i4.0 today

JULY 25, 2022

CEMEX and COBOD have been working together over the last year to innovate in the 3D printing space. Through this partnership, they recently introduced a 3D printing solution that utilizes conventional ready-mix concrete in the building process. COBOD 3D printed Europe’s first building in 2017. About COBOD.

3D printing 52

3D printing Value chain Robotics Robotics 52

i4.0 today

MAY 9, 2023

Siam Cement Group (SCG), the largest and the oldest cement and building material company in Thailand and Southeast Asia, has recently revealed the successful completion of the first 2-story 3D printed building in ASEAN. What is more striking is the fact, that the building is the first 3D printed medical center in the whole world.

3D printing 52

3D printing Industry 4.0 Industry 4.0 52

i4.0 today

OCTOBER 18, 2022

Composite-based additive manufacturing appears to be on the verge of breaking through as a ‘mainstream’ method of production, according to a new report on disruptive 3D printing technologies. Current 3D printing simply cannot deliver the level of precision and material strength required for these applications.

3D printing 52

3D printing Composites Additive manufacturing Cycle time 52

i4.0 today

SEPTEMBER 23, 2022

Composite-based additive manufacturing appears to be on the verge of breaking through as a ‘mainstream’ method of production, according to a new report on disruptive 3D printing technologies. Current 3D printing simply cannot deliver the level of precision and material strength required for these applications.

3D printing 52

3D printing Composites Additive manufacturing Cycle time 52

i4.0 today

JANUARY 29, 2024

It has been recently reported that, following a freedom of information request, there has been two incidents of 3D printed guns uncovered in Scotland. 3D printing machine during work process The additive and 3D printing technologies offer an exciting range of possibilities for the manner in which design and manufacture is carried out.

3D printing 52

3D printing Additive manufacturing Manufacturing Industry 4.0 52

i4.0 today

OCTOBER 18, 2022

When it comes to history and awareness, polymer additive manufacturing leads the 3D printing industry. The first type of 3D printing to be invented in the 1980s was stereolithography, while thermoplastic filament extrusion holds the most public recognition amongst additive technologies. billion in 2033.

3D printing 52

3D printing Prototype  Additive manufacturing Consumer Goods 52

i4.0 today

JANUARY 17, 2025

The IDTechEx report 3D Electronics/Additive Electronics 2024-2034: Technologies, Players, and Markets forecasts the opportunity being $4.3 Billion in 2034, from a humble start of 3D printed antennas and capacitive touch switches. The post 3D Electronics: A New Frontier of Product Differentiation appeared first on i4.0

Electronics 52

Electronics 3D printing Automotive Supply Chain 52

i4.0 today

AUGUST 16, 2022

The membership of the company´s Loctite 3D Printing business underlines the commitment to sustainability initiatives and aims to open up discussions on the environmental benefits of additive design and foster the adoption of (AM) in the future. To learn more about Henkel’s innovation in 3D printing, visit LoctiteAM.com.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Form 98

i4.0 today

JULY 21, 2023

Using COBOD’s state-of-the-art 3D printing technology, the firm aims to create homes that are more durable, disaster-resilient and in tune with the surrounding environment. “We’re preparing a new generation of tech-driven construction professionals, armed with the skills to reshape the industry.”

3D printing 52

3D printing Industry 4.0 Industry 4.0 52

i4.0 today

NOVEMBER 1, 2022

Nexa3D, a global leader in ultrafast polymer 3D printing solutions has released an ESD-safe resin for the fabrication of static-dissipative parts, powered by Mechnano’s Mech T. The post Mechnano’s MechT Selected by Nexa3D for 3D Printing of Static-Dissipative Parts appeared first on i4.0 Today Magazine.

3D printing 52

3D printing Electronics Additive manufacturing Prototype  52

i4.0 today

JANUARY 22, 2024

3D printing is a digital manufacturing technology, meaning that a large part of the production process is managed online. However, finishing the printed components still has some manual process steps. Precisely the finishing of the printed parts is something that primarily requires manual handling. million.

3D printing 52

3D printing Computer-Aided Design (CAD) Additive manufacturing Rapid prototyping 52

Metrology

SEPTEMBER 3, 2024

Strategic investment will accelerate the growth and development of Interspectral’s digital twin solutions, which are transforming the landscape of smart manufacturing in Industry 4.0, with a special focus on enhancing metal additive manufacturing aka 3D printing.

3D printing 52

3D printing Industry 4.0 Industry 4.0 Smart manufacturing 52

i4.0 today

MARCH 31, 2023

The villa in the capital city of Riyadh is the first 3D printed building from Dar Al Arkan. It was 3D printed in just 26 days and is fully compliant with the building codes, making it a bright example of how technology and innovation can work hand in hand with safety and regulation. Today Magazine.

3D printing 52

3D printing Function Sourcing Industry 4.0 52

i4.0 today

NOVEMBER 28, 2024

The company’s cutting-edge precious metal AM solutions offer a gateway to quality and innovation in the realm of 3D printing, a service which has seen increasing demand within the industry. For more information on precious metal AM at Cookson Industrial, visit: www.cookson-industrial.com. Today Magazine.

Additive manufacturing 52

Additive manufacturing Manufacturing 3D printing Electronics 52

i4.0 today

SEPTEMBER 5, 2022

Further key industry specialists taking part this year include: 123 Insight Limited. Inspire 3D. Today Magazine. Kerry Logistics. and many many more.

Supply Chain 97

Supply Chain 3D printing Manufacturing Industry 4.0 97

i4.0 today

FEBRUARY 7, 2023

Made Smarter has helped manufacturers adopt technologies which enable them to integrate systems, capture and analyse data, and even create simulations of their plants and processes, others are now using 3D-printing, automation and robotics to solve business challenges and meet increased demand. Today Magazine.

Industry 4.0 52

Industry 4.0 Industry 4.0 Manufacturing 3D printing 52

i4.0 today

APRIL 1, 2025

At the event, visitors can experience live demonstrations of Accus cutting-edge ant weight combat robots called AccuBots, made possible with Accu components and 3D printing technology. Today Magazine.

3D printing 52

3D printing Robotics Robotics Manufacturing 52

i4.0 today

FEBRUARY 8, 2024

Ten years ago, the 3D printing landscape was in the midst of its first big boom. The general public was being introduced to the possibilities of 3D printing through countless eye-popping headlines that speculated on 3D printing’s application in everything from toys to phones to organs.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Composites 52

Fabricating & Metal Work

FEBRUARY 12, 2023

By collaborating with its customers, CERATIZIT is responding to changes in the industry, such as the increases in eMobility related projects, and the exploration of 3D printing technologies for mass production of parts. The company is already providing advanced solutions regarding 3D printed parts. will follow.

3D printing 84

3D printing Composites Supply Chain Automotive 84

MEM

NOVEMBER 15, 2022

The centre will also support the exploration of 3D printing with polymers and ceramics, providing several on-site fused deposition modelling (FDM), stereolithography (SLA), and selective laser sintering (SLS) systems, providing members a test bed for most AM and post-processing technologies.

Additive manufacturing 59

Additive manufacturing 3D printing Manufacturing Industry 4.0 59

i4.0 today

JULY 18, 2023

3D printing has revolutionised manufacturing. Where traditional subtractive technologies relied on removing material from a billet or block to obtain the desired shape, 3D printing now offers high throughput and high-levels of surface finishing. Today Magazine. million by 2030.

3D printing 52

3D printing Manufacturing Additive manufacturing Rapid prototyping 52

i4.0 today

FEBRUARY 10, 2025

Accu, one of the UKs leading precision engineering component distributors, has introduced Brass Threaded Inserts to its range, which will open up new opportunities for designers and engineers, particularly those working in plastic prototyping and 3D printing. Today Magazine. For more information about Accu visit www.accu.co.uk.

3D printing 52

3D printing Prototype  Supply Chain Fit 52

Modern Machine Shop

JANUARY 10, 2023

Yet if you happen to follow this column in our magazine, you know it has shifted to a different page than where it previously appeared. I will not leave the magazine; I will continue to support the MMS team in ways that might not be visible to readers, and this column, “The Z Axis,” will continue. Until then.

Additive manufacturing 94

Additive manufacturing 3D printing Industry 4.0 Industry 4.0 94

i4.0 today

DECEMBER 16, 2024

Today Magazine. As we enter our 7th year, we are more determined than ever to reach more SME manufacturers across the sector to talk to them about the benefits of introducing new technologies and new digital skills. For more information, visit www.madesmarter.uk.

Manufacturing 52

Manufacturing Robotics Robotics 3D printing 52

i4.0 today

OCTOBER 27, 2022

The main goal is to empower enthusiasts and professionals from industry as well as academia who are passionate about designing and manufacturing 3D printed electronics. “ We believe many talented designers and engineers want to manufacture and bring 3D printed electronics to the next level. Today Magazine.

3D printing 52

3D printing Electronics Additive manufacturing Sourcing 52

i4.0 today

DECEMBER 15, 2022

community, professionals and enthusiasts from different fields are able to collaborate, bringing together a rich array of experience and knowledge that is gathered from a variety of manufacturing processes, design methods, and materials across multiple industries to form a comprehensive initiative. Today Magazine. Joining the J.A.M.E.S

3D printing 52

3D printing Electronics Additive manufacturing Industry 4.0 52

Manufacturer's Monthly

JANUARY 9, 2023

Many success stories have been told in this magazine throughout the years, highlighting the brilliant minds in Australia’s manufacturing industries – here are just a few examples of this country’s innovation capability, picked from IMCRC’s portfolio of more than 70 research collaborations. Industry 4.0

Manufacturing 98

Manufacturing Industry 4.0 Industry 4.0 3D printing 98

i4.0 today

NOVEMBER 11, 2022

Mechnano announces that Asiga, a global leader in 3D printing equipment manufacturing, has approved its Formula1 ESD-safe resin for use on all Asiga printers. Today Magazine. ranges). “ Learn more at mechnano.com and LinkedIn. The post Mechnano’s Formula1 ESD-Safe Resin Now Approved for Asiga Printers appeared first on i4.0

3D printing 52

3D printing Additive manufacturing Electronics Aerospace 52

i4.0 today

OCTOBER 6, 2022

The Scottish manufacturing industry and its associated supply chain are facing the ongoing challenge of adapting to the disruptive changes generated by the digital revolution and the ‘Fourth Industrial Revolution’ (Industry 4.0). Digital Transformation in Manufacturing: a practical approach to Industry 4.0’

Supply Chain 52

Supply Chain Industry 4.0 Industry 4.0 3D printing 52

i4.0 today

OCTOBER 25, 2023

The first-of-its-kind solution enables Non-Fungible Tokens (NFT) backed blockchain-protected and certified design assets to be 3D printed on-demand locally. Today Magazine. At this much-anticipated event, attendees will be given a glimpse into the future of additive manufacturing and intellectual property protection.

3D printing 52

3D printing Supply Chain Manufacturing Automotive 52

i4.0 today

AUGUST 23, 2022

Desktop Metal and Henkel have announced the first initial workflow validations on the Xtreme 8K, the largest DLP build volume machine for the 3D Printing market. Over the past two years, the companies have collaborated on various unique applications on ETEC’s printer platforms for industrial and medical use. About Henkel.

3D printing 52

3D printing Rapid prototyping Additive manufacturing Prototype  52

i4.0 today

AUGUST 3, 2023

Josh Dugdale, the MTA’s Head of Technology & Skills said: “Mastering AM provides a platform for Additive Manufacturing and 3D Printing users to come together and share best industry practice. Today Magazine. The content-packed agenda offers attendees plenty of options on what to see, hear, and learn.

3D printing 52

3D printing Additive manufacturing Benchmarking Supply Chain 52

i4.0 today

OCTOBER 10, 2024

To show visitors how additive manufacturing (AM) can streamline their factory floor production, Tri-Tech 3D , UK provider of Stratasys 3D printing solutions, is attending the Scotland Manufacturing & Supply Chain Conference & Exhibition. Today Magazine. or speak to a member of the team.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Supply Chain 52

i4.0 today

AUGUST 23, 2024

To show visitors how additive manufacturing (AM) can streamline their factory floor production, Tri-Tech 3D , UK provider of Stratasys 3D printing solutions, is attending the Scotland Manufacturing & Supply Chain Conference & Exhibition. Today Magazine. or speak to a member of the team.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Supply Chain 52

i4.0 today

NOVEMBER 9, 2022

Our joint-venture will carry out the role of sales, distribution and market development in Indonesia, and all business activities to build up the 3DCP technology ,” While COBOD has realized significant sales of its 3D construction printers in North and South America, Europe and Asia, COBOD has yet to deliver a printer to Indonesia.

3D printing 52

3D printing Robotics Robotics Automation 52

Dinesh Mishra

DECEMBER 29, 2023

In 2023, Meshmix Media witnessed significant success and growth, driven by the launch of impactful initiatives such as ‘Breaking Bread with DMI,’ compelling industry webinars, and engaging conferences, not only strengthened our industry presence but also underscored our commitment to fostering innovation and knowledge exchange.

3D printing 52

3D printing Industry 4.0 Industry 4.0 Form 52

i4.0 today

AUGUST 21, 2024

EOS , a leading supplier of industrial 3D printing solutions, has today announced the successes of its project with customer Atlas Copco. Today Magazine. By transitioning to in-house polymer-based Additive Manufacturing (AM) with EOS technology, Atlas Copco has cut production costs by 30% and lead times by 92%.

Lead Time 52

Lead Time 3D printing Rapid prototyping Prototype  52