HGR Inc.

DECEMBER 8, 2022

At Automation Fair 2022 and its accompanying Process Solutions User Group event, Rockwell Automation devoted a great deal of focus to three issues it sees as critical to industry’s future: cybersecurity, sustainability, and workforce enablement. Consumer goods, in particular pharmaceutical preparations, slipped as well.

Supply Chain 89

Supply Chain Robotics Robotics Consumer Goods 89

Robotics Business Review

APRIL 5, 2024

The Manufacturing of Garments and Other Textile Goods will be included as a special topic area in the ARM Institute’s upcoming Technology Project Call. Beyond impact for consumer goods and national security, reshoring apparel manufacturing also represents opportunity for the U.S. Register now for the event.

Apparel 125

Apparel Robotics Robotics Manufacturing 125

AU Manufacturing

AUGUST 29, 2022

The research places Australia in the third most vulnerable position when projecting the future economic impact of these events in seven countries. This is the first time that the economic impact of these three types of events have been calculated at a GDP and sector level. due to water risks such as droughts, floods, and storms. .

Consumer Goods 70

Consumer Goods Sourcing Manufacturing 70

Manufacturer's Monthly

AUGUST 29, 2023

SEMMA CEO Honi Walker opened the event outlining the humble beginnings of the alliance and celebrated what it has become. “If Major Australian manufacturing sectors (footwear, fashion, light consumer goods) went offshore for financial reasons and the age of mass consumerism and the internet changed our buying habits,” she said.

Supply Chain 98

Supply Chain Consumer Goods Manufacturing Logistics 98

Control Engineering

NOVEMBER 17, 2022

“Now is the opportunity for companies to take their business to the next level at the most important automation event in 2023,” said Jeff Burnstein, president of A3 in a press release. It’s where you’ll learn how to power your productivity, become more efficient, gain a competitive edge, and future-proof your business for years to come.”.

Automation 52

Automation Artificial Intelligence Consumer Goods Logistics 52

MEM

APRIL 25, 2023

With a highly specialised profile, Chemspec Europe is a key event for the fine and speciality chemicals industry, taking place from 24-25 May at the Messe Basel exhibition centre in Switzerland. Our focus is aligned across the next 12 months with our global media partnerships around Trade Events and also contains original content.

Consumer Goods 52

Consumer Goods Electronics Composites Aerospace 52

i4.0 today

OCTOBER 9, 2024

Designs that grow with children, for example, adapt to their developmental stages and can therefore be used for longer, are in contrast to fast-moving consumer goods (FMCG). The Red Dot Award Ceremony is an extraordinary event with great appeal. Material and energy-efficient construction “Less is more!”

Consumer Goods 52

Consumer Goods Industry 4.0 Industry 4.0 52

AU Manufacturing

AUGUST 29, 2022

The aerospace sector averaged the highest end-use part CAGR rate across all technologies, closely followed by consumer goods. SmarTech is a division of 3DR Holdings, a b2b technology media company providing news, research and events for the 3D printing and quantum technology industries.

3D printing 72

3D printing Additive manufacturing Prototype  Manufacturing 72

MEM

DECEMBER 7, 2022

Throughout the event, the CGTech team will give demonstrations of their industry leading solutions for verification, simulation and optimisation of NC programs, including the latest features available in VERICUT 9.3, VERICUT is the industry standard in simulating CNC machining to detect errors, potential collisions, and areas for improvement.

Manufacturing 52

Manufacturing Electronics Consumer Goods Composites 52

i4.0 today

SEPTEMBER 4, 2023

With the four-day event expected to attract over 60,000 visitors, General Manager Paolo Zirondoli highlights the importance of the Italian market and sector opportunities. Packaging and medical are continuing to perform strongly and consumer goods remains as important as ever.

Automation 52

Automation Consumer Goods Industry 4.0 Industry 4.0 52

Mold Making Technology

NOVEMBER 24, 2024

This team is involved in the design, development and maintenance of high-precision molds, including multi-cavity and complex molds used in various industries such as automotive, medical and consumer goods. MPC also participates in local events like the LEVEL UP skilled trades open house and the Ontario Apprenticeship Summit.

Cycle time 52

Cycle time Automotive Lead Time 3D printing 52

MEM

MARCH 13, 2023

Our focus is aligned across the next 12 months with our global media partnerships around Trade Events and also contains original content. We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally).

Consumer Goods 52

Consumer Goods Value chain Electronics Composites 52

MEM

DECEMBER 8, 2022

Our focus is aligned across the next 12 months with our global media partnerships around Trade Events and also contains original content. We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally).

Consumer Goods 52

Consumer Goods Electronics Composites Aerospace 52

i4.0 today

AUGUST 1, 2024

This is the industry event for connecting innovative product suppliers with influential decision-makers in search of next-generation solutions that enhance their organisation’s efficiency, agility and scalability. As a multi-experience event, IntraLogisteX USA offers an elite programme that is beyond industry compare.

Supply Chain 59

Supply Chain Logistics Warehousing Consumer Goods 59

MEM

APRIL 26, 2023

Our focus is aligned across the next 12 months with our global media partnerships around Trade Events and also contains original content. We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally).

Consumer Goods 52

Consumer Goods Electronics Composites Aerospace 52

i4.0 today

MAY 25, 2023

The entire exhibition will observe sustainable event management system specified by ISO 20121 and aims to make the BenQ Group the world’s first and only ISO 20121 certified group at COMPUTEX since the exhibition’s establishment in 1981. Customers are implementing smartization the most quickly out of the strong demands for sustainable values.

Consumer Goods 52

Consumer Goods Compliance Sourcing Manufacturing 52

MEM

APRIL 12, 2023

Our focus is aligned across the next 12 months with our global media partnerships around Trade Events and also contains original content. We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally).

Consumer Goods 52

Consumer Goods Electronics Composites Aerospace 52

MEM

DECEMBER 8, 2022

Our focus is aligned across the next 12 months with our global media partnerships around Trade Events and also contains original content. The post Danfoss Power Solutions’ New SLP13 Solenoid Cartridge Valve Delivers More Flow While Consuming Less Power appeared first on Manufacturing & Engineering.

Consumer Goods 52

Consumer Goods Electronics Composites Aerospace 52

i4.0 today

NOVEMBER 7, 2024

Explore a new blue ocean in ASEAN markets and create a packaging industrial chain gala Organized by RX, WEPACK ASEAN is an international trade gala event specifically crafted for the Southeast Asian packaging industrial chain based on global packaging industrial chain resources accumulated over the past 30-odd years.

Logistics 52

Logistics Consumer Goods Form Manufacturing 52

Fastener News Desk

JANUARY 28, 2023

This was due to further growth in underlying demand in markets tied to industrial capital goods and commodities, which more than offset softer markets tied to consumer goods and relatively lower growth in construction. Foreign exchange negatively affected sales in the fourth quarter of 2022 by approximately 90 basis points.

Supply Chain 52

Supply Chain Consumer Goods 52

Control Engineering

AUGUST 17, 2023

Organizers are calling Pack Expo Las Vegas 2023 the “most comprehensive packaging and processing event in North America this year,” highlighted sustainability, noting the Sept. Motor and motion controls, standards, contextualization technologies and easier programming are helping in packaging implementations.

Robotics 52

Robotics Robotics Beverage Consumer Goods 52

MEM

APRIL 12, 2023

With consumer expectations, investor demands, and global events, accelerating the rate of change, LRQA is calling on the industry to focus on ‘how’ rather than ‘what’ they do to meet evolving goals.

Supply Chain 52

Supply Chain Beverage Consumer Goods Manufacturing 52

i4.0 today

MARCH 31, 2023

From 4th-10th May, visitors will be able to learn how the company’s motto ‘Automating the World’ can be applied to drive the productivity and competitiveness of the consumer packaged goods (CPGs) sector.

Robotics 52

Robotics Robotics Automation Consumer Goods 52

Additive Manufacturing

MAY 1, 2023

The Gravity is CE-certified for use in offices, hospitals, and research laboratories to manufacture production parts for a breadth of applications including automotive, consumer goods, and medical devices and equipment. The forward-looking statements included are made only as of the date of the statement.

3D printing 52

3D printing Additive manufacturing Consumer Goods Automotive 52

Frost & Sullivan Manufacturing

JULY 22, 2024

By Stephen Thomas , Sr Director Network Services, Frost & Sullivan Information and Communications Technology (ICT) The Orange Business Insights 2024 event held in Amsterdam on July 10 and 11 showcased strategic investments and technological advancements in digital infrastructure.

Supply Chain 52

Supply Chain Consumer Goods Industry 4.0 Industry 4.0 52

Dinesh Mishra

DECEMBER 13, 2023

Disruptive events have surged in recent years, from geopolitical shifts and extreme weather to technology breakthroughs and material and talent shortages. On average, companies in India are investing $70 million in 2023 to digitize, automate, and relocate supply and production facilities, which is expected to increase to at least $2.3

Supply Chain 52

Supply Chain Assembly Line Consumer Goods Automotive 52

Plastics News

NOVEMBER 21, 2022

While the medical space is the biggest driver for Elmet's LSR processing systems, the company also works in automotive, health care, consumer goods and bake ware. When you are getting out of the car (during a "thermal event"), seconds could mean lives. It is similar to the airline industry," Pelletier said.

Automation 52

Automation Beverage Consumer Goods Benchmarking 52

Fastener News Desk

MAY 11, 2023

These are historically remarkable events that can’t be anticipated and lead to trillions of dollars in losses. These are serious and costly events but are on a smaller scale than catastrophes. Henkel, a consumer goods company based in Germany, provides one example of how a sustainability focus can flow through a supply chain.

Supply Chain 52

Supply Chain Value chain Industry 4.0 Industry 4.0 52

Additive Manufacturing

MAY 19, 2023

In addition to the 350+ exhibitors, there was also a Main Stage with a high-calibre speakers rotating through the stage all day, and the Tech Hub for events such as the all-new Pitch Fest, which was standing room only every time I walked past it.

3D printing 52

3D printing Additive manufacturing Consumer Goods Supply Chain 52

Frost & Sullivan Manufacturing

JULY 22, 2024

By Stephen Thomas , Sr Director Network Services, Frost & Sullivan Information and Communications Technology (ICT) The Orange Business Insights 2024 event held in Amsterdam on July 10 and 11 showcased strategic investments and technological advancements in digital infrastructure.

Supply Chain 40

Supply Chain Consumer Goods Industry 4.0 Industry 4.0 40

i4.0 today

OCTOBER 6, 2023

where insulation is required, as well as in medical and healthcare products and the consumer goods sector. LSR is regarded as a unique material, in that it remains flexible and elastic down to -50°C, yet also retains its properties up to 200°C. As a result, LSR is used extensively in electronic components, cables etc.

Cycle time 52

Cycle time Automotive Industry 4.0 Industry 4.0 52

i4.0 today

SEPTEMBER 19, 2023

Including packaging, medical, automotive, electronics and consumer goods. At Fakuma 2023, Sumitomo (SHI) Demag demonstrates that its all-electric IntElect platform is an excellent option for manufacturers producing components in every market segment.

Cycle time 52

Cycle time Robotics Robotics Automation 52

Fabricating & Metal Work

JUNE 26, 2024

This two-day by invitation only educational event was held on June 5 and 6. These systems stamp products for the automotive, appliance, electronics, electrical, and consumer goods sectors. Canada, and Mexico for the 2024 Servo Symposium. servo press design, development, and applications, as well as cost justifications.

Consumer Goods 52

Consumer Goods Industry 4.0 Industry 4.0 Electronics 52

Mold Making Technology

NOVEMBER 19, 2024

The company says EcoOne is a economical solution suitable for processing commodity resins for simple, cost-sensitive applications such as consumer goods, small home appliances, basic automotive components, electronic peripherals/accessories and more.

Consumer Goods 52

Consumer Goods Cycle time Beverage Fit 52

Fabricating & Metal Work

JULY 23, 2023

The automotive, appliance, hardware, consumer goods industries, and all industries that depend upon consistent high-volume production, will benefit from the applications of this press system. This newly designed two point, 110-metric ton, unitized frame press is capable of speeds ranging from 120-to-300 strokes per minute (SPM).

Form 52

Form Automation Robotics Robotics 52

Dinesh Mishra

JANUARY 30, 2023

In this issue, we feature actionable insights from industry leaders on top growth opportunities and their offerings for this year’s biggest industry event The global Metal Cutting Machine Tools (MCMT) market size was valued at USD 76 billion in 2022, projected to grow at a CAGR of 4.8 Stand details: Hall 3A, Stand no. technology.

Industry 4.0 52

Industry 4.0 Industry 4.0 Aerospace Automotive 52

Foley

JULY 11, 2023

Such an event could severely disrupt daily operations across multiple sectors and hinder emergency response efforts. These clauses and audits protect manufacturers legally and incentivize third parties to uphold high cybersecurity standards and limit liability in the event of a cybersecurity attack. Healthcare and Pharmaceuticals.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40