Additive Manufacturing

JANUARY 11, 2023

Additive manufacturing hardware solution providers were once again busy in 2022. BCN3D Unveils Viscous Lithography Manufacturing (VLM) , a New Resin-based 3D Printing Technology: BCN3D announced a new 3D printing technology to advance alongside its FFF solutions: Viscous Lithography Manufacturing (VLM).

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Composites 98

Additive Manufacturing

NOVEMBER 10, 2022

/November 10, 2022 — 6K Additive and Fraunhofer Institute for Laser Technology ILT announced a collaboration to create a complete life cycle assessment (LCA) for additive manufacturing. “There are conflicting views on additive manufacturing regarding its environmental impact compared to traditional manufacturing. .

Additive manufacturing 98

Additive manufacturing Manufacturing Sourcing 98

Additive Manufacturing

NOVEMBER 9, 2022

For the additive manufacturing industry, the largest event of the calendar year is nearly upon us as Formnext 2022 is ready to kick off November 15-18 in Frankfurt, Germany. Gartner’s Hype Cycle has made us all students of overblown trends and what they mean en route to new manufacturing realities. That’s not up to code.

Additive manufacturing 105

Additive manufacturing Manufacturing 3D printing Made-to-spec 105

Additive Manufacturing

DECEMBER 7, 2022

Within additive manufacturing, there is a big focus on part and application qualification. related to the Additive Manufacturing Policy. is to leverage additive manufacturing to reduce maintenance cycle times, curb supply chain backlogs, and place manufacturing capabilities at or near the point of need.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98

Modern Machine Shop

JULY 23, 2024

At its production plant in Iga, Japan, machine tool maker DMG MORI has now replaced a drawbar plating operation with directed energy deposition (DED) on one of the company’s own Lasertec 3000 DED hybrid additive manufacturing and turning/milling machines. But the drawbar is different from most or all the other additive parts.

Lead Time 96

Lead Time Additive manufacturing Manufacturing 3D printing 96

Additive Manufacturing

OCTOBER 24, 2022

The medical device market has historically been one of the pioneer industries using additive manufacturing (AM) for production. In fact, according to FDA’s analysis of medical device clearances, additive manufacturing has been used in medical device production as early as 2008 (Ricles, L & Oh, S. RAPID, May 2014).

Additive manufacturing 74

Additive manufacturing Manufacturing Quality Management System Sourcing 74

Fabricating & Metal Work

SEPTEMBER 30, 2024

Primary applications for Laser Mechanisms’ new FiberWELD DHµ include additive manufacturing, cladding and HLAW. Lake Mary, FL) enables manufacturing quality specialists, production managers, engineers, product designers and more to benefit from a variety of 3D laser scanning, contact and non-contact measurement solutions.

Additive manufacturing 52

Additive manufacturing Manufacturing Sourcing Aerospace 52

Robotics Business Review

JULY 6, 2024

Source: Replique In the realm of modern manufacturing and automation, the integration of robotics continues to redefine industry standards. Henrike Wonneberger, co-founder and chief operating officer at Replique, explores the relationship between additive manufacturing and robotics.

3D printing 126

3D printing Robotics Robotics Automation 126

AU Manufacturing

JUNE 8, 2023

Hennessey also said that Alio streamlines procurement, ensures compatibility, and facilitates technical assistance by offering a single source for positioning components, eventually improving operational effectiveness and dependability for AM system developers and operators.

Additive manufacturing 67

Additive manufacturing Prototype  Manufacturing Sourcing 67

i4.0 today

FEBRUARY 8, 2024

The company landscape in additive manufacturing has also transformed, with prior players merging or exiting and new players consistently emerging. There will be additional consideration of the energy sources used to power energy-intensive printing technologies.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Composites 52

AU Manufacturing

MAY 23, 2023

Thus, the defence industry must use all of its resources to advance military innovation, and metal additive manufacturing (AM) offers a special chance to do so. The use of modern metal AM can address sustainability issues by giving a reliable source of parts to increase the lifespan of current assets.

Additive manufacturing 59

Additive manufacturing 3D printing Supply Chain Manufacturing 59

Manufacturer's Monthly

JANUARY 30, 2024

In an analysis conducted by Additive Manufacturing Research, the market study titled “Additive Manufacturing in the Energy Sector: Market Analysis & Forecast“ reveals significant opportunities and potential for 3D printing in the Energy sector, and compelling insights into the transformative role of AM within it.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Compliance 52

i4.0 today

SEPTEMBER 27, 2024

Cooksongold has launched a new industrial division to pioneer the use of precious metal additive manufacturing (AM) for a range of performance-critical applications. Part of HM Precious Metals, Cookson Industrial , will provide an end-to-end service comprising of consultancy, R&D, NPD and production.

Additive manufacturing 52

Additive manufacturing Manufacturing Aerospace Supply Chain 52

Fastener News Desk

JULY 3, 2024

This holistic collaboration marks a significant shift from conventional 3D printing partnerships, redefining standard additive manufacturing relationships among OEMs, VARs, product innovators, industrial application engineers, and 3D printing end-users.

Additive manufacturing 52

Additive manufacturing 3D printing Supply Chain Manufacturing 52

Fastener News Desk

NOVEMBER 19, 2023

This has taken the form of long lead times, as well as stalling of production when parts needed for manufacturing fail. There is a potential solution, however: additive manufacturing. This opens new doors for faster and more localized manufacture of parts in these and other industries. Industry 4.0

Supply Chain 52

Supply Chain Additive manufacturing 3D printing Manufacturing 52

MESA

MAY 26, 2023

YOUNGSTOWN, OH — The National Center for Defense Manufacturing and Machining (NCDMM) and America Makes have announced a new directed project call funded by the Office of the Under Secretary of Defense, Research and Engineering Manufacturing Technology Office (OSD (R&E)), and the Air Force Research Laboratory (AFRL) worth a total of $11.7M.

3D printing 130

3D printing Supply Chain Composites Additive manufacturing 130

Additive Manufacturing

NOVEMBER 10, 2022

In recent years additive manufacturing (AM) technologies and materials have evolved into being able to achieve industrial-grade parts production, which means AM parts are now entering the supply chain. Angeline Goh, additive manufacturing technology lead for Shell agrees. “We Inventory for these OEMs is also a concern.

Supply Chain 52

Supply Chain Additive manufacturing Manufacturing Quality Management System 52

Additive Manufacturing

FEBRUARY 24, 2023

But this was no vacation; rather, it was an intensive seven day examination into whether industrial additive manufacturing can have a role on Guam. Manufacturing on the island is minimal, with a few machine, welding and metal bending shops, but otherwise mostly limited to food production.

Additive manufacturing 59

Additive manufacturing 3D printing Supply Chain Manufacturing 59

NCMS

AUGUST 22, 2022

The post Project Announcement: Qualification and Certification of Metal Additive Manufacturing to Replace Hard to Source Repair Parts appeared first on National Center for Manufacturing Sciences.

Additive manufacturing 40

Additive manufacturing Sourcing Manufacturing 40

Additive Manufacturing

SEPTEMBER 12, 2022

A wide-use temperature range, inert processing atmosphere, and an open-source platform allows for printing of many materials including PA 12, PA 11, Polypropylene, PBT, as well as aluminum, glass, and fiber-filled plastics. PA 12 is commercially available at launch, with PA 11, Filled PA 12, and PBT available in Q4 2022.

Additive manufacturing 52

Additive manufacturing Manufacturing 3D printing Bottleneck 52

Additive Manufacturing

NOVEMBER 18, 2022

Ottawa, Ontario/November 17, 2022 — Aiming to improve the performance and productivity of metal additive manufacturing, Morf3D Inc. Headquartered in California, Morf3D specializes in the optimization of technology solutions for high volume additive manufacturing (AM), serving the space, aviation and defense markets.

3D printing 98

3D printing Additive manufacturing Aerospace Automotive 98

Additive Manufacturing

NOVEMBER 9, 2022

9, 2022 — Chromatic 3D Materials has launched ChromaScan, an additive manufacturing software for printing resin on non-planar surfaces. This new technology allows manufacturers to 3D print durable, flexible materials directly onto substrates of any shape including metal, plastic and textiles. MINNEAPOLIS, Nov.

3D printing 105

3D printing Apparel Additive manufacturing Function 105

Manufacturer's Monthly

NOVEMBER 29, 2022

The expression “supply chain issues” is familiar to all Australians, from the manufacturer whose production line has stalled awaiting parts from an overseas supplier to the housewife walking past empty shelves in her local supermarket. The benefits of thinking outside the traditional manufacturing box can be seen all around the world.

Manufacturing 98

Manufacturing 3D printing Supply Chain Prototype  98

21st Century Tech

FEBRUARY 19, 2023

At the Massachusetts Institute of Technology (MIT) there is a new course offering entitled, AI for Computational Design and Manufacturing. The course runs for five days and according to the syllabus includes the following: Learning how AI can be used in a manufacturing workflow for process optimization and control.

3D printing 103

3D printing Manufacturing Artificial Intelligence Assembly Line 103

Manufacturer's Monthly

JULY 25, 2022

The Modern Manufacturing Expo, which takes place at the Sydney Showground in September, has added two one-day conferences to their education program: the Smart Manufacturing Conference and the Green & Sustainable Manufacturing Summit. Smart Manufacturing Conference . Smart-sourcing new technologies and equipment; .

Manufacturing 98

Manufacturing Smart manufacturing 3D printing Robotics 98

Fabricating & Metal Work

MARCH 25, 2024

“Using advanced pulsed-GMAW equipment, EWI can work with end users to develop custom waveforms for the arc DED and the alloys associated with additive manufacturing,” says Michael Carney, Senior Engineer at EWI. It is faster than other methods of additive manufacturing, extremely accurate, and can fabricate large-scale parts.

Additive manufacturing 40

Additive manufacturing Manufacturing Sourcing Rapid prototyping 40

Modern Machine Shop

JULY 21, 2024

Autodesk Fusion receives multiple updates that impact three- and five-axis machining Source: Autodesk Inc. is showcasing its complete portfolio of design and make products, including the release of Autodesk Fusion, a cloud-enabled software for designers and manufacturers. Autodesk Inc.

Cycle time 115

Cycle time Additive manufacturing Sourcing Manufacturing 115

AU Manufacturing

DECEMBER 27, 2022

The Australian manufacturing industry has seen dynamic trends in 2022 as it still recovers from the consequences of the COVID-19 pandemic. For many decades, manufacturers have been working to create the right operational model that would dramatically boost production, improve product quality, and reduce hiccups in operation. .

Supply Chain 80

Supply Chain Manufacturing Additive manufacturing Bottleneck 80

Additive Manufacturing

JULY 28, 2022

Combining cutting-edge technology with additive manufacturing redefines the limits set within traditional manufacturing and delivers innovation in places you might not expect. Additive manufacturing (AM), more commonly known as 3D printing, is an innovative process where objects are created one layer at a time.

3D printing 98

3D printing Additive manufacturing Cycle time Supply Chain 98

Manufacturer's Monthly

APRIL 11, 2023

Like many other developed countries, Australia has been forced to make a necessary transformation in its traditional segments primarily due to increased global competition and outsourcing to lower-cost countries, which has forced a shift towards higher-value manufacturing activities that require more sophisticated skills and technology.

Manufacturing 98

Manufacturing Function Form Supply Chain 98

Mold Making Technology

DECEMBER 1, 2024

Source | Thinkstock Talent isn't just important — it's the cornerstone of national competitiveness. Source | U.S. Bureau of Labor Statistics “Back in 2011, we were already talking about a skills gap, with 600,000 job openings in manufacturing. Source | U.S. manufacturing sector could need up to 3.8

Manufacturing 52

Manufacturing Sourcing Supply Chain Additive manufacturing 52

Additive Manufacturing

SEPTEMBER 28, 2022

“Solving climate change, whether through adopting electric vehicles or reducing emissions from manufacturing sites, requires clean, efficient and dependable electricity. The heat is produced by reacting fuels through flameless oxidation or other heat sources including renewables.

Additive manufacturing 92

Additive manufacturing Sourcing Manufacturing 92

Mold Making Technology

MAY 22, 2024

Source | Getty Images As we mark the halfway point of 2024, it’s a good time to take a moment to step back and assess where everything is, and whether any improvements can be made. PET Injection Molder Introduces rPET Capabilities Source | Husky Technologies Husky Technologies has launched the HyPET6e molding platform.

3D printing 98

3D printing Sourcing Form Lead Time 98

CMTC Manufacturing Tech

OCTOBER 11, 2024

The smooth flow of goods is essential to a thriving manufacturing base, but aging roads, congested highways, and outdated rail and port systems can become obstacles. Modernizing these facilities means embracing automation and flexible manufacturing strategies.

Supply Chain 96

Supply Chain Warehousing Logistics Manufacturing 96

Manufacturer's Monthly

NOVEMBER 21, 2022

Supply chain disruptions continue to plague global economies, especially within the manufacturing industry. In Australia, manufacturers with offshore operations are experiencing significant supply chain issues that threaten productivity and financial stability. Tackling supply chain uncertainty with 3D printing. reduced costs.

3D printing 115

3D printing Supply Chain Computer-Aided Design (CAD) Bottleneck 115

AU Manufacturing

FEBRUARY 7, 2023

A research team from the University of Dakota has received federal funding of nearly $250,000 (AUD$359,000) to research new manufacturing methods for components used in nuclear reactors. Upon completion, those components will be thoroughly examined to compare their functionality versus traditionally manufactured components.

3D printing 77

3D printing Additive manufacturing Function Advanced manufacturing 77

Mold Making Technology

MARCH 5, 2024

Source: (top left) Incoe Corp., Balancing People, Process and Technology for Program Management Success Source: Eifel Inc. Editorial Advisory Board 2023-2026: Corey Alton Fox, Accede Mold & Tool Source: Accede Mold & Tool Introducing new editorial advisory board (EAB) member, Corey Alton Fox. bottom left) Sodick Inc.,

3D printing 105

3D printing Sourcing Function Form 105