Gary Mintchell
JANUARY 10, 2024
This may sound surprising (although it shouldn’t). General media promotes a lot of hype and dire warnings and smoke-and-mirrors about large language models (LLM)—the latest type of augmented (artificial) intelligence. Do you think that if you could even get a peek into the math and technology that you could at least have a better grip on risk and reward?
Design World
JANUARY 10, 2024
The recently elected 2024 Board of Directors and Manufacturer Council of the Power Transmission Distributors Association (PTDA) begin their leadership terms. Brian Nowak, president & CEO, Kurz Industrial Solutions, Neenah, Wisconsin, assumes the leadership of the association as president. Nowak began volunteering for PTDA in 2015, serving on the Education & Training Committee.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Robotics Business Review
JANUARY 10, 2024
The world set a record with 3.9 million operational robots in 2022, according to the new World Robotics report from the International Federation of Robotics (IFR). The report also included information about robot density worldwide. Robot density measures the number of operational industrial robots per 10,000 employees in a country. “Robot density data reveal the state of automation worldwide and allow us to compare regions and countries,” Marina Bill, President of the IFR, said.
Automation World
JANUARY 10, 2024
Combining Siemens Xcelerator software with a new VR headset from Sony will enable engineers to explore design concepts in an immersive workspace.
Advertisement
Large enterprises face unique challenges in optimizing their Business Intelligence (BI) output due to the sheer scale and complexity of their operations. Unlike smaller organizations, where basic BI features and simple dashboards might suffice, enterprises must manage vast amounts of data from diverse sources. What are the top modern BI use cases for enterprise businesses to help you get a leg up on the competition?
Robotics Business Review
JANUARY 10, 2024
The IAC has revised the sensors and compute in the AV24 racecar. Source: Indy Autonomous Challenge The Indy Autonomous Challenge, or IAC, made two major announcements at CES 2024 this week. The first was that the IAC plans to present four autonomous racecar events in 2024, and the second was an updated technology stack. The first event of the year is the IAC@CES, which takes place tomorrow at the Las Vegas Motor Speedway.
Control.com
JANUARY 10, 2024
Converting different numbering systems is quite common in PLCs and structured text codes. Why? Because people read decimals. Computers read binary. Processors read sets of bits. Not so simple.
Manufacturing Technology Today brings together the best content for manufacturing technology professionals from the widest variety of industry thought leaders.
Canadian Manufacturing
JANUARY 10, 2024
Magna’s next gen eDrive offers supplier industry-first technology in a lighter weight, compact, sustainable solution AURORA — As CES 2024, Magna announced the global unveiling of its 800V eDrive solution. Magna’s eDrive is a drop-in solution that incorporates several advanced technologies, reportedly resulting in reductions in weight and size, enhanced performance, extended driving range and sustainability.
Robotics Business Review
JANUARY 10, 2024
Source: EndoQuest EndoQuest Robotics Inc. and Omnivision have partnered to integrate Omnivision’s CameraCubeChip into EndoQuest’s surgical robotic system. Santa Clara, Calif.-based Omnivision develops semiconductor systems, including advanced digital imaging and touch display technology. Houston-based EndoQuest designed its system to address unmet needs in gastrointestinal and other endoluminal surgeries.
Canadian Manufacturing
JANUARY 10, 2024
Geotab Announces Sustainability Alliance to Support Companies with Electrification and Decarbonization (CNW Group/Geotab Inc.) TORONTO — Geotab Inc. a technology company involved in transportation solutions, announced the Geotab Sustainability Alliance, a group of solution and service providers dedicated to creating solutions that help fleets operate efficiently and reduce their carbon footprint.
Manufacturer's Monthly
JANUARY 10, 2024
TAFE SA enrolments are continuing to soar – bolstered by the South Australian Government’s Fee Free TAFE – with a rise of 65 per cent compared to two years ago. More than 10,600 places were used for fee free study at TAFE SA in 2023 creating more skilled workers in areas that directly align with the SA Government’s priorities including investing in our health system, preparing for universal 3-year-old preschool, delivering the infrastructure South Australia needs and building t
Control.com
JANUARY 10, 2024
The new analog converter from WAGO helps users convert 4-20 mA analog signals into digital data that is transferable to upper-level communication systems via IO-Link.
Manufacturer's Monthly
JANUARY 10, 2024
The Australian Government is investing in critical infrastructure to support Australia’s air combat capability with a $4 million upgrade at Defence ’s largest operational air base, RAAF Base Amberley near Ipswich in Queensland. Ensuring the Australian Defence Force (ADF) has modern, fit-for-purpose facilities and infrastructure in place to support its critical capabilities is essential to keeping Australians safe.
Plastics Today
JANUARY 10, 2024
The market for bioplastics has been limited by price, performance, availability, and applicability. That may be changing.
Cisco Smart Manufacturing
JANUARY 10, 2024
Do you feel a bit lost when people refer to certain environmental sustainability topics and aren’t sure where to start when it comes to learning more?
Advertisement
Unlock the full potential of CNC machining with our comprehensive design guide. Learn how to optimize your designs for precision, efficiency, and cost savings. Gain key insights on part complexity, tolerances, materials, finishes, and much more. Whether you’re developing prototypes or production parts, our guide offers practical tips to streamline your process and ensure high-quality results.
Plastics Today
JANUARY 10, 2024
The fully recyclable blister pack containing 30% PCR plastic waste meets stringent pharmaceutical quality standards.
Cisco Smart Manufacturing
JANUARY 10, 2024
In the rapidly evolving retail sector, businesses are continually seeking innovative ways to gain a competitive edge, increase efficiency, and enhance the customer experience.
Canadian Manufacturing
JANUARY 10, 2024
VANCOUVER — West Fraser Timber Co. Ltd. announced that it will close its sawmill in Maxville, Florida and indefinitely curtail operations at its sawmill in Huttig, Arkansas by the end of this month. West Fraser says the decision is the result of high fiber costs and soft lumber markets. The closure of Maxville Sawmill will impact approximately 80 employees, while the indefinite curtailment of Huttig will impact 140 employees.
The Fabricator
JANUARY 10, 2024
The Bradbury Group, Moundridge, Kan., a manufacturer of roll forming and coil processing equipment, has acquired the assets of Press Room Equipment Co. (PRE), Springfield, Mo.
Speaker: Nikhil Joshi, Founder & President of Snic Solutions
Is your manufacturing operation reaching its efficiency potential? A Manufacturing Execution System (MES) could be the game-changer, helping you reduce waste, cut costs, and lower your carbon footprint. Join Nikhil Joshi, Founder & President of Snic Solutions, in this value-packed webinar as he breaks down how MES can drive operational excellence and sustainability.
Canadian Manufacturing
JANUARY 10, 2024
SURREY — RecycLiCo Battery Materials Inc., a company involved in sustainable lithium-ion battery recycling technology, announces that the Company’s recycled lithium carbonate, from lithium-ion battery waste, has passed a comprehensive suite of tests conducted by a battery materials company in Asia. RecycLiCo’s lithium carbonate, contained in a Lithium Iron Phosphate (LFP) battery, was subjected to several industry-standard tests, including LFP fabrication and cell testing.
The Fabricator
JANUARY 10, 2024
Cortec Corp. has developed MCI-2061, an environmentally friendly cleaner designed to remove oil stains from concrete, asphalt, and other hard surfaces such as fixtures and equipment without harsh chemicals or solvents.
Automation Mag
JANUARY 10, 2024
Endress+Hauser has announced the appointment of Dr. Peter Selders as the new CEO of the company. Selders takes over from Matthias Altendorf, who after leading the company from the top position for 10 years, will be moving on to its supervisory board. Selders holds a doctorate in physics. He has been with the company since 2004 and was previously managing director of the competence centre for level and pressure measurement technology based in Maulburg, Germany.
The Fabricator
JANUARY 10, 2024
What used to be cut with solely oxygen or nitrogen now uses a mix of both. Laser assist gas mixing has been a key enabling technology, and today’s ultrahigh-powered fiber lasers couldn’t cut the way they do without it.
Advertisement
Finding the right innovation management software is like picking a racing bike—it's essential to consider your unique needs rather than just flashy features. This oversight can stall your innovation efforts. Download now to explore key considerations for success!
Plastics Today
JANUARY 10, 2024
Nova-Institute GmbH is critical of aspects of the JRC Plastics Life Cycle Assessment (LCA) methodology and the associated policy implications for these essential packaging materials.
The Fabricator
JANUARY 10, 2024
MetlSaw Systems, a manufacturer of precision plate and extrusion sawing equipment in Benicia, Calif., has announced its integration into the Inductotherm Group.
Manufacturer's Monthly
JANUARY 10, 2024
A Deakin University-led Quantum Computing project will benefit from rising research talent, thanks to a funding boost through CSIRO’s $3.6 million Next Generation Quantum Graduates Program. The Distributed Quantum Computing: Algorithms and Software project was one of four projects to receive funding from the national scientific research agency, which supports 16 PhD scholarships for projects across 11 Australian universities.
Marshall Wolf Automation
JANUARY 10, 2024
Recently, WEG came to our the office to provide us with training on the CFW500 VFD. We love a good training session because it helps us better serve our customers when we’re well-versed in the products we sell. We wanted to take this opportunity to share some of our new knowledge with you! What We Learned WEG CFW500 high-performance variable speed drive is available in.33HP – 75HP and 200-600V so they can be used in a wide range of applications.
Advertisement
Sit down with Karan Talati, CEO of First Resonance, to explore the significant contributors to waste in the manufacturing industry. Karan delves into two critical areas: material waste and data waste. He discusses how material waste impacts costs and efficiency, and the often-overlooked issue of data waste—where valuable data is not captured, leading to inefficiencies in managing inventory and operations.
Metrology
JANUARY 10, 2024
While overall manufacturing technology orders for the year were down compared to their near-record levels in 2022, several regions and industries saw a late-year rally, showing strong order activity through November 2023. The post U.S. Manufacturing Technology Orders Fall Despite Economy’s Soft Landing appeared first on Metrology and Quality News - Online Magazine.
Mold Making Technology
JANUARY 10, 2024
TK Mold & Engineering operates with a team of 25, plus seven CNC machines, multiple lathes and drills, and a five-axis sinker EDM from two facilities totaling 25,800 square feet/2,397 square meters of space in Romeo, Michigan. Photo Credit: TK Mold & Engineering Romeo, Michigan-based TK Mold & Engineering Inc. was founded in 2003 by Tom and Krista Barr, who purchased assets and a building that had previously housed another moldmaker.
Metrology
JANUARY 10, 2024
Next generation camera platform and imaging software leverage years of machine vision GigE camera design expertise and customer understanding to deliver best-in-class imaging reliability, quality, and performance. The post Best-in-Class Imaging Solutions For Demanding Factory Automation Applications appeared first on Metrology and Quality News - Online Magazine.
Manufacturer's Monthly
JANUARY 10, 2024
Researchers at The University of Queensland (UQ) are developing new 4D printing technology that produces shape-shifting liquid metals for soft robotics. 4D printing is an extension of 3D printing, where solid objects are created using materials that can change shape when exposed to certain stimuli like heat, water or light. At UQ’s Australian Institute for Bioengineering and Nanotechnology (AIBN), researchers are printing 4D structures using new liquid metal polymers that can be coaxed into perf
Advertisement
Pursuing product portfolio management excellence empowers organizations to unlock the full potential of their offerings. This comprehensive guide unveils 10 essential keys that serve as the building blocks for success.
Expert insights. Personalized for you.
147 
Let's personalize your content