Gary Mintchell

MARCH 1, 2024

Modern flow control software driver based on FDT/DTM technology extends standardized device management to mobile and OPC UA applications. Glad to see movement with the latest technology from the FDT Group. It certified the first Device Specific DTM based on FDT 3.0 standard supporting the HART protocol from Flowserve Corp. The newest certified Logix 3820 Series DTM is deployable using their positioners supporting HART 6 / 7, tackling flow control challenges designed for modern IIoT architectures

Compliance 147

Compliance Function Manufacturing Automation 147

Design World

MARCH 1, 2024

Belden announced new products around data orchestration and management and data acquisition and transmission that enable better connectivity, faster speeds, and more power to help mission-critical environments perform at their peak. The data orchestration and management products include: Belden Horizon Console includes enhancements that allow organizations to take greater control of data collection and transfer.… The post Belden launches data acquisition and orchestration products for miss

130

130

Gary Mintchell

MARCH 1, 2024

New OT threat groups include VOLTZITE linked to Volt Typhoon; ransomware attacks grew 50 percent; state actors and unsophisticated hacktivist groups gained ground against OT systems. Cybersecurity companies busily conduct surveys and issue reports. This news concerns Dragos’ release of its sixth annual OT Cybersecurity Year in Review report. The report named the emergence of three new threat groups, including VOLTZITE linked to Volt Typhoon, and found that ransomware continued to be the most re

Manufacturing 130

Manufacturing 130

Design World

MARCH 1, 2024

ABB and CERN, the European Laboratory for Particle Physics, have identified significant energy-saving potential through a strategic research partnership focused on the cooling and ventilation system at one of the world’s leading laboratories for particle physics institutes, located in Geneva, Switzerland. The study included energy efficiency audits which have helped to identify a savings potential… The post ABB and CERN find energy-saving opportunity in heating and ventilation motors appea

130

130

Advertisement

In 2025, the Supply Chain continues its evolution toward “Logistics 4.0,” inspired by Industry 4.0. Two major characteristics define this transformation: automation, driven by robotic solutions, and prediction, paving the way for an era of planning and simulation powered by Artificial Intelligence (AI).

Supply Chain

Robotics Business Review

MARCH 1, 2024

2024 is heating up for the robotics industry. In February we saw new product launches, and some companies in hot water with funding losses or shutdowns. It was an exciting month for the industry, and there was no shortage of robotics new to cover. Here are the top 10 most popular stories on The Robot Report in February 2024. Subscribe to The Robot Report Newsletter or listen to The Robot Report Podcast to stay updated on the robotics stories you need to know about. 10.

Robotics 126

Robotics Robotics Fit Form 126

NIST Manufacturing

MARCH 1, 2024

Six universities will create programs to help develop solutions to problems created by the production and consumption of plastics.

124

124

Control.com

MARCH 1, 2024

Adding to its existing SmartAXIS Touch family, Idec has released the FT2J Series combined PLC+HMI for compact and simplified control. The combined solution features a 7-inch touchscreen display and expandable I/O.

105

105

E&T

MARCH 1, 2024

Export violations included technical military data being downloaded by employees in China.

105

105

Gary Mintchell

MARCH 1, 2024

Every time I participate in a survey the last page is an invitation to do my own survey. I think every industry marketing person has take them up on the offer. Limble CMMS has released State of Manufacturing and Facilities Maintenance Report , which reveals insights from manufacturing and facility maintenance professionals on the top challenges they face today and what their immediate focus is on.

Manufacturing 100

Manufacturing Supply Chain 100

E&T

MARCH 1, 2024

New data from the IEA reveals that in 2023 global energy-related carbon emissions slowed down compared with the previous year.

104

104

Speaker: Chris Townsend, VP of Product Marketing, Wellspring

Over the past decade, companies have embraced innovation with enthusiasm—Chief Innovation Officers have been hired, and in-house incubators, accelerators, and co-creation labs have been launched. CEOs have spoken with passion about “making everyone an innovator” and the need “to disrupt our own business.” But after years of experimentation, senior leaders are asking: Is this still just an experiment, or are we in it for the long haul?

SMMT

MARCH 1, 2024

The Spring Budget in just five days’ time is a pivotal moment for government to re-energise the EV market. The Chancellor must use the occasion to end the UK’s current fiscal system that is, in effect, discouraging drivers from going green, with action needed to reduce VAT on electric vehicles so that all new EV buyers – not just businesses and fleets – are afforded an incentive to buy.

Automotive 72

Automotive Manufacturing 72

Cisco Smart Manufacturing

MARCH 1, 2024

Executive Summary. 1 The Team… 2 Team Leaders. 2 Core Infrastructure and Threat Hunting. 2 Threat Hunting. 2 Build and Operation. 2 SOC Architecture.

70

70

Plastics Today

MARCH 1, 2024

From myth busting to bag banning and so much more, PlasticsToday’s monthly top 10 proves once again that variety is the spice of the plastics business.

64

64

Cisco Smart Manufacturing

MARCH 1, 2024

Meraki’s smart cameras offer businesses an easy-to-deploy way to monitor their physical security, with the added benefit of being managed entirely on the cloud.

62

62

Advertisement

Large enterprises face unique challenges in optimizing their Business Intelligence (BI) output due to the sheer scale and complexity of their operations. Unlike smaller organizations, where basic BI features and simple dashboards might suffice, enterprises must manage vast amounts of data from diverse sources. What are the top modern BI use cases for enterprise businesses to help you get a leg up on the competition?

Sourcing

The Fabricator

MARCH 1, 2024

Evapco Inc., a manufacturer of evaporative cooling and industrial refrigeration products, is expanding its Taneytown, Md., operations for the second time in a decade.

Manufacturing 59

Manufacturing 59

E&T

MARCH 1, 2024

The first US spacecraft to land on the surface of the Moon for over 50 years has lost transmission.

59

59

The Fabricator

MARCH 1, 2024

Airmo Inc. Pressure Technologies, Minneapolis, has named Lucas Schmit as customer relationship engineer.

59

59

E&T

MARCH 1, 2024

The tax system is failing to address the cost of the emissions, air pollution and safety concerns of large, luxury cars.

59

59

Advertisement

Manufacturing

The Fabricator

MARCH 1, 2024

Under the leadership of TRUMPF, the XProLas development partnership has started to develop compact, laser-driven X-ray sources for inspecting electric vehicle batteries.

Sourcing 59

Sourcing 59

Frost & Sullivan Manufacturing

MARCH 1, 2024

In the past few years, event teams have experienced fundamental shifts in their approach, execution, and expectations for events. Event volumes are rebounding toward pre-pandemic levels, but the restaffing of many event management teams has not kept pace. Many organizations have been left trying to meet rising demand with fewer resources, all while seeking to understand the role of technology in an evolving landscape.

59

59

The Fabricator

MARCH 1, 2024

Kemppi’s new Zeta Fresh Air welding helmets come with a respirator for safe breathing while also offering eye and face protection.

59

59

NIST Manufacturing

MARCH 1, 2024

In January 2024, NIST researchers Allison Barnard Feeney and Rosemary Astheimer worked with Ben Urick (nVariate) and Thomas Thurman (TRThurman Consulting) to implement a hybrid boundary-representation (b-rep) modeling capability in ISO 10303 Product

52

52

Advertisement

Unlock the full potential of CNC machining with our comprehensive design guide. Learn how to optimize your designs for precision, efficiency, and cost savings. Gain key insights on part complexity, tolerances, materials, finishes, and much more. Whether you’re developing prototypes or production parts, our guide offers practical tips to streamline your process and ensure high-quality results.

Prototype 

Plastics Today

MARCH 1, 2024

Ford will factory-install PPG’s latest matte clear film for Mustang buyers seeking a satin finish.

52

52

NIST Manufacturing

MARCH 1, 2024

NIST published Physical Component Libraries for SysPhS Modeling and Simulation in Manufacturing , a NIST interagency report (NIST IR 8490) by Charlie Manion, Conrad Bock, and Raphael Barbau that significantly expands the capabilities of the SysML

Manufacturing 52

Manufacturing 52

Manufacturing Tomorrow

MARCH 1, 2024

The ABI BoardMaster is a versatile, easy-use all-in-one board tester, and, when combined with a custom bed-of-nails or test fixture, can quickly form the basis of an automated test station for manufactured or repetitive-test PCB assemblies.

Manufacturing 52

Manufacturing Form Automation 52

NIST Manufacturing

MARCH 1, 2024

NIST’s Systems Analysis Integration (SAI) project was invited to present its research to the NASA Jet Propulsion Laboratory (JPL) Systems Engineering Solutions Group and members of the Open Model Based Engineering Environment project (OpenMBEE), an

52

52

Speaker: Nikhil Joshi, Founder & President of Snic Solutions

Is your manufacturing operation reaching its efficiency potential? A Manufacturing Execution System (MES) could be the game-changer, helping you reduce waste, cut costs, and lower your carbon footprint. Join Nikhil Joshi, Founder & President of Snic Solutions, in this value-packed webinar as he breaks down how MES can drive operational excellence and sustainability.

Manufacturing Execution System (MES)

Canadian Manufacturing

MARCH 1, 2024

Can-Eng Furnaces subsidiary signs partnership with Suzhou Kilnpartner (Credit: Can-Eng Furnaces) EVERGREEN KILN TECHNOLOGIES, LLC, located in Niagara Falls, USA & SUZHOU KILNPARTNER Mechanical Technology Co., Ltd., located in China, officially announce the strategic partnership between both parties. This Partnership was developed to service and support the growing demands of the North American Lithium-ion battery market.

Form 52

Form Manufacturing 52

NIST Manufacturing

MARCH 1, 2024

At the 2023 International Conference on System Reliability and Safety (ICSRS) in Bologna, Italy, NIST researcher Mehdi Dadfarnia presented research findings that aim to help manufacturers understand the risks and benefits of integrating AI-based

Manufacturing 52

Manufacturing 52

Mold Making Technology

MARCH 1, 2024

Source | Progressive Components Progressive Components announces the recent expansion of its RhinoFeet product line by introducing a new 5" tall version for larger tools and mold plates. Initially released in 2020, Progressive’s RhinoFeet have been established as a simple, safe and efficient solution for elevating and storing heavy items within the shop.

Sourcing 52

Sourcing 52

NIST Manufacturing

MARCH 1, 2024

On February 28-29, 2024, the NIST Automated Vehicles team , representing multiple NIST laboratories, visited the Virginia Tech Transportation Institute (VTTI) site in Blacksburg, VA.

Automation 52

Automation 52

Advertisement

Finding the right innovation management software is like picking a racing bike—it's essential to consider your unique needs rather than just flashy features. This oversight can stall your innovation efforts. Download now to explore key considerations for success!