Metrology

JUNE 4, 2024

North Carolina State University researchers have demonstrated a technique that allows companies who manufacture metal machine parts with 3D printing technologies to conduct automated quality control of manufactured parts during the finishing process.

3D printing 52

3D printing Automation Manufacturing Additive manufacturing 52

Metrology

OCTOBER 19, 2022

Formula One team McLaren Racing is responding to tighter vehicle production time and budget limits from the FIA by 3D printing tens of thousands of parts with large next-generation Neo 800. The post McLaren Racing Saves on Quality Assurance Processes With 3D Printing appeared first on Metrology and Quality News - Online Magazine.

3D printing 111

3D printing Additive manufacturing Manufacturing 111

AU Manufacturing

APRIL 2, 2023

Manufacturers using welding techniques suffer from limitations in realising complex structures because of the limited process of building one layer at a time – this is because subsequent layers are laminated after complete solidification preventing the molten metal from flowing down.

3D printing 67

3D printing Manufacturing Additive manufacturing Form 67

i4.0 today

JANUARY 29, 2024

It has been recently reported that, following a freedom of information request, there has been two incidents of 3D printed guns uncovered in Scotland. 3D printing machine during work process The additive and 3D printing technologies offer an exciting range of possibilities for the manner in which design and manufacture is carried out.

3D printing 52

3D printing Additive manufacturing Manufacturing Industry 4.0 52

Metrology

APRIL 15, 2024

Build processors link 3D printers with data preparation software, streamlining the additive manufacturing process from design to print. The post Partnership To Increase Metal 3D Printing Efficiency appeared first on Metrology and Quality News - Online Magazine.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Metrology

NOVEMBER 27, 2023

The post Neutrons See Stress In 3D-Printed Parts – Advancing Additive Manufacturing appeared first on Metrology and Quality News - Online Magazine. However, measuring real-time effects of processing on stress evolution is not possible with conventional techniques.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Metrology

MAY 30, 2024

Additive manufacturing processes have been used on a daily basis for a long time at BMW Group Plant Landshut. For many years, these have included moulds for the manufacturing of aluminium cylinder heads, which are printed three-dimensionally using the sand casting process.

3D printing 52

3D printing Robotics Robotics Additive manufacturing 52

Metrology

DECEMBER 14, 2022

As additive manufacturing (AM) / 3D printing gains more and more traction as a production technology, so scrutiny on the end products produced by the process becomes more and more. The post Quality and Validation in 3D Printing appeared first on Metrology and Quality News - Online Magazine.

3D printing 64

3D printing Additive manufacturing Manufacturing 64

Metrology

NOVEMBER 7, 2023

Additive manufacturing, often referred to as 3D printing, has revolutionized the manufacturing industry by enabling the production of complex and customized parts with unprecedented ease and speed.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Metrology

MARCH 20, 2023

Materialise, a leader in 3D printing software and service solutions, has announced its Process Control software for metal 3D printing and introduced the Build Processor Software Development Kit (BP SDK).

3D printing 64

3D printing Process control Additive manufacturing Manufacturing 64

MEM

JUNE 22, 2023

3D printing is making waves throughout the automotive manufacturing industry and opening up new possibilities. Malcolm Nicholls Limited are a team of experts leading the way in rapid prototyping, 3D printing, and low-volume manufacturing. So, 3D printing accelerates automotive production and is here to stay.

3D printing 52

3D printing Automotive Rapid prototyping Prototype  52

Modern Machine Shop

MAY 12, 2024

Now, APG’s sister company uses 3D printed jaws more optimized to this process. One of the first applications the company found for metal 3D printing has proven to be a valuable business opportunity, both for serving internal needs of its sister machining business and now, those of outside customers as well.

3D printing 52

3D printing Cycle time Form Additive manufacturing 52

i4.0 today

JUNE 11, 2024

Central Scanning Limited is excited to announce an Open Day event on Thursday, 27 June 2024, inviting businesses and individuals to explore the revolutionary possibilities of 3D Printing and 3D Scanning technologies. RSVP and Attendance: To attend, please register for the event at 3d-printing-and-3d-scanning-tickets.

3D printing 52

3D printing Aerospace Automotive Additive manufacturing 52

Metrology

MARCH 11, 2024

The solution will help make metal additive manufacturing (AM) more economically viable. The post Materialise Redefines Data and Build Preparation For Metal 3D Printing appeared first on Metrology and Quality News - Online Magazine.

3D printing 52

3D printing Additive manufacturing Automation Manufacturing 52

Metrology

NOVEMBER 8, 2023

Nikon SLM Solutions and Materialise, both global leaders in 3D printing technologies, have unveiled a collaborative venture to cultivate the ensuing generation of Materialise build processors tailored for Nikon SLM Solutions printers, seamlessly integrating them into the Materialise CO-AM platform.

3D printing 59

3D printing Additive manufacturing Manufacturing 59

Metrology

NOVEMBER 20, 2022

Hexagon’s Manufacturing Intelligence division and Stratasys, a leader in polymer 3D printing solutions, have applied Hexagon’s simulation technology to capture the behaviour of Stratasys’ high-performance, ultra-lightweight Antero reinforced polyetherketoneketone (PEKK).

3D printing 59

3D printing Manufacturing Additive manufacturing 59

Metrology

AUGUST 31, 2023

The IQM has been developed as part of the EU-project InterQ, aiming at zero-defect manufacturing. The post New Quality Platform For Industrial 3D-Printing Solutions appeared first on Metrology and Quality News - Online Magazine.

3D printing 52

3D printing Compliance Manufacturing Additive manufacturing 52

Metrology

SEPTEMBER 28, 2023

Meltio has launched the Meltio Robot Cell, a turn-key metal 3D printing solution to boost the performance of industrial robotic arms in a safer, more reliable, and highly accurate way by controlling the entire process.

3D printing 52

3D printing Robotics Robotics Additive manufacturing 52

Metrology

NOVEMBER 2, 2022

Hexagon and Raytheon Technologies have partnered to deliver a simulation tool that will enable evaluation and optimisation of metal additive manufacturing (AM) processes through the prediction of thermal history and defects at.

3D printing 64

3D printing Additive manufacturing Manufacturing 64

Metrology

NOVEMBER 14, 2022

Markforged, strengthening manufacturing resiliency by enabling industrial production at the point of need, has announced the release of new Simulation features for its additive manufacturing software. The post Removing 3D Printing Guesswork With New Simulation Software appeared first on Metrology and Quality News - Online Magazine.

3D printing 59

3D printing Additive manufacturing Manufacturing 59

Metrology

APRIL 12, 2023

As additive manufacturing (AM) printing becomes an embedded production technology, the scrutiny on every aspect of the AM process chain intensifies. The post A ‘Look Inside’ How 3D Print Bureau Addresses Quality Issues appeared first on Metrology and Quality News - Online Magazine.

3D printing 59

3D printing Additive manufacturing Manufacturing 59

Metrology

AUGUST 22, 2023

The results of the study showed a 38% reduction in GHG emissions for the additive manufacturing process as compared to the traditional casting-based method. The post New Research Demonstrates Sustainable Benefits of Binder Jet 3D Printing appeared first on Metrology and Quality News - Online Magazine.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Metrology

SEPTEMBER 11, 2023

One of the challenges to broader adoption of 3D printing is how to examine a part to ensure it contains no hidden flaws that could affect performance. The post ZEISS & ORNL Sign Licensing Agreement For Inspection of 3D-Printed Parts appeared first on Metrology and Quality News - Online Magazine.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

MEM

NOVEMBER 16, 2022

At Formnext, Markforged, the company strengthening manufacturing resiliency by enabling industrial production at the point of need, announced the release of new Simulation features for its additive manufacturing software. Incorporating 3D printing into tooling and end-use applications requires confidence in part strength.

3D printing 59

3D printing Additive manufacturing Composites Manufacturing 59

Metrology

NOVEMBER 5, 2023

Oak Ridge National Laboratory researchers have developed artificial intelligence software for powder bed 3D printers that assesses the quality of parts in real time, without the need for expensive characterization equipment.

3D printing 52

3D printing Artificial Intelligence Additive manufacturing Manufacturing 52

MEM

SEPTEMBER 12, 2023

High performance 3D printing material PA12 is now available ~ SAF material offers better part rigidity and lowers cost per part ~ To give manufacturers access to durable, low-cost Selective Absorption Fusion (SAF) materials, UK provider of Stratasys 3D printing solutions, Tri-Tech 3D , has now made Polyamide (PA) 12 available to its users.

3D printing 52

3D printing Prototype  Consumer Goods Function 52

Metrology

JANUARY 8, 2023

From carbon fiber to concrete, additive manufacturing, the industrial term for 3D-printing, utilizes many different materials and techniques. The post Forging New Science For The Future of 3D Printed Metal appeared first on Metrology and Quality News - Online Magazine.

3D printing 52

3D printing Supply Chain Additive manufacturing Manufacturing 52

MEM

MAY 31, 2023

The UK’s definitive and most influential 3D printing and additive manufacturing event, TCT 3Sixty will take place on 7-8th June at the NEC, Birmingham. Many of these experts are helping to shape AMUK, which is the new trade association for the sector.

3D printing 52

3D printing Additive manufacturing Manufacturing Aerospace 52

Mold Making Technology

MARCH 1, 2023

MMT founder Joe Prischak would be very happy to hear that quote because that was his intention when he decided to launch MoldMaking Technology magazine a quarter century ago. .” Angelo Morra, VP – sales & marketing, Top Grade Molds Ltd. He wanted a place where his community of moldmakers could share and learn.

3D printing 98

3D printing Lean manufacturing Industry 4.0 Industry 4.0 98

Metrology

DECEMBER 1, 2022

The machine tool’s tactile measuring sensors determine the position and location of the parts to be milled, The post More Efficient Machining of 3D-Printed Metal Parts appeared first on Metrology and Quality News - Online Magazine.

3D printing 59

3D printing Additive manufacturing Manufacturing 59

MEM

MAY 15, 2023

Manufacturing: TCT Group Announces the Inaugural TCT UK User Group In an effort to address the challenges that are stifling additive manufacturing adoption in the UK, the TCT Group are delighted to announce details of the inaugural TCT UK User Group meeting set to take place on the 6th June, the day before TCT 3Sixty at the NEC, Birmingham.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Metrology

OCTOBER 21, 2024

Additive Manufacturing, particularly metal 3D printing, has evolved from a promising technology to a serious constituent of industrial production. The post Additive Manufacturing In The Throes of Technological Change appeared first on Metrology and Quality News - Online Magazine.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

Metrology

MARCH 2, 2023

Velo3D, a leading metal additive manufacturing technology company for mission-critical parts, has announced the latest release of its Flow print preparation software. Software Provides Enhanced Level of Control Over 3D Printing Process appeared first on Metrology and Quality News - Online Magazine.

3D printing 59

3D printing Additive manufacturing Manufacturing 59

i4.0 today

OCTOBER 18, 2022

Composite-based additive manufacturing appears to be on the verge of breaking through as a ‘mainstream’ method of production, according to a new report on disruptive 3D printing technologies. Current 3D printing simply cannot deliver the level of precision and material strength required for these applications.

3D printing 52

3D printing Composites Additive manufacturing Cycle time 52

i4.0 today

JANUARY 22, 2024

3D printing is a digital manufacturing technology, meaning that a large part of the production process is managed online. However, finishing the printed components still has some manual process steps. As its name implies, additive manufacturing adds material to create an object.

3D printing 52

3D printing Computer-Aided Design (CAD) Additive manufacturing Rapid prototyping 52

i4.0 today

SEPTEMBER 23, 2022

Composite-based additive manufacturing appears to be on the verge of breaking through as a ‘mainstream’ method of production, according to a new report on disruptive 3D printing technologies. Current 3D printing simply cannot deliver the level of precision and material strength required for these applications.

3D printing 52

3D printing Composites Additive manufacturing Cycle time 52

i4.0 today

OCTOBER 18, 2022

When it comes to history and awareness, polymer additive manufacturing leads the 3D printing industry. The first type of 3D printing to be invented in the 1980s was stereolithography, while thermoplastic filament extrusion holds the most public recognition amongst additive technologies. billion in 2033.

3D printing 52

3D printing Prototype  Additive manufacturing Consumer Goods 52