Metrology

JANUARY 28, 2024

to deploy general purpose robots in automotive manufacturing environments. The post BMW Manufacturing To Bring Humanoid Robots Into Automotive Production appeared first on Metrology and Quality News - Online Magazine.

Automotive 52

Automotive Robotics Robotics Manufacturing 52

Metrology

DECEMBER 13, 2023

Zebra Technologies has revealed that 56% of automotive business leaders surveyed in the UK are currently using some form of artificial intelligence (AI) such as deep learning in their machine vision projects. For Germany, that figure stands at 43%.

Benchmarking 59

Benchmarking Automotive Artificial Intelligence Form 59

i4.0 today

APRIL 25, 2024

Rohde & Schwarz has teamed up with IPG Automotive, a pioneer in virtual test driving, to redefine automotive radar Hardware-in-the-Loop (HIL) integration testing and thereby reducing the cost by bringing Autonomous Driving (AD) testing from the proving ground to the development lab. Today Magazine. Today Magazine.

Automotive 52

Automotive Function Prototype  Compliance 52

Metrology

JUNE 24, 2024

Rockwell Automation, the world's largest company dedicated to industrial automation and digital transformation, has announced the results of the 9th annual "State of Smart Manufacturing Report: Automotive Edition."

Smart manufacturing 52

Smart manufacturing Automotive Automation Manufacturing 52

Metrology

AUGUST 18, 2024

Engineers at Coherix have developed an industry first technology to monitor and adjust the application of adhesives and sealants used to manufacture essential automotive, medical and consumer-electronics products.

Electronics 103

Electronics Automotive Manufacturing 103

i4.0 today

DECEMBER 10, 2024

The TRAVEO T2G Automotive Microcontroller family for Body and Cluster from Infineon Technologies AG (FSE: IFX / OTCQX: IFNNY) features a Hardware Security Module (HSM) that is capable of executing secured boot and ensuring secured isolation of HSM applications and data. Today Magazine.

Compliance 52

Compliance Automotive Supply Chain 52

Metrology

DECEMBER 17, 2023

The post ZEISS Cooperation To Develop New Sustainable Technologies For Remanufacturing Automotive Parts appeared first on Metrology and Quality News - Online Magazine.

Automotive 59

Automotive 59

Metrology

JANUARY 14, 2024

In the automotive industry, where precision and perfection are not just goals but necessities, ensuring the highest quality in exterior parts is paramount. The post Automotive Exterior Inspection and Paint Defects Detection Using Advanced Sensors and Computer Vision appeared first on Metrology and Quality News - Online Magazine.

Automotive 52

Automotive 52

Metrology

JUNE 10, 2024

The post Automotive EV Smart Factory Focussed on Automated Quality Control appeared first on Metrology and Quality News - Online Magazine. Xiaomi's entry into the crowded China EV market is set to further disrupt the world's largest auto market.

Automotive 52

Automotive Automation Manufacturing Smart manufacturing 52

i4.0 today

DECEMBER 4, 2024

Monolith, artificial intelligence (AI) software provider to the world’s most innovative engineering teams, has been selected by Europe’s leading automotive engineering consultancy HORIBA MIRA as its AI partner for data-driven battery and powertrain development and testing. Today Magazine. To learn more, visit www.monolithai.com.

Prototype  105

Prototype  Artificial Intelligence Automotive Function 105

Metrology

AUGUST 4, 2024

A technological and cultural shift is occurring in the automotive manufacturing environment caused by the advent of robotics and machine vision, coupled with the development of AI vision systems.

Automotive 52

Automotive Robotics Robotics Manufacturing 52

Metrology

NOVEMBER 3, 2024

The post Keeping Up With Pace of Change In Automotive Quality Control appeared first on Metrology and Quality News - Online Magazine. This often requires the measured part to be repositioned, leading to longer cycle times and increased operational costs.

Automotive 52

Automotive Cycle time Manufacturing 52

Metrology

FEBRUARY 19, 2023

Bentley Motors has taken the next step on its journey to become the world’s most sustainable luxury automotive manufacturer with a ground-breaking ceremony for its new Launch Quality Centre and The post Bentley Breaks Ground on New Launch Quality Centre appeared first on Metrology and Quality News - Online Magazine.

Automotive 105

Automotive Manufacturing 105

Metrology

MARCH 19, 2023

Automakers are under more pressure than ever as the automotive and transportation industries continue to transform at a rapid pace. Technology advancements, such as automated driving systems, 5G connectivity, and The post Smart Manufacturing Key To Tomorrow’s Advanced Vehicles appeared first on Metrology and Quality News - Online Magazine.

Smart manufacturing 105

Smart manufacturing Manufacturing Automotive Automation 105

Metrology

DECEMBER 16, 2022

a pioneer of green manufacturing technologies with the first modular digital factory for the automotive industry. The post Hexagon Invests In Autonomous and Sustainable Manufacturing Through Divergent appeared first on Metrology and Quality News - Online Magazine. Divergent has.

Manufacturing 105

Manufacturing Automotive Additive manufacturing Smart manufacturing 105

i4.0 today

JUNE 12, 2024

In recent years, automotive manufacturers, looking towards a global model, have introduced numerous processes into their supply chain, such as signing contracts, which used to be done through car dealerships. The BMW Group is a world-leading automotive brand that we work with in Europe. Today Magazine.

Automotive 52

Automotive Electronics Supply Chain Manufacturing 52

Metrology

MAY 11, 2023

Angus Taylor has worked in product design and manufacturing across several industries relevant to GelSight, including the aerospace, automotive, and medical sectors.

Aerospace 104

Aerospace Manufacturing Automotive 104

Metrology

APRIL 15, 2024

It requires rigorous inspection, primarily due to the high quality and stringent safety standards required in the automotive industry. The post Insights Into The Inspection Challenges Arising During Sheet Metal Manufacturing appeared first on Metrology and Quality News - Online Magazine.

Manufacturing 98

Manufacturing Automotive 98

i4.0 today

MARCH 4, 2024

Smart Eye, the leading developer of DMS software for the automotive industry, today announced a breakthrough order from a major Korean car manufacturer. The combination of driver monitoring and cabin monitoring software, known as automotive interior sensing, is the next step in the evolution of in-cabin sensing technologies.

Automotive 52

Automotive Sourcing Manufacturing Industry 4.0 52

Metrology

JANUARY 2, 2023

+Vantage Corporation was established in 2003 to provide measurement and inspection capabilities to the automotive industry. The post Integrated Smart 3D Scanning Drives 100% Inline EV Battery Inspection appeared first on Metrology and Quality News - Online Magazine.

Automotive 98

Automotive Automation Manufacturing 98

i4.0 today

JULY 17, 2024

Stackpole’s RNCV series provides an automotive grade, high precision, high stability chip resistor with VCR less than +/- 1.5 The post RNCV Automotive Grade High Voltage Thin Film Chip Resistors Offer Low VCR appeared first on i4.0 Today Magazine. ppm per volt. and TCR as low as 25 ppm.

Automotive 52

Automotive Electronics Manufacturing Industry 4.0 52

i4.0 today

SEPTEMBER 18, 2024

We also want to strengthen REE’s integration into the automotive ecosystem by delivering unparalleled customer support across the value chain. About REE Automotive REE Automotive Ltd. Today Magazine. REE was represented on the transactions by Sullivan & Worcester LLP with respect to matters relating to U.S.

Automotive 52

Automotive Manufacturing Supply Chain Cargo 52

i4.0 today

JULY 26, 2024

It is a never-ending quest for automotive manufacturers to reduce the weight of the vehicle. The automotive market is growing at a compound annual rate of over 7%. Electronics now has its solutions to fully support and change the paradigms of electronics integration within the boundaries of automotive lightweighting.

Electronics 52

Electronics Automotive Function Form 52

i4.0 today

SEPTEMBER 12, 2024

This latest configuration enables Zeus to perform magnetic MEMS testing, a critical process in automotive manufacturing in which magnetic field sensing is used for applications such as proximity sensors in vehicles. Today Magazine. Follow-on orders are expected after the initial deployment. “We

Automotive 52

Automotive Manufacturing Electronics Automation 52

i4.0 today

APRIL 23, 2024

The AVP incorporates the latest Qualcomm QCS8550, the most advanced mobile processor chip from the leader in mobile, automotive, and robotics system-on-chip (SoC) technology. Today Magazine. To see the new AVP at SPIE Defense + Commercial Sensing Exhibition , visit Teledyne booth #702, April 23 through April 25, 2024.

Artificial Intelligence 104

Artificial Intelligence Automotive Fit Robotics 104

i4.0 today

MAY 9, 2024

The new study surveyed 165 senior decision-makers in automotive engineering in North America and major European automotive markets, exploring their views on the application of EngAI in the development of EV batteries.

Automotive 52

Automotive Compliance Artificial Intelligence Prototype  52

i4.0 today

DECEMBER 15, 2023

Automotive IQ is thrilled to bring you the world’s first, Generative AI For Automotive 2024 Conference , coming to Frankfurt, Germany on 21 st & 22 nd February 2024. Building lasting business connections, exchanging ideas, and sharing the latest Generative AI applications with the automotive community. Today Magazine.

Automotive 52

Automotive Automation Manufacturing Industry 4.0 52

Metrology

AUGUST 13, 2024

If you're working on an automotive project, find firms with expertise in industrial design. The post Revolutionizing Product Design: How 3D Scanning Enhances Precision and Innovation appeared first on Metrology and Quality News - Online Magazine.

Prototype  82

Prototype  Electronics Automotive 82

Dinesh Mishra

JANUARY 17, 2023

India is among the world’s biggest metal-cutting machine tools markets, with sectors like automotive, general engineering, energy and aerospace being the major demand drivers. Do Read the complete magazine – DMI Jan-Feb 2023 – Metal Cutting Machine Tool special.

Manufacturing 111

Manufacturing Aerospace Automotive Form 111

i4.0 today

APRIL 22, 2024

This is where platform development, a very well-known strategy in automotive, helps us be competitive,” said Cédric Plasse, CTO, Emotors. “We Today Magazine. We design many things digitally but cannot do everything with just our digital models.

Automotive 52

Automotive Benchmarking Prototype  Form 52

E&T

MARCH 9, 2023

New global research commissioned by ABB Robotics and Automotive Manufacturing Solutions, revealed that 59 per cent of respondents believe the shift to pure EV production is not achievable within current legislative timelines. Magazine What Car?

Supply Chain 98

Supply Chain Automotive Robotics Robotics 98

i4.0 today

AUGUST 27, 2024

Murata Manufacturing (hereinafter “Murata”) participated in the Automotive Engineering Exposition (Yokohama), Japan’s largest automobile technology exhibition, on May 22, 2024. We unveiled a CO2 adsorption filter at this year’s Automotive Engineering Exposition. Today Magazine.

Automotive 52

Automotive Electronics Manufacturing Form 52

i4.0 today

NOVEMBER 11, 2024

Delta, a global leader in power and thermal management and a provider of IoT-based smart green solutions, will highlight energy-efficient solutions for AI and cloud data centre, automotive, and industrial sectors at Electronica 2024. Today Magazine.

Automotive 52

Automotive Industry 4.0 Industry 4.0 Electronics 52

i4.0 today

OCTOBER 18, 2024

The post SEDEMAC Adopts Siemens Xcelerator to Accelerate Development of Motor Control Units for Automotive Industry appeared first on i4.0 Today Magazine. From chips to entire systems, from product to process, across all industries, Siemens Digital Industries Software – Accelerating transformation.

Automotive 52

Automotive Bill of Materials Manufacturing Industry 4.0 52

i4.0 today

JANUARY 31, 2024

Offering exclusive and specialized services for the light-weight solutions in the automobile industry Among the benefits of the new facility, a Schuler cutting line stands out, which allows the cutting of raw pieces of aluminum and high-strength steel that are used in the automotive industry. Today Magazine.

Automotive 52

Automotive Supply Chain Industry 4.0 Industry 4.0 52

Manufacturer's Monthly

MAY 1, 2024

Our extensive readership spans the full spectrum of the manufacturing sector, from automotive to aerospace and every niche in between, including chemical, energy equipment, and construction materials manufacturers.

Lean manufacturing 98

Lean manufacturing Manufacturing Compliance Aerospace 98

Dinesh Mishra

DECEMBER 3, 2024

Thanks to the intelligent arrangement of the tool magazine, the machine width has been reduced from 2,450 mm to a compact 2,000 mm without compromising performance. Thanks to the double disk-type tool magazine, it is possible to work with tool lengths of up to 550 mm, which significantly increases flexibility in production.

Aerospace 59

Aerospace Automotive Manufacturing 59