Additive Manufacturing

JANUARY 11, 2023

Additive manufacturing hardware solution providers were once again busy in 2022. Highlights included more options for printing bigger and smaller, printing electronics and composites, and a couple of open platforms to allow more material development for industry and researchers.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Composites 98

E&T

OCTOBER 25, 2022

Rocket builder Relativity Space has built a giant 3D-printing robot that could allow the company to build all kinds of large-format products besides the rockets it plans to launch, Relativity's chief executive Tim Ellis said. Speaking to Reuters, Ellis said: "This large-format metal 3D printing.

3D printing 81

3D printing Robotics Robotics Form 81

Manufacturer's Monthly

NOVEMBER 14, 2023

What sets the deployable metal 3D printers apart is it’s unique proprietary and patented cold spray additive manufacturing (CSAM) technology. Unlike traditional 3D printing techniques, rather than using heat or lasers to melt metal powders, SPEE3D developed ‘Supersonic 3D Deposition’.

3D printing 96

3D printing Form Additive manufacturing Robotics 96

Design World

NOVEMBER 18, 2024

Under the motto “Let’s advance Manufacturing,” Siemens and selected partners will demonstrate at Formnext 2024 how additive manufacturing (AM) is becoming an innovation enabler for industrial applications thanks to a functioning ecosystem, digitalization, and automation.

Additive manufacturing 130

Additive manufacturing Manufacturing Advanced manufacturing Function 130

Robotics Automation News

MARCH 28, 2024

Advanced Robotics, and Meltio, a disruptive laser metal deposition technology manufacturer, have agreed a partnership within which Advanced Robotics is going to play a key role in the distribution and support of the Meltio metal 3D printing solutions in the Italian market, as an official sales partner.

3D printing 69

3D printing Additive manufacturing Robotics Robotics 69

Additive Manufacturing

SEPTEMBER 16, 2022

While many focus on gene therapies, 3D printing is not only more accessible, but has shown that is an enabler for personalization and can make a significant impact on patient care. These multi-functional devices can rely on embedded or printed electronics or smart materials.

Additive manufacturing 75

Additive manufacturing 3D printing Manufacturing Electronics 75

AU Manufacturing

FEBRUARY 22, 2023

Engineers at the Massachusetts Institute of Technology have devised a method for 3D printing a soft and flexible replica of a patient’s heart in the hopes of helping doctors tailor treatments to patients’ specific heart form and function.

3D printing 88

3D printing Function Form Robotics 88

AU Manufacturing

FEBRUARY 20, 2023

Advanced Robotics for Manufacturing Hub has collaborated with various organisations to provide its expertise in design, additive manufacturing , and robotics for the Spinal Life Australia (SLA) project in an effort to increase remote care solutions for people with disability.

Additive manufacturing 77

Additive manufacturing 3D printing Manufacturing Supply Chain 77

Fabricating & Metal Work

DECEMBER 7, 2024

an innovative metal 3D printing company, is pleased to announce the successful closure of an additional $2 million in their Seed+ funding, bringing the total raised in the financing round to $5 million. “We are helping our customers print designs using our robotic welding process expertise that were previously impossible.

3D printing 52

3D printing Additive manufacturing Robotics Robotics 52

Additive Manufacturing

JULY 20, 2022

From initial use as a prototyping tool to additive manufacturing’s role as an enabler for electrification, mobility, and more, the automotive industry is accelerating additive manufacturing. Indirect manufacturing like jigs, fixtures, robots, etc., Is additive manufacturing renewing this interest?

Additive manufacturing 98

Additive manufacturing Automotive Manufacturing Prototype  98

Additive Manufacturing

DECEMBER 15, 2022

The additive manufacturing (AM) industry is growing rapidly, yet the industry is facing a global shortage of workers. Manufacturing requires people, regardless of a company’s size, industry, or adoption of advanced technologies like robots, automation, and artificial intelligence.

Additive manufacturing 98

Additive manufacturing Manufacturing 3D printing Form 98

Mold Making Technology

APRIL 3, 2024

Once relegated to rapid prototyping, 3D printing technology has now advanced far beyond the design studio. At NPE 2024: The Plastics Show , 3D printing and additive manufacturing (AM) suppliers will be highlighted in the Advanced Manufacturing Zone , while AM users will take to the stage for Wednesday’s 3D Printing Workshop.

3D printing 64

3D printing Prototype  Rapid prototyping Supply Chain 64

Manufacturer's Monthly

AUGUST 2, 2023

As the director of CSIRO’s Lab 22, Australia’s centre for additive innovation, I have witnessed the rapid and impressive growth of the additive manufacturing (AM) industry. Of note is the expansion in the capabilities of larger format printers – particularly those leveraging robotic techniques.

Additive manufacturing 94

Additive manufacturing Manufacturing Supply Chain Prototype  94

Metrology

SEPTEMBER 3, 2024

Introducing its robotic large format additive manufacturing (LFAM) platform for the first time at a major US manufacturing tradeshow, Caracol, will showcase its advanced technology at IMTS, Chicago, on Sept.

Additive manufacturing 52

Additive manufacturing 3D printing Robotics Robotics 52

Metrology

MAY 30, 2024

Additive manufacturing processes have been used on a daily basis for a long time at BMW Group Plant Landshut. For many years, these have included moulds for the manufacturing of aluminium cylinder heads, which are printed three-dimensionally using the sand casting process.

3D printing 52

3D printing Robotics Robotics Additive manufacturing 52

Automation World

APRIL 20, 2023

Additive manufacturing, artificial intelligence and collaborative robots are changing every aspect of the manufacturing industries—from product design and production to supply chain strategies.

Artificial Intelligence 188

Artificial Intelligence Supply Chain Manufacturing Additive manufacturing 188

Additive Manufacturing

MARCH 3, 2023

Barlassina (MB), March 3, 2023: Caracol, leader in industrial large format 3D printing, closes a €10.6 It affirms both the company’s leading role and the relevance of its technological solution Heron AM, the large format additive manufacturing platform, setting the grounds for an international expansion.

3D printing 95

3D printing Additive manufacturing Aerospace Industry 4.0 95

Fabricating & Metal Work

FEBRUARY 9, 2024

The new One Off Robotics Cell powered by Meltio, and made in the USA, uses standard welding wire and produces parts that are consistent, spatter-free and clean. One Off Robotics and Meltio are teaming up to develop a breakthrough, ready-to-use additive manufacturing work cell.

Additive manufacturing 52

Additive manufacturing 3D printing Robotics Robotics 52

Mold Making Technology

OCTOBER 5, 2023

Meltio Space robot slicer employs a virtual model of the real robot movement. Photo Credit: Meltio Meltio created the Meltio Space toolpath generator to facilitate the use of its metal 3D printing solutions. Meltio Space includes preset and recommended material profiles and 3D printing parameters.

3D printing 52

3D printing Robotics Robotics Additive manufacturing 52

Additive Manufacturing

SEPTEMBER 22, 2022

A panel of distinguished experts discussed the current state of personalized surgery, robotics, 3D printing, medical simulation, and the ongoing potential for it. Patel recalls when he started using 3D printed, patient-specific anatomical models for pre-surgical preparation. Where Do Robotics Fit In?

3D printing 52

3D printing Robotics Robotics Fit 52

Metrology

SEPTEMBER 28, 2023

Meltio has launched the Meltio Robot Cell, a turn-key metal 3D printing solution to boost the performance of industrial robotic arms in a safer, more reliable, and highly accurate way by controlling the entire process.

3D printing 52

3D printing Robotics Robotics Additive manufacturing 52

Mold Making Technology

MARCH 19, 2024

Over the last few years, a focus on “next-generation” technologies has permeated the manufacturing industry — particularly regarding 3D printing and mold materials complementary to this process. The processes and technologies used to produce these molds are also just as pivotal.

3D printing 59

3D printing Sourcing Additive manufacturing Robotics 59

Modern Machine Shop

NOVEMBER 11, 2024

Jump to: Photos | Related Resources | Transcript Additive manufacturing and robots both enable manufacturing, but they also enable one another. Listen to the podcast above and visit Additive Manufacturing’s website to find photos, show notes and the episode transcript.

3D printing 40

3D printing Robotics Robotics Additive manufacturing 40

AU Manufacturing

MARCH 15, 2023

In particular, the engineers created a system called MechSense that enables a maker to use conductive 3D printing filament to 3D-print sensors directly into a mechanism’s moving elements. 3D printing is a tool that a lot of people can afford to have in their homes.

3D printing 65

3D printing Rapid prototyping Prototype  Robotics 65

Additive Manufacturing

JULY 28, 2022

Combining cutting-edge technology with additive manufacturing redefines the limits set within traditional manufacturing and delivers innovation in places you might not expect. Additive manufacturing (AM), more commonly known as 3D printing, is an innovative process where objects are created one layer at a time.

3D printing 98

3D printing Additive manufacturing Cycle time Supply Chain 98

Additive Manufacturing

JANUARY 5, 2023

As the community finds more applications, improves processes, and looks for new technology, solution providers are working to support additive manufacturing growth through collaboration, investment, and funding. The funds will be used for process and material development of additive manufacturing of RF (radio frequency) devices.

Additive manufacturing 59

Additive manufacturing 3D printing Manufacturing Digital manufacturing 59

MESA

MAY 26, 2023

The project call is also seeking innovative solutions for robotic AM process planning for continuous fiber-reinforced composite structures. “We America Makes strives to accelerate the development and deployment of innovative, cost-effective, energy-efficient AM and 3D printed (3DP) technologies to meet defense and/or commercial needs.

3D printing 130

3D printing Supply Chain Composites Additive manufacturing 130

Additive Manufacturing

MARCH 8, 2023

The relocation and expansion of El Cosmico to 62 acres will showcase entirely new architectural approaches made possible by large-scale 3D-printing including domes, arches, vaults and parabolic forms. “I ICON’s technology excels at creating soft shapes and curved surfaces, making it possible to bring this design vision to life.

3D printing 64

3D printing Form Fit Additive manufacturing 64

i4.0 today

JANUARY 22, 2024

3D printing is a digital manufacturing technology, meaning that a large part of the production process is managed online. However, finishing the printed components still has some manual process steps. As its name implies, additive manufacturing adds material to create an object.

3D printing 52

3D printing Computer-Aided Design (CAD) Additive manufacturing Rapid prototyping 52

Gary Mintchell

MAY 20, 2024

Festo Didactic incorporated into this demo its 360-degree robotic safety awareness package developed in partnership with SICK. The post Automate Report 4: Festo Introduces Several New Products appeared first on The Manufacturing Connection.

Automation 147

Automation 3D printing Cycle time Additive manufacturing 147

Robotics Automation News

NOVEMBER 14, 2024

SLM stands for “selective laser melting”, a technique for 3D printing or additive manufacturing.) Nikon SLM Solutions says that the 1000th system it has produced, an NXG XII 600, has now been acquired – by Bosch.

3D printing 105

3D printing Additive manufacturing Manufacturing 105

Manufacturer's Monthly

JULY 11, 2023

Author: Geoff Crittenden, CEO, Weld Australia But, with the advent of automation, robots, cobots and a range of other advanced welding technologies and techniques, this perception is becoming more and more outdated. robots and cobots Automation, Industry 4.0, Welding is a far less dangerous and arduous job than ever before. Industry 4.0

3D printing 94

3D printing Industry 4.0 Industry 4.0 Robotics 94

Modern Machine Shop

MAY 12, 2024

Now, APG’s sister company uses 3D printed jaws more optimized to this process. One of the first applications the company found for metal 3D printing has proven to be a valuable business opportunity, both for serving internal needs of its sister machining business and now, those of outside customers as well.

3D printing 52

3D printing Cycle time Form Additive manufacturing 52

Dinesh Mishra

JULY 25, 2022

CEMEX and COBOD have been working together over the last year to innovate in the 3D printing space. Through this partnership, they recently introduced a 3D printing solution that utilizes conventional ready-mix concrete in the building process. COBOD 3D printed Europe’s first building in 2017. About COBOD.

3D printing 52

3D printing Value chain Robotics Robotics 52

Manufacturer's Monthly

NOVEMBER 2, 2022

3D Systems has acquired Titan Additive LLC (Titan Robotics), the Colorado-based designer and fabricator of large-format, industrial 3D printers.

3D printing 97

3D printing Robotics Robotics Form 97

Additive Manufacturing

MAY 22, 2023

Carbon County, Utah – May 22, 2023 – Merit3D was one of many recipients of the Utah Manufacturing Modernization Grant which aimed to bring manufacturing back home to the US, and more specifically, to Utah. This grant enabled what could be the largest order of 3D printed parts.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Supply Chain 52

Additive Manufacturing

DECEMBER 11, 2022

The $2M round will be used to scale manufacturing capacity, grow the company and accelerate its go-to-market strategy focused on large format metal 3D printing. AM Ventures’ portfolio includes an elite group of 17 companies engaged in 3D printing, out of over 2,400 start-ups evaluated.

3D printing 52

3D printing Aerospace Additive manufacturing Supply Chain 52