Robotics Business Review

FEBRUARY 18, 2024

Knee replacement expectations for surgical robots may be misaligned, says study. Source: Adobe Stock Robotically assisted total knee arthroplasty, or TKA, has skyrocketed in popularity, but a new analysis of registry data has raised some questions about the benefits of surgical robots for knee-replacement patients. The analysis of American Joint Replacement Registry (AJRR) data, presented this week at AAOS 2024 in San Francisco, found that revision rates were similar in conventional and surgical

Robotics 119

Robotics Robotics Logistics Sourcing 119

Modern Machine Shop

FEBRUARY 18, 2024

The G550 was ARCH – Newtown’s first Grob machine, and first five-axis machine. It combined work previously requiring two turning operations and one milling operation, completing the job in half the time of the original process. The machine’s expanded capacity from its pallet system has also enabled the facility to use the G550 for other large parts, where it often cuts cycle times by as much as 50%.

Cycle time 111

Cycle time Robotics Robotics Fit 111

Metrology

FEBRUARY 18, 2024

With a Predictive Quality approach the quality of components is predicted in parallel with the process using AI models - based on production data acquired at high frequency. This enables 100% checks, reduces non-productive times and detects process errors at an early stage. The post Predictive Quality – What It Is and Who Can Benefit appeared first on Metrology and Quality News - Online Magazine.

98

98

Mold Making Technology

FEBRUARY 18, 2024

The Industrial Production Index on manufacturing holds significant implications for moldmaking, considering molds are integral components in product manufacturing. Source: CoPilot Moldmaking is a crucial element of manufacturing, playing a pivotal role in the production of numerous goods using industrial molds. In the U.S., the estimated value added by the manufacturing sector reached $2.3 trillion in the third quarter of 2023.

Electronics 80

Electronics Manufacturing Sourcing Form 80

Advertisement

In 2025, the Supply Chain continues its evolution toward “Logistics 4.0,” inspired by Industry 4.0. Two major characteristics define this transformation: automation, driven by robotic solutions, and prediction, paving the way for an era of planning and simulation powered by Artificial Intelligence (AI).

Supply Chain

Robotics Automation News

FEBRUARY 18, 2024

Fanuc, the world’s largest industrial robot maker, has introduced the new M-710iD/50M robot, representing the company’s first update to the popular M-710i robot series in 17 years.

Robotics 64

Robotics Robotics Automotive 64

Fabricating & Metal Work

FEBRUARY 18, 2024

Rust Revenge, new from Daubert Cromwell, is a water-based non-acidic, ready-to-use soaking liquid that removes rust without mixing or scrubbing. Environmentally friendly Rust Revenge, new from Daubert Cromwell, is a water-based, non-acidic, ready-to-use soaking liquid that removes rust without mixing or scrubbing. Tested and approved by leading OEMs, Rust Revenge begins to work in as little as five minutes.

Automotive 59

Automotive Manufacturing 59

Modern Machine Shop

FEBRUARY 18, 2024

Source: Okuma America Corp. Okuma America Corp. has announced the appointment of Wade Anderson to the position of vice president of the Engineering & Factory Automation Division for the Americas. This new role was created to optimally position Okuma to serve customer needs for evolving and next-generation manufacturing solutions. Anderson brings more than 30 years of machine tool industry experience to his new role, having held previous positions as a machinist, application engineer, sales e

Automation 52

Automation Sourcing Manufacturing 52

Robotics Automation News

FEBRUARY 18, 2024

Epson Robots has released its new GX-B Series SCARA robot models. The company says the new robots are engineered to help users “develop powerful automation solutions easily”.

Robotics 64

Robotics Robotics Automation 64

Metrology

FEBRUARY 18, 2024

Summary of headline metrology and smart manufacturing news from the past 7 days. The post ‘METROLOGY BREW’ News Bulletin – 19th February appeared first on Metrology and Quality News - Online Magazine.

Smart manufacturing 52

Smart manufacturing Manufacturing 52

Robotics Automation News

FEBRUARY 18, 2024

Stäubli, one of the world’s largest industrial robot suppliers, says it has become involved in innovative Computer Vision, AI, and robotics solutions development with the California-based OnSight Technology. Active since the early beginning of the Photovoltaic industry, Stäubli is a pioneer for durable and robust PV DC connectors.

Robotics 64

Robotics Robotics 64

Speaker: Chris Townsend, VP of Product Marketing, Wellspring

Over the past decade, companies have embraced innovation with enthusiasm—Chief Innovation Officers have been hired, and in-house incubators, accelerators, and co-creation labs have been launched. CEOs have spoken with passion about “making everyone an innovator” and the need “to disrupt our own business.” But after years of experimentation, senior leaders are asking: Is this still just an experiment, or are we in it for the long haul?

Metrology

FEBRUARY 18, 2024

Orders received by the German machine tool industry in the fourth quarter of 2023 were 17 percent down on the previous year's figure. The post No Economic Turnaround In Sight For German Machine Tool Orders appeared first on Metrology and Quality News - Online Magazine.

52

52

Frost & Sullivan Manufacturing

FEBRUARY 18, 2024

SAN ANTONIO, TX. – 19 th February 2023 – Recently, Frost & Sullivan assessed the customer experience outsourcing services industry and, based on its findings, recognizes Teleperformance with the 2024 Indian Company of the Year Award. The company is the leading global provider of outsourced, digital business services. It has nearly 500,000 customer experience (CX) experts and a strong industry presence, serving over 170 markets from 95 countries in more than 300 languages and dialects.

Artificial Intelligence 52

Artificial Intelligence 52

Metrology

FEBRUARY 18, 2024

By automating surface finishing tasks, the system ensures consistent and precise results every time. Robots equipped with advanced sensors and algorithms can perform repetitive tasks with high accuracy, reducing the risk of errors and improving overall efficiency. The post Integrated 3D Vision Cameras and AI Enhance Precise Surface Inspection appeared first on Metrology and Quality News - Online Magazine.

Robotics 52

Robotics Robotics Automation 52

Manufacturing Tomorrow

FEBRUARY 18, 2024

New Energy Vehicle Liquid Cooling Plate Helium Detection Equipment Device characteristics: 1. It is suitable for large leak detection and helium mass spectrometry air tightness detection of liquid cooling plates; 2. The automatic control system can adapt to 24 hours of uninterrupted operation every day; 3.

52

52

Advertisement

Large enterprises face unique challenges in optimizing their Business Intelligence (BI) output due to the sheer scale and complexity of their operations. Unlike smaller organizations, where basic BI features and simple dashboards might suffice, enterprises must manage vast amounts of data from diverse sources. What are the top modern BI use cases for enterprise businesses to help you get a leg up on the competition?

Sourcing

Metrology

FEBRUARY 18, 2024

Leuze has announced its new 2-in-1 sensor that detects the presence of objects while at the same time transmits measurement values. The post 2-in-1 Sensor Detects Object Presence and Transmits Measurement Values appeared first on Metrology and Quality News - Online Magazine.

52

52

Fabricating & Metal Work

FEBRUARY 18, 2024

Key Features and Enhancements of SprutCAM X and SprutCAM X Robot 17.0.12 include: Plunge Parameters: Users can now specify tool design features like the maximal ramp angle and minimal cut diameter. The machining simulation will take these parameters into account and provide an error message if the values exceed the specified limits. In certain situations, it is necessary to customize the tool plunge parameters independently of the tool’s predefined specifications.

Robotics 52

Robotics Robotics Function 52

Metrology

FEBRUARY 18, 2024

Machine vision, a field of artificial intelligence (AI) and computer vision, empowers machines with the ability to interpret and understand the visual world. The post The Increasing Role of Machine Vision in Robotic Automation Creating a Paradigm Shift in Improving Manufacturing Quality appeared first on Metrology and Quality News - Online Magazine.

Artificial Intelligence 52

Artificial Intelligence Robotics Robotics Automation 52

Fabricating & Metal Work

FEBRUARY 18, 2024

SMX Industrial Solutions, a leading provider of advanced steel fabrication solutions, proudly announces the appointment of Neal Glassett as the company’s Vice President and Chief Financial Officer. Mr. Glassett brings a wealth of experience and expertise in financial management, strategic planning, and business development to his new role. With a proven track record in driving financial success for companies in various industries, Mr.

Compliance 52

Compliance Manufacturing 52

Advertisement

Manufacturing

Min-Hui

FEBRUARY 18, 2024

Good luck on the first day of work after the Chinese New Year. In the past year, MINHUI has faced various challenges and difficulties, but in the new year, we set new goals and strive for higher achievements. The new year is a fresh start and the beginning of new opportunities. With a new attitude … Good luck on starting work! Read More » The post Good luck on starting work!

52

52

Fabricating & Metal Work

FEBRUARY 18, 2024

When the OTTOSTAHL GmbH had to replace an old rotary table shot blast machine, the company insisted on short cycle times, high energy efficiency and relieving the personnel from strenuous and monotonous physical activities. These challenging demands were met by Rösler and the automation specialist Teqram with the universally usable rotary table Easy Shotblaster RDT 150, equipped with a stationary “intelligent” robot.

Cycle time 52

Cycle time Robotics Robotics Automation 52

Modern Machine Shop

FEBRUARY 18, 2024

Photo Credit: Fryer Machine Systems Inc. Fryer Machine Systems ’ VB series of vertical machining centers are built in the U.S. and designed for easy loading of large parts. Designed without an enclosure, the open design, large frame and rugged construction enables for versatility in production and job-shop applications. The VB series features five machines ranging from 60" X travel all the way to 160" X travel.

52

52

Fabricating & Metal Work

FEBRUARY 18, 2024

A new Tilt-Down Flexible Screw Conveyor System is mounted on a portable base with a multi-purpose hood and an integral dust collector. This allows manual dumping from handheld sacks as well as discharging from bulk bags, subsequently transferring material to elevated downstream process equipment and storage vessels at multiple plant locations, dust free.

Automation 52

Automation Manufacturing 52

Advertisement

Unlock the full potential of CNC machining with our comprehensive design guide. Learn how to optimize your designs for precision, efficiency, and cost savings. Gain key insights on part complexity, tolerances, materials, finishes, and much more. Whether you’re developing prototypes or production parts, our guide offers practical tips to streamline your process and ensure high-quality results.

Prototype 

Modern Machine Shop

FEBRUARY 18, 2024

Source: Hemco Corp. Hemco Corp. designs specialized enclosures for robots and other lab automated processes by providing exhaust air systems or HEPA-filtered clean workstations. The enclosures are built to protect robotic processes from contamination and personnel from hazardous fumes. Using a flexible, modular design, the enclosures are engineered and built to exact customer size and design requirements.

Robotics 52

Robotics Robotics Sourcing Automation 52

Fabricating & Metal Work

FEBRUARY 18, 2024

Monaghan Tooling Group was named the exclusive U.S. distributor for Vergnano, a global leader in precision taps and hobs. A wide range of standard tap designs are available for applications such as general-purpose machining, high performance, synchronized tapping, or carbide tap designs. In addition to an industry-leading selection with more than 5,000 standard taps, Vergnano can design custom taps and deliver them with short lead times.

Aerospace 52

Aerospace Lead Time Automotive Manufacturing 52

Control.com

FEBRUARY 18, 2024

Festo has developed new life science automation solutions, including a flexible pipetting system. The system is designed to deliver wide-range pipette dispensing from 20 microliters to 20 milliliters.

Automation 52

Automation 52

Fabricating & Metal Work

FEBRUARY 18, 2024

New piCOBOT® plug & play configuration for FANUC CRX cobots. Piab continues the journey to make our foremost cobot tool family available to all end users. We now offer piCOBOT® and piCOBOT®L in completely FANUC CRX adapted versions. Plug & Play in every aspect. Piab’s clever end-of-arm-tool piCOBOT® has so far had almost a decade of prosperity on the market for cobot equipment.

Automation 52

Automation Fit Robotics Robotics 52

Speaker: Nikhil Joshi, Founder & President of Snic Solutions

Is your manufacturing operation reaching its efficiency potential? A Manufacturing Execution System (MES) could be the game-changer, helping you reduce waste, cut costs, and lower your carbon footprint. Join Nikhil Joshi, Founder & President of Snic Solutions, in this value-packed webinar as he breaks down how MES can drive operational excellence and sustainability.

Manufacturing Execution System (MES)

DO Supply

FEBRUARY 18, 2024

Omron CPM1 and CPM2 are popular programmable logic controllers (PLCs) used in various industrial automation applications. While they share some similarities, there are also key differences between them. This article provides a comparative analysis of these two PLC series, highlighting their specifications, features, and strengths to help you choose the best option for your specific… The post Omron CPM1 vs CPM2: A Comparative Analysis first appeared on Do Supply Tech Support.

Automation 40

Automation 40

Fabricating & Metal Work

FEBRUARY 18, 2024

When purchasing a new machine, a customer can buy a duMONT CNC slotter from Pilot Precision Products or Global CNC. Pilot Precision Products (Pilot), a manufacturer of cutting tools and a supplier of duMONT CNC motorized slotters, is teaming up with Global CNC, a manufacturer of static and driven tool holders, to offer solutions that enable efficient and stable broaching on vertical and horizontal machining centers such as those manufactured by Okuma, Mazak, DMG Mori and more.

Cycle time 52

Cycle time Fit Manufacturing 52

Manufacturing Tomorrow

FEBRUARY 18, 2024

The new release elevates supplier quality standards and builds a foundation for AI adoption

Aerospace 40

Aerospace 40

Fabricating & Metal Work

FEBRUARY 18, 2024

Reducing scrap metal is necessary not only to protect the downstream equipment during further processing, but also promote consistent and efficient results. Metalworking companies that are thinking about updating their metal scrap processing equipment have a lot to consider — especially with how frequently production takes priority over waste management.

Form 52

Form Function Sourcing Automation 52

Advertisement

Finding the right innovation management software is like picking a racing bike—it's essential to consider your unique needs rather than just flashy features. This oversight can stall your innovation efforts. Download now to explore key considerations for success!