MEM

SEPTEMBER 20, 2023

Advanced Engineering Show announcement: New Aerospace Standard Composites Factory Operational in Morocco Rockwood Composites, the ‘out-of-autoclave’ composite components manufacturer, today (1 November 2023) announced that its 21,000ft 2 factory in Morocco is now operational.

Composites 52

Composites Aerospace Automotive Manufacturing 52

Additive Manufacturing

JANUARY 11, 2023

Additive manufacturing hardware solution providers were once again busy in 2022. Highlights included more options for printing bigger and smaller, printing electronics and composites, and a couple of open platforms to allow more material development for industry and researchers.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Composites 98

Manufacturer's Monthly

AUGUST 9, 2023

Markforged has been at the forefront of additive manufacturing for the past 10 years, helping manufacturers revolutionise the industrial production landscape by bringing 3D printing right to the factory floor. This advancement opened new possibilities for manufacturing stronger and more resilient parts.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98

MEM

NOVEMBER 29, 2022

A specialist manufacturing company, Atlas Composite Technologies, has received a seven-figure investment boost to fuel its growth plans. Atlas designs and manufactures complex composites for use in a range of sectors, including aerospace, defence, medical, elite motorsport and niche automotive such as supercars and hypercars.

Composites 52

Composites Aerospace Automotive Manufacturing 52

Manufacturer's Monthly

OCTOBER 25, 2022

Australian manufacturers will gain access to a ground-breaking new composite 3D printer at Swinburne University of Technology, for the first time from global market leader Markforged. The Markforged FX20 printer is primarily designed for high-strength end-use parts in the aerospace, defence, automotive and energy industries.

Composites 98

Composites Supply Chain Aerospace Automotive 98

MEM

MAY 4, 2023

Cannon Group comprises over 30 companies and is recognized as a world leader in technologies, processing, and molds for polyurethanes (PU), epoxy, and urethane elastomers for the plastics and composites industries. Automotive OEMs need to reduce the total weight of vehicles while maintaining high levels of safety, performance, and aesthetics.

Automotive 52

Automotive Composites Electronics Cycle time 52

Canadian Manufacturing

AUGUST 2, 2022

Global Automotive Plastics Market Boosted by the Need to Minimize CO2 Emissions. The stringent regulations for OEMs to meet sustainability targets will drive the automotive plastics sector. The stringent regulations for OEMs to meet sustainability targets will drive the automotive plastics sector. billion by 2028 from $31.29

Automotive 52

Automotive Composites Manufacturing 52

Robotics Business Review

AUGUST 12, 2024

The nonprofit ARM Institute said it intends to be an honest broker between robotics and manufacturing stakeholders. Source: ARM Institute The Advanced Robotics for Manufacturing, or ARM, Institute today selected six new technology projects for funding. Chuck Brandt, chief technology officer of the ARM Institute. competitiveness.

Apparel 119

Apparel Robotics Robotics Aerospace 119

Frost & Sullivan Manufacturing

AUGUST 1, 2022

The stringent regulations for OEMs to meet sustainability targets will drive the automotive plastics sector. Frost & Sullivan’s recent analysis, Global Automotive Plastics Growth Opportunities, finds that original equipment manufacturers (OEMs) need for lightweight materials expedites the automotive plastics industry.

Automotive 52

Automotive Composites Manufacturing 52

AU Manufacturing

JULY 5, 2023

The new ilLAuNCH Trailblazer research hub at the UniSQ’s Toowoomba campus features critical infrastructure in space research, such as a long-duration hypersonic tunnel, the Mt Kent astronomical observatory, advanced automated composites manufacturing facilities, and a rocket solid fuel manufacturing lab.

Manufacturing 79

Manufacturing Composites Automation Automotive 79

AU Manufacturing

FEBRUARY 13, 2023

Researchers at Sandia Labs, Ames National Laboratory, and Iowa State University say they have created a 3D-printable high-performance superalloy with an unusual composition that makes it stronger and lighter than state-of-the-art materials currently used in gas turbine machinery.

Additive manufacturing 78

Additive manufacturing 3D printing Manufacturing Aerospace 78

E&T

OCTOBER 13, 2022

This paradox was not lost on the sector; for some time, manufacturers had been working to find solutions to a problem it knew was set to escalate. The organisation, backed by its members, including turbine manufacturers Siemens Gamesa and Vestas, is calling for a landfill ban on wind turbine components by 2025. Image credit: Zebra.

Composites 104

Composites Value chain Prototype  Manufacturing 104

Mold Making Technology

JANUARY 26, 2023

A recent development project evaluated the feasibility of using wire-arc additive manufacturing (WAAM) to produce layup tooling for complex contoured winglets mounted at the tips of the wings of MQ-9B SkyGuardian and SeaGuardian (shown above) remotely piloted aircraft from General Atomics Aeronautical Systems Inc.

Composites 52

Composites 3D printing Cycle time Lead Time 52

Fabricating & Metal Work

JULY 28, 2022

This combination of high thermal stability and rigidity meets industry-specific requirements in tool and die making, aerospace and automotive industries. The high thermal stability and rigidity meet industry-specific requirements in model, tool and die making as well as in the aerospace and automotive industries.

Aerospace 98

Aerospace Composites Automotive Manufacturing 98

Manufacturer's Monthly

NOVEMBER 29, 2022

The expression “supply chain issues” is familiar to all Australians, from the manufacturer whose production line has stalled awaiting parts from an overseas supplier to the housewife walking past empty shelves in her local supermarket. The benefits of thinking outside the traditional manufacturing box can be seen all around the world.

Manufacturing 98

Manufacturing 3D printing Supply Chain Prototype  98

AU Manufacturing

FEBRUARY 1, 2023

American additive manufacturing company Markforged said it is cooperating with the Australian industry to advance the capabilities of additive manufacturing by granting public access to its composite 3D printer.

3D printing 79

3D printing Composites Aerospace Additive manufacturing 79

AU Manufacturing

OCTOBER 25, 2022

In a media release, Swinburne University said the FX20 printer is designed for high-strength end-use parts in the aerospace, defence, automotive, and energy industries. . The 3D printer is capable of printing nearly five times larger builds, with speeds eight times faster than Markforged ’s existing line of composite printers. .

Aerospace 77

Aerospace Supply Chain Composites Automotive 77

Manufacturer's Monthly

NOVEMBER 30, 2022

Projects will deliver significant outcomes in fields such as advanced manufacturing, cybersecurity, environmental change, health, and water.”. Among the successful Discovery Projects to commence in 2023 are: University of Southern Queensland ($399,000) – Carbon fibre thermoplastics as next-generation carbon fibre composites.

Composites 94

Composites Artificial Intelligence Advanced manufacturing Aerospace 94

Fabricating & Metal Work

MARCH 29, 2023

Threading is often the last operation in a component, and the last thing manufacturers want is for the tap to break. With the new straight flute tap and forming tap, manufacturers can increase productivity and reduce cost per part.

Form 98

Form Bottleneck Composites Automotive 98

Frost & Sullivan Manufacturing

NOVEMBER 11, 2024

As the automotive industry pivots towards electric and hybrid vehicles , it is the steady supply of essential materials such as automotive adhesives and sealants , and vehicle coatings , that helps meet unique demands. Read on to learn more.

Automotive 52

Automotive Manufacturing Composites Function 52

E&T

JANUARY 30, 2023

The study was intended to send a message to the automotive industry that sustainable alternatives are feasible. The SMS design study was created by Callum to illustrate that there is another way and we can support manufacturers and suppliers identify engineered alternatives that end-consumers are increasingly looking for.”

Automotive 105

Automotive Composites Prototype  Manufacturing 105

i4.0 today

JULY 30, 2024

IPCO, a leading manufacturers of processing systems for composite materials, will use China Composites 2024 to highlight a number of innovative applications for its double belt presses, scattering systems and film casting lines. Further details on the landing page: www.ipco.com/china-composites. Today Magazine.

Composites 59

Composites Automotive Aerospace Manufacturing 59

Plastics News

JANUARY 19, 2023

to support production for the automotive industry. The 140,000-square-foot addition will include expansive warehousing and space for two-shot molding production for the company, which specializes in composite components, static sealing, acoustics, vibration reduction and structural reinforcements for auto, aerospace and commercial vehicles.

Warehousing 98

Warehousing Composites Prototype  Aerospace 98

Additive Manufacturing

JULY 26, 2022

Department of Energy has approved a technical collaboration between IperionX and Oak Ridge National Laboratory to develop low cost titanium alloys for additive manufacturing utilizing using IperionX’s titanium metal powders. produced titanium powder for additively manufactured aerospace parts, supporting a project with the U.S.

3D printing 98

3D printing Additive manufacturing Aerospace Composites 98

i4.0 today

JANUARY 9, 2024

Critical Manufacturing, a pioneer in future-ready, multi-site manufacturing execution systems (MES) and a subsidiary of ASMPT, has been listed in the Deloitte ‘Technology Fast 50’ , reflecting the innovation and success of its MES solutions. Critical Manufacturing’s success has come from a series of innovations in MES technology.

Manufacturing Execution System (MES) 52

Manufacturing Execution System (MES) Composites Manufacturing Electronics 52

Modern Machine Shop

DECEMBER 1, 2022

A donut-shaped machine tool component called the AKZ FDS adapter illustrates the increasingly intricate links between additive manufacturing (AM) and CNC machining. Learn more about the design and manufacture of this 3D printed machine tool component. This photo and the drawing below courtesy of DMG MORI. It’s not that simple.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Form 98

Frost & Sullivan Manufacturing

OCTOBER 22, 2024

A variety of industries — automotive, healthcare, food and beverages, and beyond — are leveraging innovative eco-friendly manufacturing solutions by harnessing sustainable materials. 30 countries have passed single-use plastic bans, accelerating demand for eco-friendly manufacturing.

Value chain 52

Value chain Manufacturing Supply Chain 3D printing 52

Manufacturer's Monthly

AUGUST 28, 2023

Work supported by our research hub and new fibres facility will bring benefits to a range of industries – such as automotive, mining and fashion – through a wide array of partnership projects,” Martin said. The research focuses on solving real-world problems and discovering ways to reduce waste from the manufacturing process,” Razal said.

Composites 98

Composites Prototype  Automotive Function 98

Fabricating & Metal Work

NOVEMBER 20, 2024

For manufacturing leaders, updating legacy tech to meet today’s business needs of agility and innovation means replacing traditional ERP systems with cloud architected software-as-a-service (SaaS) solutions—more open, modular, and ecosystem-oriented platforms that support modern development techniques and provide AI capabilities.

Composites 64

Composites Fit Form Automotive 64

Manufacturer's Monthly

OCTOBER 19, 2022

Konica Minolta Australia has announced the availability of the large format FX20 3D printer through its partner, Markforged, creator of the integrated metal and carbon fibre additive manufacturing platform, the Digital Forge. The FX20 is the biggest, fastest, and most sophisticated 3D printer Markforged has ever produced.

3D printing 97

3D printing Additive manufacturing Supply Chain Composites 97

Canadian Manufacturing

JUNE 20, 2023

announces that it has commenced with the production of prototype automotive components to be followed by physical impact testing for an electric vehicle manufacturer. MISSISSAUGA — Cymat Technologies Ltd. The next phase physical impact testing is intended to further validate these simulation results. ”

Prototype  40

Prototype  Automotive Composites Manufacturing 40

Dinesh Mishra

AUGUST 17, 2022

The DEK TQ L offers electronics manufacturers new degrees of freedom for printing larger boards with dimensions of up to 600 x 510 millimeters – 90 percent more than the DEK TQ. ASMPT (HKEX stock code: 0522) is a leading global supplier of hardware and software solutions for the manufacture of semiconductors and electronics.

Electronics 98

Electronics Composites Automation Cycle time 98

i4.0 today

MAY 25, 2023

Critical Manufacturing, the provider of innovative, future-ready Manufacturing Execution Systems (MES), announces its partnership with L&T Technology Services Limited (LTTS), a leading Engineering and R&D services company headquartered in India. Director, Head of Manufacturing Service, Danfoss Group IT.

Smart manufacturing 52

Smart manufacturing Manufacturing Execution System (MES) Manufacturing Industry 4.0 52

Manufacturer's Monthly

SEPTEMBER 7, 2022

Mackay Consolidated Industries is a 100 per cent Australian-owned and operated business that began in 1932 as a small privately owned company that specialised in the supply of OEM-approved automotive parts. In Australia, Mackay distributes simple, effective solutions for controlling vibrations through Motion Australia’s businesses.

Benchmarking 95

Benchmarking Composites Lead Time Automotive 95

Manufacturer's Monthly

OCTOBER 12, 2022

Available in plastic and metal with a wide choice of composition and cut-outs, they are ideally suited for industrial, building, and infrastructure applications. Common areas of application include industry machine building (automotive, textile, wood) and services and infrastructure (energy distribution, building, airport).

Function 94

Function Composites Form Automotive 94

Fastener News Desk

SEPTEMBER 5, 2023

1, 2023 /PRNewswire/ — Economic activity in the manufacturing sector contracted in August for the 10th consecutive month following a 28-month period of growth, say the nation’s supply executives in the latest Manufacturing ISM ® Report On Business ®. The report was issued today by Timothy R. Fiore , CPSM, C.P.M.,

Manufacturing 64

Manufacturing Beverage Composites Apparel 64

Fabricating & Metal Work

NOVEMBER 12, 2024

With weight-reduction being a priority for industries such as motorsports and aerospace, many manufacturers have recently turned to the lightweight aluminum-silicon-magnesium based alloys, such as F357 and AlSi10Mg, when 3D printing parts for everything from race cars to rockets. What’s the Attraction?

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52