i4.0 today

MARCH 13, 2023

This is the promise of ‘3D electronics’, where the boundaries between mechanical and electrical design fade away and components have the electronic functionality embedded within them. Fully and partially additive electronics are applicable to many applications and span a wide range of length scales.

Electronics 52

Electronics Function 3D printing Supply Chain 52

Additive Manufacturing

JANUARY 6, 2023

Not only does this board increase Gigabot & Terabot processing power, but it supports better control of re:3D’s supply chain and electronics quality with a strong US manufacturing partner. Our relationship with UltiMachine has been critical in ensuring supply chain resiliency.”

Supply Chain 52

Supply Chain 3D printing Electronics Additive manufacturing 52

Additive Manufacturing

AUGUST 1, 2022

NEW YORK (August 1, 2022) – An estimated six million patients have benefitted directly or indirectly from medical applications of additive manufacturing (AM) and 3D printing – from orthopedic and cranial implants to surgical guides and instruments to dental restorations and external prosthetics. The overall AM industry grew to $11.7

3D printing 97

3D printing Supply Chain Manufacturing Additive manufacturing 97

i4.0 today

OCTOBER 6, 2022

The Manufacturing & Supply Chain Conference & Exhibition, which is being held at the SEC Glasgow on Thursday, 13th of October 2022, will be the largest event of its kind in Scotland. Given the current situation of rampant inflation and escalating energy costs, his remarks will be eagerly anticipated.

Supply Chain 52

Supply Chain Industry 4.0 Industry 4.0 3D printing 52

AU Manufacturing

FEBRUARY 23, 2023

Wayland Additive said it is ramping up the production of its Calibur3 metal Additive Manufacturing machine in a push to “insulate customers against supply chain delays.” ” In a press release, Wayland said it currently has six machines producing goods to fill orders.

Additive manufacturing 67

Additive manufacturing Supply Chain 3D printing Manufacturing 67

Manufacturer's Monthly

JUNE 13, 2023

Holmes Imager is a testament to Australia’s technological prowess and strong supply chain. Their expertise in high-precision diamond turning, optics and electronics design, manufacturing, and 3D printing has been instrumental in advancing our hardware products.

3D printing 98

3D printing Supply Chain Robotics Robotics 98

i4.0 today

JANUARY 16, 2025

Emphasising the must see nature of the event is the presence of prominent exhibitors including Schneider Electric, FANUK UK, 3M, Epicor, Binder UK, Cembre, Charter Controls, Ericsson, Hoffmann Group and ifm Electronic. Alongside other big names the exhibition floor will showcase the most influential players in industry.

Smart manufacturing 52

Smart manufacturing Manufacturing 3D printing Advanced manufacturing 52

Additive Manufacturing

MAY 8, 2023

Check out the AM Voices Podcast to get caught up on their full in-booth interviews!

3D printing 52

3D printing Supply Chain Additive manufacturing Electronics 52

Additive Manufacturing

MAY 12, 2023

Check out AM News LIVE for pre-show news and guests, as well as the AM Voices Podcast to get caught up on their full in-booth interviews!

3D printing 52

3D printing Supply Chain Prototype  Additive manufacturing 52

i4.0 today

APRIL 24, 2023

describes Dr. Ashok Sridhar , CEO of TracXon, “ Not only do we supply functional films with our R2R process and materials, we can now address a larger array of applications including intelligent lighting and smart human-machine interfaces, but also do it in a sustainable and recycling-friendly manner, thus unlocking multiple benefits to the market.

Supply Chain 52

Supply Chain Electronics Function Additive manufacturing 52

Automation Mag

JANUARY 10, 2025

Haddy is revolutionizing furniture manufacturing with advanced 3D printing and robotics, producing high-quality, sustainable products at a low cost and on a commercial scale. Easy-to-use workflows enable engineers to do failure analysis 100x faster.

Manufacturing 105

Manufacturing Rapid prototyping 3D printing Supply Chain 105

i4.0 today

FEBRUARY 10, 2025

Accu, one of the UKs leading precision engineering component distributors, has introduced Brass Threaded Inserts to its range, which will open up new opportunities for designers and engineers, particularly those working in plastic prototyping and 3D printing. For more information about Accu visit www.accu.co.uk. Today Magazine.

3D printing 52

3D printing Prototype  Supply Chain Fit 52

AU Manufacturing

DECEMBER 8, 2022

In a press release , Lockheed Martin said the new collaboration will look into additional AM technology areas, including laser powder bed fusion, electron beam-directed energy deposition, and friction-stir AM. . AM touts the capability of improving efficiencies in existing castings and forgings supply chains, Lockheed Martin said.

Additive manufacturing 69

Additive manufacturing Supply Chain Manufacturing Electronics 69

Manufacturer's Monthly

JANUARY 4, 2023

“Every country has been hit by supply chain issues over the past few years. We are more in control of our supply chains and our margins.” Executives had to decide where to assemble it and several factors made executives think again about investing in Asia. ” A collaborative manufacturing centre.

Advanced manufacturing 98

Advanced manufacturing Manufacturing Supply Chain Prototype  98

Mold Making Technology

MAY 2, 2023

Initially, that involved 3D printing metal tool components, details and geometries that would otherwise need to be EDM’d. The facility also features two EOS M 280 DMLS printers, two GE Arcam Q20 electron beam melting (EBM) printers and two Desktop Metal Shop System metal binder jet printers.

Cycle time 98

Cycle time 3D printing Additive manufacturing Supply Chain 98

E&T

SEPTEMBER 22, 2023

The nature of the factory floor and supply chains continues to evolve, hailing a new era of efficiency and agility driven by automation, data analytics, and interconnected systems. Innovative technologies have the potential to revolutionise every aspect of the value chain.

Manufacturing 69

Manufacturing Supply Chain 3D printing Smart manufacturing 69

Additive Manufacturing

JANUARY 5, 2023

Whether by opening new research facilities, building partner networks, acquiring companies, co-developing applications and technology, receiving grants, raising capital, or other activities, the additive manufacturing industry is committed to supporting 3D printing professionals in achieving their goals. and Desktop Metal, Inc.

Additive manufacturing 59

Additive manufacturing 3D printing Manufacturing Digital manufacturing 59

Additive Manufacturing

AUGUST 3, 2022

NEW YORK (August 1, 2022) – An estimated six million patients have benefitted directly or indirectly from medical applications of additive manufacturing (AM) and 3D printing – from orthopedic and cranial implants to surgical guides and instruments to dental restorations and external prosthetics. The overall AM industry grew to $11.7

3D printing 52

3D printing Supply Chain Manufacturing Additive manufacturing 52

Additive Manufacturing

JULY 20, 2022

.: The applications that you’re seeing and applying for new products, is that utilizing design for additive manufacturing or relying on supply chain? We see the supply chain is catching up. The supply base gets engaged much later, depending on what the product is. All of them have opportunities.

Additive manufacturing 98

Additive manufacturing Automotive Manufacturing Prototype  98

Modern Machine Shop

SEPTEMBER 13, 2024

This shift is driven by concerns over supply chain resilience and a desire for greater control over quality and lead times. Additive manufacturing, particularly 3D printing, has transitioned from an experimental technology to a mature and widely accepted tool in the moldmaking industry.

3D printing 91

3D printing Automation Robotics Robotics 91

Fabricating & Metal Work

JUNE 5, 2023

This is in large part due to its superior thermal conductivity, which is desirable in rocketry and industrial applications such as electronics, where heat exchange is critical. It was essentially a powder looking for a process, for years—before it found its niche in 3D printing.” Cleland

3D printing 52

3D printing Additive manufacturing Composites Electronics 52

Modern Machine Shop

APRIL 10, 2023

I almost ran my car off the road, when you look at the supply chain, and be able to say, hey, each region, every country in the world today, we need to make sure that we secure our own interests. Before the end of the next day, I was an electronic assembler. So it was really optimizing a supply chain, a low-cost supply chain.

Made-to-spec 98

Made-to-spec Supply Chain Logistics Manufacturing 98

Fastener News Desk

JULY 17, 2023

After almost three years of the COVID-19 pandemic and related supply chain problems, the supply situation is improving for the Group. In general, it can be said that supply chains have stabilized significantly again, which means that availability has almost reached the pre-crisis level.

3D printing 52

3D printing Supply Chain Fit Electronics 52

Fastener News Desk

JULY 25, 2023

Watch now on YouTube @FastenerTV: (12:30) The looming possibility of a UPS strike is of deep concern to the nation’s supply chain professionals…according to a new analysis by the consulting firm Anderson Economic Group (AEG) A 10-day UPS strike could cost the US economy more than $7B, with $4B in losses for consumers & small businesses.

Supply Chain 52

Supply Chain Electronics 3D printing Artificial Intelligence 52

Trimantec

JANUARY 22, 2020

Benefits of manufacturing outsourcing: Avoids added expenses including those arising from additional workers, working space, supply chain management, and equipment acquisitions. Automation technology is becoming less mechanical and more electronic and electromechanical. Printed Circuit Boards (PCBs). 3D Printer.

Manufacturing 52

Manufacturing 3D printing Assembly Line Made-to-spec 52

Fabricating & Metal Work

MARCH 25, 2024

Workshop topics include “Make Your Shop a Top Shop,” “The Shop of Our Future,” and “3D Printing for Job Shops.” The IMTS Supply Chain Forum, co-presented by the Council of Supply Chain Management Professionals, will deliver direct strategies and proven techniques for leaner, more agile, more profitable supply chains.

Supply Chain 40

Supply Chain 3D printing Industry 4.0 Industry 4.0 40

Manufacturer's Monthly

NOVEMBER 29, 2022

New South Wales is leading the charge with stage two of its Western Sydney Advanced Manufacturing Research Facility to focus on manufacturing of advanced semiconductor and electronics to address sovereign capability needs in defence and aerospace.

3D printing 98

3D printing Manufacturing Form Supply Chain 98

Mold Making Technology

SEPTEMBER 26, 2023

For example, MTE has been exploring additive manufacturing (AM), conformal cooling and 3D printing improvements. One Mitutoyo electronic touch probe. I am proud that MTE could be part of the PPE supply chain at that crucial time in our history. Welding Equipment One O.R. One 250 Miller Heliarc TIG welder.

Manufacturing 105

Manufacturing 3D printing Consumer Goods Robotics 105

Dinesh Mishra

OCTOBER 11, 2024

For example, the US and Japanese machine tool industries have seen varying levels of demand, which can impact the global supply chain and market dynamics. Lastly, the machine tool industry is diversifying into emerging areas such as electric vehicles, aerospace, electronics, and semiconductors.

Industry 4.0 52

Industry 4.0 Industry 4.0 Supply Chain Smart manufacturing 52

Modern Machine Shop

JANUARY 23, 2023

When we launched this show a couple of years ago, we focused on the key topics that drive our conversations about US manufacturing, the 2000s era collapse of our manufacturing workforce, controversy surrounding automation, supply chain problems that COVID-19 put in the spotlight. And from a supply chain, mining, manufacturing.

Sourcing 98

Sourcing Supply Chain Manufacturing 3D printing 98

Control Engineering

AUGUST 17, 2023

5G-enabled AR adoption case study 1: Haier’s multiyear journey Haier is a home appliance and consumer electronics company based in China and prides itself to be a world-renowned brand in China and globally. Figure 12: Case study Samsung Electronics summary. Figure 10: Case study Haier summary.

Industry 4.0 52

Industry 4.0 Industry 4.0 Smart manufacturing Electronics 52

Additive Manufacturing

APRIL 27, 2023

By building on the century-long Nikon foundation of cutting-edge opto-electronics and precision technologies, coupled with its iconic brand that is synonymous with trust, Nikon believes it will enable innovations in manufacturing with applied optics application technologies together with customers and partners.

Digital manufacturing 52

Digital manufacturing Manufacturing Advanced manufacturing Additive manufacturing 52

Mold Making Technology

FEBRUARY 21, 2023

The feedback from its 2022 debut revealed that the plastics supply chain is eager to reconnect and do business face-to-face once again. Because PTXPO brings the North American plastics supply chain together, there is more to this show than moldmaking! 3D Printing Additive tooling. CAE simulation services.

3D printing 90

3D printing Supply Chain Manufacturing Electronics 90

i4.0 today

APRIL 29, 2024

Engineering Industries Ireland (EII), the Ibec group representing the engineering manufacturing and services sector in Ireland, has been announced as the Headline Sponsor of the annual Manufacturing & Supply Chain Conference & Exhibition, scheduled to be held at RDS Simmonscourt in Dublin, on the 28th and 29th of May 2024.

Supply Chain 52

Supply Chain Manufacturing 3D printing Industry 4.0 52

Dinesh Mishra

SEPTEMBER 22, 2024

The recent trends in the CNC machine tool industry include the integration of additive manufacturing (3D printing) with CNC machining, enabling hybrid processes that combine both subtractive and additive methods. Additive Manufacturing (3D Printing): Additive manufacturing builds objects layer by layer from digital models.

Supply Chain 52

Supply Chain 3D printing Automation Industry 4.0 52

Mold Making Technology

JANUARY 26, 2023

Like other 3D printing technologies, AM offers higher design freedom than machining or forming metals, plastics or composites themselves, easily printing geometries that are impossible or extremely costly to achieve with conventional manufacturing technologies. meters in Lincoln’s metal 3D printing factory.

Composites 52

Composites 3D printing Cycle time Lead Time 52

Mold Making Technology

DECEMBER 4, 2022

Mold in a Day Technology Slashes Tool Production, Eliminates Supply Chain Headache. Next Chapter Manufacturing highlights its transformative “ Mold in a Day ” (MIAD) technology to accelerate the injection molding process, meeting the challenge of supply chain disruptions. Photo Credit: Addifab, Nexa3D.

3D printing 98

3D printing Cycle time Automation Additive manufacturing 98