Additive Manufacturing

JANUARY 16, 2023

Additive manufacturing software today does much more than support design and file prep for the process. PrintParts Launches SmartParts Software Integration Partner Program: PrintParts , an additive manufacturing technology company, launched its SmartParts Integration Partner Program. Ultimaker Release Ultimaker Cura 5.0:

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Smart manufacturing 98

Mold Making Technology

MARCH 19, 2024

Source (clockwise) | Steel 21, Trumpf, Molder’s World and TCI Precision Metals. Over the last few years, a focus on “next-generation” technologies has permeated the manufacturing industry — particularly regarding 3D printing and mold materials complementary to this process.

3D printing 59

3D printing Sourcing Additive manufacturing Robotics 59

Additive Manufacturing

JANUARY 11, 2023

Additive manufacturing hardware solution providers were once again busy in 2022. Highlights included more options for printing bigger and smaller, printing electronics and composites, and a couple of open platforms to allow more material development for industry and researchers.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Composites 98

Fastener News Desk

JULY 3, 2024

This collaboration signifies the start of a customer-focused mission to bring 3D printing to everyday applications. Since Würth Additive announced Digital Inventory Services (DIS) at the AMUG Conference in March 2024 , they have initiated a new era of inventory management solutions.

Additive manufacturing 52

Additive manufacturing 3D printing Supply Chain Manufacturing 52

Mold Making Technology

AUGUST 18, 2024

Source | Alpine Advanced Materials Alpine Advanced Materials (Alpine), a custom-engineering and part manufacturer in industries like aerospace and defense , space and emerging transportation, leveraged a new prototyping process utilizing a dissolvable mold for high-performance injection molded composites.

3D printing 52

3D printing Rapid prototyping Prototype  Composites 52

Fastener News Desk

JUNE 30, 2023

Industrial 3D printing specialist Würth Additive Group has announced its CEO AJ Strandquist has joined new task force focused on the use of additive manufacturing (AM) technology within the automotive repair industry. Source: TCT Take advantage of a $50.00 discount on your IFE 2023 registration.

3D printing 52

3D printing Rapid prototyping Additive manufacturing Automotive 52

Additive Manufacturing

MARCH 13, 2023

The beauty of today’s manufacturing environment is that anyone can start a 3D printing service bureau and begin printing parts today. According to a recent report by Persistence Markets , the 3D printing service bureau industry is projected to surge eight times the size of its present state over the next decade.

3D printing 98

3D printing Additive manufacturing Assembly Line Manufacturing 98

Additive Manufacturing

OCTOBER 14, 2022

As we consider existing 2022 trends and opportunities for additive manufacturing, coupled with the recent CHIPS and Science Act news (latest from Department of Commerce), as an industry we have some exciting times ahead. manufacturing technologies and jobs , the White House published the U.S.

Additive manufacturing 105

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 105

Mold Making Technology

JULY 5, 2023

Come to this session to learn some 3D printing best practices for producing hybrid tool inserts via recent real-world applications examples. Linear also works closely with the moldmaker at the front end of the design process to address these concerns by identifying the best part orientation on the build plate during the grow stage.

3D printing 52

3D printing Additive manufacturing Lead Time Sourcing 52

E&T

OCTOBER 25, 2022

Rocket builder Relativity Space has built a giant 3D-printing robot that could allow the company to build all kinds of large-format products besides the rockets it plans to launch, Relativity's chief executive Tim Ellis said. Speaking to Reuters, Ellis said: "This large-format metal 3D printing.

3D printing 81

3D printing Robotics Robotics Form 81

Additive Manufacturing

JULY 29, 2022

The material was first shown at this spring’s RAPID + TCT additive manufacturing conference. Jason Tzintzun , Marketing & Operations Manager for Source Graphics, was in attendance to beta test the support material. “As a 3D solutions provider, it’s great to have AquaSys GP to recommend to our customers. .”

3D printing 96

3D printing Additive manufacturing Sourcing Manufacturing 96

Manufacturer's Monthly

JANUARY 30, 2024

In an analysis conducted by Additive Manufacturing Research, the market study titled “Additive Manufacturing in the Energy Sector: Market Analysis & Forecast“ reveals significant opportunities and potential for 3D printing in the Energy sector, and compelling insights into the transformative role of AM within it.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Compliance 52

Additive Manufacturing

DECEMBER 7, 2022

Within additive manufacturing, there is a big focus on part and application qualification. What does that mean for the qualification of 3D printed parts? related to the Additive Manufacturing Policy. Most of these printers capable of printing green bin parts are polymer.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98

iBASEt

JUNE 7, 2022

When you think of a hospital printing organ implants and creating custom joint replacements in a matter of hours, you might be picturing a scene decades from now. Thanks to 3D printing, that reality is only a handful of years away. This is just one example of the potential impact of 3D printing.

3D printing 52

3D printing Digital manufacturing Manufacturing Execution System (MES) Manufacturing 52

AU Manufacturing

FEBRUARY 7, 2023

Upon completion, those components will be thoroughly examined to compare their functionality versus traditionally manufactured components. Different research groups are trying to make the components using additive manufacturing,” Roy said. In additive manufacturing, we have lot more grip on that,” the lead researcher added.

3D printing 77

3D printing Additive manufacturing Function Advanced manufacturing 77

Additive Manufacturing

MAY 3, 2023

Berkeley, CA (May 2, 2023) – polySpectra , maker of the world’s most rugged photopolymer resins, has announced its third Cyclic Olefin Resin (COR) material for durable 3D printing. At RAPID + TCT 2023, polySpectra has unveiled COR Bio, expanding the company’s reach into new markets with its first biocompatible 3D printing material.

3D printing 52

3D printing Additive manufacturing Prototype  Sourcing 52

Mold Making Technology

FEBRUARY 13, 2023

Now, Addifab has plugged 3D printing speed and design freedom directly into tool designer workflow, to enable a rewriting of the pilot tooling playbook. Soluble, 3D-printed injection mold cores and cavities is one of the essential innovations behind the novel Addifab freeform injection molding (FIM).

3D printing 52

3D printing Prototype  Additive manufacturing Sourcing 52

AU Manufacturing

MARCH 12, 2023

A research team led by the US Department of Energy’s (DOE) Argonne National Laboratory and the University of Virginia (UVA) has developed various imaging and machine-learning techniques to detect and predict the formation of pores in 3D-printed metals in real time with near-perfect accuracy.

3D printing 52

3D printing Additive manufacturing Sourcing Manufacturing 52

Mold Making Technology

JUNE 19, 2024

The design freedom of polymer/composite additive manufacturing (AM) makes it easy to design different front-facing/insert holding (middle left and right) and rear-facing/handle versions (right) of the claw manual end-of-arm tooling (EOAT) that Zero Tolerance LLC has produced for its own and customer molding operations.

3D printing 52

3D printing Manufacturing Composites Prototype  52

Dinesh Mishra

JULY 25, 2022

CEMEX and COBOD have been working together over the last year to innovate in the 3D printing space. Through this partnership, they recently introduced a 3D printing solution that utilizes conventional ready-mix concrete in the building process. COBOD 3D printed Europe’s first building in 2017. About COBOD.

3D printing 52

3D printing Value chain Robotics Robotics 52

AU Manufacturing

MAY 23, 2023

Thus, the defence industry must use all of its resources to advance military innovation, and metal additive manufacturing (AM) offers a special chance to do so. The use of modern metal AM can address sustainability issues by giving a reliable source of parts to increase the lifespan of current assets.

Additive manufacturing 59

Additive manufacturing 3D printing Supply Chain Manufacturing 59

Additive Manufacturing

OCTOBER 6, 2022

Vienna, Austria/October 6, 2022 — Lithoz GmbH announced that it has acquired Germany-based CerAMing, the patent holder of the Layer-wise Slurry Disposition (LSD)-Print ceramic 3D printing process. This strategic expansion further secures and extends Lithoz’s global market leadership as a system provider.

3D printing 52

3D printing Additive manufacturing Sourcing Manufacturing 52

MEM

MAY 9, 2023

Supercharging Additive Manufacturing with Software By Doug Kenik, director of software manufacturing, Markforged As the additive manufacturing industry matures, the pace of software innovation has sped up to a sprint. AM should enable users to scale as they adopt it more deeply into their current offerings.

Additive manufacturing 98

Additive manufacturing Manufacturing Fit Form 98

Modern Machine Shop

JULY 23, 2024

At its production plant in Iga, Japan, machine tool maker DMG MORI has now replaced a drawbar plating operation with directed energy deposition (DED) on one of the company’s own Lasertec 3000 DED hybrid additive manufacturing and turning/milling machines. But the drawbar is different from most or all the other additive parts.

Lead Time 96

Lead Time Additive manufacturing Manufacturing 3D printing 96

Fastener News Desk

APRIL 25, 2023

Smith and his team employed time-saving computer modeling, as well as a laser 3D printing process that fused metals together, layer-by-layer, to create the new alloy. Current state-of-the-art 3D printed superalloys can withstand temperatures up to 2,000 degrees Fahrenheit.

3D printing 52

3D printing Aerospace Sourcing Additive manufacturing 52

Fastener News Desk

NOVEMBER 19, 2023

There is a potential solution, however: additive manufacturing. and the cloud are enabling a vast digital manufacturing network in which a print job can be initiated in one part of the world and finished in another, exactly where the part is needed. Sometimes these production delays can be in the range of months.

Supply Chain 52

Supply Chain Additive manufacturing 3D printing Manufacturing 52

E&T

SEPTEMBER 23, 2022

Now, for the first time ever, 17-4 PH steel can be consistently 3D-printed while retaining its favorable characteristics. The researchers’ strategy, described in the journal Additive Manufacturing, is based on high-speed data about the printing process they obtained using high-energy X-rays from a particle accelerator.

3D printing 45

3D printing Composites Additive manufacturing Cargo 45

Fastener News Desk

SEPTEMBER 20, 2022

Aerospace, energy and other sectors now have an easy way to efficiently produce high-strength, high-temperature parts in volume with IN625 across a portfolio of 3D printing options. Shop System, a plug-and-play turnkey binder jet 3D printing system that reduces costs, shortens lead times and increases revenues for machine shops.

3D printing 52

3D printing Additive manufacturing Rapid prototyping Aerospace 52

AU Manufacturing

MARCH 24, 2023

A group of researchers, including scientists from Argonne National Laboratory (ANL) , has discovered a means to consistently manufacture 17-4 PH steel using 3D printing processes while keeping all of the material’s high-value properties.

3D printing 52

3D printing Composites Sourcing Advanced manufacturing 52

Fastener News Desk

MARCH 29, 2024

Written by: Matt Kremenetsky AJ Strandquist is a different kind of additive manufacturing (AM) CEO. Having risen up through Würth Industry ’s core fastener and assembly business for nearly a decade, Strandquist became a founder and the CEO of Würth Additive Group (WAG) when the company got off the ground in 2021.

3D printing 59

3D printing Bill of Materials Made-to-spec Supply Chain 59

Fastener News Desk

SEPTEMBER 10, 2024

Streamlining Inventory Management with Additive Manufacturing Risk mitigation is hard, boring work. Businesses across every industry have been accelerating their adoption of digital solutions to mitigate the impact of global disruptions, but the manufacturing sector lags behind. 2024 White Paper ALWAYS IN STOCK. Click here.

3D printing 52

3D printing Additive manufacturing Supply Chain Sourcing 52

Canadian Manufacturing

MAY 8, 2023

3D printing home (CNW Group/Nidus3D) CALGARY — nidus3D says they have successfully completed North America’s first energy-efficient and climate-resilient multi-unit 3D printed homes and two-story buildings last year in Ontario.

3D printing 52

3D printing Logistics Sourcing Additive manufacturing 52

Additive Manufacturing

NOVEMBER 9, 2022

For the additive manufacturing industry, the largest event of the calendar year is nearly upon us as Formnext 2022 is ready to kick off November 15-18 in Frankfurt, Germany. The trick about 3D printing, as we’ve learned over the years, is to look at announcements with a critical eye. It’s the most magical time of year!

Additive manufacturing 105

Additive manufacturing Manufacturing 3D printing Made-to-spec 105

Additive Manufacturing

DECEMBER 21, 2022

THE CHALLENGE: Additive manufacturing has progressed from being mainly a tool for low-cost prototyping to a manufacturing activity that can produce large volumes of high-value metallic components. Industry experts have identified quality control as one of the biggest obstacles to widespread additive manufacturing adoption.

3D printing 52

3D printing Additive manufacturing Composites Prototype  52

Modern Machine Shop

SEPTEMBER 13, 2024

Source: AMT - The Association for Manufacturing Technology The world’s leading additive manufacturing (AM) trade show is launching a U.S. This will further raise awareness of the opportunities offered by additive manufacturing across the industry. However, it is more than just 3D printing.

3D printing 52

3D printing Value chain Rapid prototyping Manufacturing 52

MESA

MAY 26, 2023

America Makes strives to accelerate the development and deployment of innovative, cost-effective, energy-efficient AM and 3D printed (3DP) technologies to meet defense and/or commercial needs. in Funding appeared first on Additive Manufacturing (AM). ET (Virtual TRX/Registration Required).

3D printing 130

3D printing Supply Chain Composites Additive manufacturing 130

Additive Manufacturing

FEBRUARY 24, 2023

But this was no vacation; rather, it was an intensive seven day examination into whether industrial additive manufacturing can have a role on Guam. Industrial 3D printing capabilities could be a game-changer for Guam, overcoming logistical challenges and reducing requisition times for mission-essential parts by 90%.

Additive manufacturing 59

Additive manufacturing 3D printing Supply Chain Manufacturing 59