scarcity issues and the growing impact of inflation on the economy, small and mid-sized business (SMB) manufacturers are being hit particularly hard. The primary beneficiary then was the ERP system.

Manufacturing Execution System (MES) 98

Manufacturing Execution System (MES) Manufacturing Supply Chain Function 98

Control Engineering

NOVEMBER 7, 2022

This doesn’t always allow for regular interaction with a broad spectrum of manufacturing peers, which can leave individuals and organizations feeling they are so unique that they are relatively isolated. The process functional ecosystem addresses the equipment, processing steps, and layered data flow aspects of manufacturing.

Function 52

Function Automation Manufacturing Process control 52

Control Engineering

NOVEMBER 6, 2022

Process manufacturing, DCS, cloud insights. The cost and complexity of accessing the critical data connected to the distributed control system (DCS) is a challenge for process manufacturers. Visibility of control and optimization data in real-time.

Process manufacturing 98

Process manufacturing Manufacturing Supply Chain Function 98

Gary Mintchell

APRIL 2, 2024

Fero Labs has developed software to help certain types of process manufacturing plants improve quality output economically when given a random mix of feedstock. I wrote about the company last August— A Better Way to Control Process Quality. But, would anyone trust yet another advanced process control system?

Composites 147

Composites Process control Function Process manufacturing 147

MEM

JULY 6, 2023

Norgren has launched its new enhanced global website, offering customers improved functionality that includes the ability to select, order and track products on a ‘self-serve’ basis. Thanks to improved website functionality, choosing and obtaining essential Norgren solutions will be smoother, quicker, and more intuitive than ever.

Function 52

Function Process control Automation Manufacturing 52

Manufacturer's Monthly

APRIL 3, 2025

Image: Gorodenkoff/stock.adobe.com Minitab brings more than 50 years worth of expertise in helping manufacturers boost production yields and reduce errors with its software solutions. Data access, automation, statistical process control and real-time monitoring. Predictive analytics and machine learning. Problem solving methods.

3D printing 59

3D printing Pharmaceutical Beverage Process control 59

Manufacturer's Monthly

NOVEMBER 5, 2023

Accuracy The multi-function display module provides visual feedback using red, yellow, and green lights to indicate whether the bolt has reached the specified torque limit or angle, or if the correct quantity has been achieved.

Manufacturing 93

Manufacturing Function Compliance Process control 93

Fabricating & Metal Work

MAY 5, 2025

This summer, Emerson will launch the first model in its next-generation Branson Polaris Ultrasonic Welding Platform, an innovative, entry-level system that provides the flexibility and control capability to meet diverse manufacturing needs.

Compliance 52

Compliance Process control Electronics Automotive 52

i4.0 today

MAY 4, 2023

HMS Networks now releases a new version of the Ixxat SafeT100 module allowing users to implement safe I/Os for FSoE – Functional Safety over EtherCAT. Previously available for PROFIsafe and CIP Safety, the new version supports Functional Safety over EtherCAT according to ETG 5100 V1.2.0. has been confirmed in the ETG test lab.

Function 52

Function Process control Form Automation 52

AU Manufacturing

MARCH 5, 2023

Article by Steve Long, General Manager Asia Pacific and Japan, Intel Over the past few decades, the world has witnessed the rise of Asia Pacific through its manufacturing capability, fueled by labor, economic and regulatory advantages. However, the world’s manufacturing powerhouse is now at a critical inflection point.

Smart manufacturing 89

Smart manufacturing Enterprise Resource Planning (ERP) Manufacturing Artificial Intelligence 89

Automation Mag

FEBRUARY 13, 2024

Global technology intelligence firm ABI Research reports that artificial intelligence (AI) will transform quality management systems (QMS) software by allowing manufacturers to close the loop on quality management more effectively, driving quality initiatives across the production lifecycle from design to control.

Quality Management System 69

Quality Management System Artificial Intelligence Manufacturing Compliance 69

MEM

JULY 4, 2023

Norgren has launched its enhanced global website, offering customers improved functionality that includes the ability to select, order and track products on a ‘self-serve’ basis. Thanks to improved website functionality, choosing and obtaining essential Norgren solutions will be smoother, quicker, and more intuitive than ever.

Function 52

Function Process control Automation Manufacturing 52

Modern Machine Shop

MARCH 11, 2025

Nadimpalli is a senior researcher with the Additive Manufacturing (AM) Lab of the Technical University of Denmark (DTU), where the open source metal AM system was developed. It is likely the most widely used additive manufacturing process for metal part production. The Additive Manufacturing Lab at DTU has 25 Ph.D.-level

3D printing 59

3D printing Sourcing Additive manufacturing Process control 59

Gary Mintchell

FEBRUARY 16, 2023

ABB Ability Symphony Plus distributed control system (DCS) contains a simplified and secure OPC UA1 connection to the Edge and Cloud, without interfering with core control and automation functionalities. It also enables users to access process and alarm data from mobile devices through the ABB Mobile Operations application.

Function 147

Function Automation Manufacturing Process control 147

Gary Mintchell

APRIL 10, 2024

In addition, when connected to a plant’s control and safety systems, it enables the utilization of manufacturing site data that has been acquired by robots, and the issuing of procedural instructions to robots, thus enabling the first step to be taken toward autonomous plant operations.

Automation 147

Automation Robotics Robotics Function 147

DO Supply

JANUARY 10, 2025

WSNs are designed to continue functioning even if some nodes fail. The central node then aggregates and transmits the data to the SCADA master station via standard communication links such as Ethernet/IP, Wireless Protocols, Cellular Networks, Modbus TCP/IP, or OCP (OLE for process control). This betters systems responsiveness.

Automation 52

Automation Function Form Robotics 52

Control Engineering

SEPTEMBER 8, 2022

Figure 4: The “bathtub curve” hazard function (blue, upper solid line) is a combination of a decreasing hazard of early failure (red dotted line) and an increasing hazard of wear-out failure (yellow dotted line), plus some constant hazard of random failure (green, lower solid line). Courtesy: Yokogawa. Courtesy: Yokogawa.

Process control 105

Process control Function Compliance Automation 105

Gary Mintchell

JULY 11, 2022

Terwiesch spoke with me several times back when he was CTO of ABB process automation. He has always had marvelous insight into technology trends and process applications. Terwiesch states the current state of process control spot on. I’ve watched the momentum of the Open Group building over the past few years.

Automation 100

Automation Process control Artificial Intelligence Function 100

ATS

FEBRUARY 9, 2024

Share Complex products require complex manufacturing processes, and that’s the essence of high-tech manufacturing. A high-tech factory challenges the maintenance function. Machinery and controls are highly sophisticated and often tightly integrated. It’s an environment that demands precision, speed and efficiency.

Manufacturing 59

Manufacturing Industry 4.0 Industry 4.0 Supply Chain 59

Manufacturer's Monthly

JUNE 23, 2024

Image: IFM Explore how ifm efector’s IO-Link enables quality control in manufacturing by blending digital automation capabilities with new and existing systems. ifm tailors its solutions to meet customer needs, emphasising overall process efficiencies, productivity, quality improvement, and minimising downtime. What is IO-link?

Automation 98

Automation Function Logistics Beverage 98

Gary Mintchell

AUGUST 5, 2024

Those of us in process control have dealt with the problem of too many alarms demanding response, many of which are not critical. The post Tenable Unveils Vulnerability Intelligence Data and Response Capabilities appeared first on The Manufacturing Connection.

Bottleneck 147

Bottleneck Sourcing Process control Function 147

Control Engineering

JULY 12, 2023

smart manufacturing and digital transformation. be changing how stakeholders approach automation, controls and instrumentation? SIRI by INCIT is designed to help manufacturers assess and advance digital readiness. technologies have enabled a shift from reactive process to predictive and prescriptive ones. initiatives.

Industry 4.0 98

Industry 4.0 Industry 4.0 Smart manufacturing Manufacturing 98

Robotics Business Review

DECEMBER 4, 2024

Developing the new M16 connector was particularly challenging, said binder, because it had to comply with both the M16 standard (DIN EN 61076-2-106) and the stringent AISG standard (for the eight-pin shielded variant) in terms of IP68 sealing and compatibility between different manufacturers.

Quality Management System 52

Quality Management System Process control Fit Robotics 52

Gary Mintchell

JULY 10, 2024

The release empowers users to transition to a DeltaV DCS from more third-party control systems, expands support for Ethernet device networks, and reduces the complexity of state-based control implementations. The post Emerson Updates DeltaV Distributed Control System appeared first on The Manufacturing Connection.

Automation 147

Automation Function Process control Manufacturing 147

Control Engineering

SEPTEMBER 6, 2022

Rekha recently took on a technical project leadership role, driving ISA88: Batch Control in projects, and has been a valuable resource ensuring the best quality of product for customers. She is a well-respected process control and safety-certified engineer that leads by example and mentors other engineers to fulfill their potential.

Cycle time 98

Cycle time Function Automation Process control 98

Modern Machine Shop

FEBRUARY 20, 2024

With surface finish measurement, tighter dimensional tolerances often require additional information about the surface to ensure it functions per the design engineer’s requirements. Measuring surface finish at the point of manufacture is becoming more important — often by the same machinist who is manufacturing the part.

Function 105

Function Process control Manufacturing Automation 105

Gary Mintchell

APRIL 15, 2024

The newly expanded automation platform will include supervisory control and data acquisition (SCADA) systems, manufacturing execution systems (MES) and operations management software alongside the distributed control (DCS) and safety systems (SIS) and other technologies that have been part of the brand for decades. “The

Automation 147

Automation Manufacturing Execution System (MES) Beverage Aerospace 147

i4.0 today

FEBRUARY 6, 2025

Critical Manufacturing, a leader in advanced Manufacturing Execution Systems (MES) and a subsidiary of ASMPT, reports that it has been named a Leader in the IDC MarketScape: Worldwide Manufacturing Execution Systems 2024-2025 Vendor Assessment (doc #US51813624, November 2024).

Manufacturing Execution System (MES) 52

Manufacturing Execution System (MES) Manufacturing Process control Fit 52

Manufacturer's Monthly

FEBRUARY 17, 2025

Image: Gorodenkoff/shutterstock.com How a private mobile network can help manufacturers in Australia overcome their biggest challenges. Manufacturers in Australia and around the world are facing mounting pressure to boost profitability amid high inflation, rising interest rates, and escalating energy costs. technologies.

Industry 4.0 59

Industry 4.0 Industry 4.0 Automation Robotics 59

DO Supply

MARCH 24, 2025

As a result, manufacturers are continuously developing new automation technologies and innovative motion-control components that can retire legacy systems, allowing migration to more efficient, agile, and cost-effective solutions. Available in power ratings ranging from 0.5 to 600 Hp (0.37 to 125 Hp/0.37 to 93 kW at 200 to 240V AC 0.5

Function 52

Function Control Algorithm Electronics Automation 52

Gary Mintchell

OCTOBER 1, 2024

This group started as a response to the high cost of upgrading automation systems in the field in the process industries. The Open Group Open Process Automation Forum (OPAF) has developed the O-PAS Standard, a standard of The Open Group , which uses existing and emerging standards whenever possible, making it a standard of standards.

Automation 130

Automation Discrete manufacturing Fit Function 130

Control Engineering

JANUARY 4, 2023

Understand the shift toward the smart factory and the challenges process manufacturers face. Distributed control system (DCS) users are working toward eliminating the proprietary nature of automation and working toward a universal standard for process control industries. Learning Objectives.

Automation 98

Automation Control Algorithm Process control Industry 4.0 98

Control Engineering

MARCH 10, 2023

Embracing concepts and technologies such as artificial intelligence (AI), machine learning (ML) and smart manufacturing can help. In the past, upgrading a distributed control system (DCS) typically involved ripping out the old system and replacing it with a new one from a different vendor, or undergoing a hardware or software upgrade.

Pharmaceutical 98

Pharmaceutical Smart manufacturing Artificial Intelligence Benchmarking 98