Canadian Manufacturing

JULY 18, 2024

assembly plant starting in 2026, adding capacity of up to 100,000 additional units. billion to transform the Oakville site into a hub for electric vehicle manufacturing. Ford Motor Co. says it plans to assemble its F-Series Super Duty pickup trucks at its Oakville, Ont.,

Manufacturing 64

Manufacturing Supply Chain Automotive 64

Manufacturer's Monthly

SEPTEMBER 15, 2022

Energy Storage Industries – Asia Pacific (ESI) , an Australian-owned renewable energy company, has broken ground on a new $70 million battery manufacturing centre in Maryborough, Queensland. The post Battery manufacturing facility to boost QLD energy potential appeared first on Manufacturers' Monthly.

Manufacturing 98

Manufacturing Supply Chain Form Sourcing 98

Frost & Sullivan Manufacturing

JULY 28, 2022

San Antonio –July 28, 2022– The increasing complexity of global supply chains across industries, such as unreported process delays and late deliveries, necessitates shippers to have real-time visibility into the status of their freight. As a result, the global supply chain management platform market will likely reach $32.31

Freight 52

Freight Supply Chain Logistics Function 52

Dinesh Mishra

AUGUST 4, 2022

IPC India, a part of the global not-for-profit association established in the USA in 1957 represents all facets of the electronics manufacturing industry, the Integrated Electronics Manufacturing & Interconnections (IEMI) event in India. and India should interest major manufacturers from the industry.

Electronics 98

Electronics Manufacturing Supply Chain Automotive 98

Manufacturer's Monthly

JANUARY 16, 2023

Construction will begin in the second half of 2023, with the goal of producing batteries equal to 2 GWh annually in the second half of 2024 and 6 GWh by 2026. Accenture will work closely with Recharge Industries to adapt C4V’s IP to the conditions and requirements of the Geelong manufacturing plant. Scale Facilitation CEO, David A.

Supply Chain 111

Supply Chain Advanced manufacturing Manufacturing 111

Canadian Manufacturing

JULY 28, 2022

SAN ANTONIO — The increasing complexity of global supply chains across industries, such as unreported process delays and late deliveries, necessitates shippers to have real-time visibility into the status of their freight. As a result, the global supply chain management platform market will likely reach $32.31

Freight 52

Freight Supply Chain Logistics Function 52

Frost & Sullivan Manufacturing

NOVEMBER 7, 2024

This unprecedented decision forms part of a larger plan to save €10 billion by 2026. Compounding these challenges is the heightened competition from Chinese EV manufacturers, who have gained traction in both Chinese and European markets by offering competitively priced models.

Automotive 52

Automotive Supply Chain Form Manufacturing 52

Manufacturer's Monthly

AUGUST 19, 2024

Members of the disability sector, train passengers, train drivers and bike users have had a chance to inspect the mock-up of the new Queensland Train Manufacturing Program (QTMP) trains. QTMP will build 65 six-car passenger trains at a purpose-built manufacturing facility at Torbanlea in the Fraser Coast region.

Supply Chain 97

Supply Chain Function Manufacturing 97

Canadian Manufacturing

JUNE 13, 2023

300mm Fab Equipment Spending MILPITAS — Global 300mm fab equipment spending for front-end facilities next year is expected to begin a growth streak to a US$119 billion record high in 2026 following a decline in 2023, SEMI highlighted on Jun. 13 in its quarterly 300mm Fab Outlook Report to 2026. billion in 2026.

Automotive 59

Automotive Supply Chain Advanced manufacturing Electronics 59

Manufacturer's Monthly

JUNE 23, 2024

metre, steel-hull patrol boats are to be constructed at Henderson in Western Australia and are scheduled for delivery in 2026. These vessels were designed and constructed by our team here in Western Australia, with the support of our highly capable supply chain partners,” said Gregg. “We

Supply Chain 104

Supply Chain Manufacturing 104

Manufacturer's Monthly

OCTOBER 15, 2023

Chief Minister Natasha Fyles spoke in more detail about the awards and the importance of the manufacturing industry in the Northern Territory. This year’s awards include education, manufacturing, agribusiness, sustainability, emerging and regional exporter. The National Export Awards ceremony is to be held in Canberra on 30 November.

Beverage 105

Beverage Supply Chain Manufacturing Composites 105

Canadian Manufacturing

MARCH 28, 2023

Total 300mm Fab Capacity MILPITAS — Semiconductor manufacturers worldwide are forecast to increase 300mm fab capacity to an all-time high of 9.6 million wafers per month (wpm) in 2026, SEMI said in its 300mm Fab Outlook to 2026 report. The companies are planning 82 new facilities and lines to start operations from 2023 to 2026.

Automotive 52

Automotive Supply Chain Manufacturing 52

AU Manufacturing

FEBRUARY 6, 2023

The Queensland government has named engineering firm Downer as the preferred supplier to build and deliver 65 next-generation trains as part of the Queensland Train Manufacturing Program. Treasurer and minister for trade and investment Cameron Dick said the decision highlighted the manufacturing capability of regional Queensland.

Manufacturing 75

Manufacturing Supply Chain 75

AU Manufacturing

MAY 21, 2023

CSL Seqirus has reached a major milestone in the construction of its new cutting-edge manufacturing facility for vaccine and antivenom manufacturing. The manufacturing facility will have CSL Seqirus vaccine adjuvant technology (MFS59) to manufacture seasonal and pandemic cell-based influenza vaccines.

Manufacturing 81

Manufacturing Supply Chain Automation 81

Manufacturer's Monthly

MAY 21, 2023

CSL Seqirus has announced that construction of its new state-of-the-art vaccine and anti-venom manufacturing facility in Tullamarine has reached its highest point, known as ‘topping out’. This is also one of the first local manufacturing facilities to pursue 5 star ‘Green Star’ and Gold WELL certification.

Manufacturing 97

Manufacturing Form Supply Chain Automation 97

Canadian Manufacturing

OCTOBER 2, 2024

beverage manufacturing network. million over an estimated two-year period for the construction of a new beverage manufacturing facility in New Jersey, on a site adjacent to the Corporation’s existing plant. ROUGEMONT — Lassonde Industries Inc. The program mainly consists in the investment of approximately US$200.0

Beverage 98

Beverage Supply Chain Logistics Sourcing 98

Manufacturer's Monthly

APRIL 11, 2024

“Deliveries are scheduled to start in 2025 with the first Australian-built vehicle to be delivered in 2026,” said Poyner. According to the Australian Defence, this contract will secure 600 direct jobs in Queensland, in addition to the economic opportunities that will flow through the defence supply chain.

Supply Chain 111

Supply Chain Advanced manufacturing Manufacturing 111

AU Manufacturing

OCTOBER 9, 2022

This year’s categories included small business, agribusiness, resources, manufacturing, professional services and regional exporter, with the winners being: Alana Kaye Group – Northern Territory Exporter of the Year 2022 and International Education and Training. Australian Blue Cypress – Manufacturing and Advanced Materials.

Beverage 97

Beverage Supply Chain Manufacturing 97

Manufacturer's Monthly

MAY 30, 2024

The hub will initially deliver approximately 55 megawatts of electrolyser capacity by 2026, to scale up to over 1 gigawatt of capacity over the next decade. The development will support the hydrogen industry in NSW by establishing a commercial-scale green hydrogen supply chain and a hydrogen refuelling network for the Hunter Region and NSW.

Supply Chain 97

Supply Chain Sourcing Manufacturing 97

Manufacturer's Monthly

SEPTEMBER 15, 2024

The tender process will commence in early 2025 with both centres on track for delivery in 2026. Renewable hydrogen has the potential to help the state decarbonise energy intensive manufacturing and industrial sectors that are critical to supply chains for housing and construction.

Supply Chain 94

Supply Chain Manufacturing 94

AU Manufacturing

APRIL 10, 2023

Australia-based Arafura Rare Earths Ltd has struck a five-year offtake agreement with wind turbine manufacturer Siemens Gamesa Renewable Energy, supplying 200 tonnes per annum (tpa) of key elements neodymium and praseodymium (NdPr) from the Nolans project in the Northern Territory.

Manufacturing 71

Manufacturing Supply Chain 71

E&T

SEPTEMBER 13, 2023

HS2 trains were originally scheduled to run in 2026, but they are now not expected to run into Euston until 2041 at the earliest. The off-site manufacturing techniques being used will help cut the overall amount of carbon-intensive concrete and steel in the tunnel, and help spread the supply-chain benefits of the project across the UK.”

Supply Chain 105

Supply Chain Sourcing Manufacturing 105

AU Manufacturing

JANUARY 16, 2023

Construction will commence in the second half of 2023 to produce 2 GWh of batteries per year by the second half of 2024 and 6 GWh by 2026. C4V offers proven Intellectual Property (IP), a qualified supply chain, blueprints, and technology concepts for battery manufacture, all of which help to speed up planning, engineering, and construction.

Supply Chain 78

Supply Chain Advanced manufacturing Manufacturing 78

Control Engineering

FEBRUARY 2, 2023

Market Insights Machinery sector growth outperformed manufacturing in 2022. London, 31 st January 2023 – Updated research by Interact Analysis shows that Asia Pacific (APAC), Europe and the US have performed very differently in terms of manufacturing output growth during 2022. Americas region to grow by 3.1% for Europe.

Manufacturing 52

Manufacturing Supply Chain Value chain Pharmaceutical 52

Mold Making Technology

NOVEMBER 15, 2022

Furthermore, the Detroit Three automakers, who source most of their tools in this region, are planning to source tooling for all new full-sized pickup trucks and SUVs in 2024/2025 and 2026, which significantly increases the tooling demand.

Supply Chain 104

Supply Chain Automotive Sourcing Manufacturing 104

Manufacturer's Monthly

JANUARY 11, 2023

A new agreement will see Element 25 supply battery-grade, high-purity manganese sulphate monohydrate to global automaker Stellantis for use in electric vehicle (EV) battery packs. The five-year agreement calls for shipments to begin in 2026, a total volume of 45 kilotons, and options to extend the supply term and volumes.

Supply Chain 98

Supply Chain Sourcing Manufacturing 98

E&T

JANUARY 5, 2023

Mizuno said Afeela hoped to begin sales of the car in 2025, with those first vehicles delivered to North America by spring 2026. The front of the car also includes a Media Bar, which the tech giant said could be used to share information with people around the electric vehicle, including warnings and charging details.

Prototype  117

Prototype  Supply Chain Automotive Manufacturing 117

SMMT

APRIL 24, 2024

in March, as manufacturers gear up to make new models, rounding off first quarter with volumes still up 1.1%. Sector calls for improved UK competitiveness, especially on energy, trade and skills to attract further investment and drive the decarbonisation of manufacturing. British car production falls -27.1% respectively.

Supply Chain 87

Supply Chain Automotive Manufacturing 87

i4.0 today

JANUARY 16, 2025

Infineon Technologies AG (FSE: IFX / OTCQX: IFNNY)has broken ground for a new semiconductor backend production site in Samut Prakan, south of Bangkok, optimizing and further diversifying its manufacturing footprint. The first building is planned to be ready for operations at the beginning of 2026. Today Magazine.

Manufacturing 52

Manufacturing Supply Chain Electronics Value chain 52

Control Engineering

AUGUST 3, 2022

The motion control market is experiencing strong growth, particularly in Asia-Pacific, as a mix of strong demand and supply chain constraints are giving suppliers a lot of leverage when it comes to prices. It may have an impact on growth, but more from a supply side. Interact Analysis research indicates strong the 21.6%

Supply Chain 52

Supply Chain Automation Robotics Robotics 52

Canadian Manufacturing

JANUARY 3, 2025

Work on the expansion is set to begin immediately for completion by the first quarter of 2026. Richardson is proud to have one of the most efficient oat supply chains in North America from origination to the manufacture of finished products. This expansion is the next chapter in our continued evolution.

Supply Chain 52

Supply Chain Automation Manufacturing Food Production 52

AU Manufacturing

JUNE 6, 2023

Battery materials and technology company NOVONIX has signed a joint research and development agreement (JDA) with global manufacturer LG Energy Solution for the development of artificial graphite anode material for lithium-ion batteries. The material will be developed at NOVONIX’s existing facilities in Tennessee.

Energy Solutions 59

Energy Solutions Supply Chain Compliance Sourcing 59

E&T

SEPTEMBER 20, 2022

According to the organisation's forecasts, 25,000 additional workers are needed for major projects, including those related to net zero, by 2026. This is closely followed by production and manufacturing on 79 per cent, logistics on 79 per cent and hospitality on 78 per cent.

Logistics 89

Logistics Supply Chain Manufacturing 89

Canadian Manufacturing

APRIL 26, 2024

“By leveling the playing field for local businesses, the government is supporting Ontario-made products and innovations that will promote economic growth, create new jobs and secure the province’s supply chain.” The government anticipates that at least $3 billion in contracts will be awarded to Ontario businesses through to 2026.

Supply Chain 52

Supply Chain Compliance Manufacturing 52

Canadian Manufacturing

APRIL 17, 2023

In addition to manufacturing, Magna will also be responsible for the engineering of the complete vehicle. In addition to manufacturing, Magna will also be responsible for the engineering of the complete vehicle. “We

Automotive 52

Automotive Manufacturing Supply Chain 52

E&T

MAY 22, 2023

A multiplier effect is that allied industries such as software development, e-commerce and logistics-supply chain-vendors could also benefit from the budgetary allocation for IT hardware. This by itself has created a domestic demand for the local manufacturing and supply of IT hardware products and services.

Electronics 59

Electronics Supply Chain Benchmarking Logistics 59

Canadian Manufacturing

APRIL 18, 2023

has agreed to acquire the controlling interest in SG Technologies Group Limited, one of Europe’s specialty manufacturers of rare-earth-based and other high-performance magnets for industrial and commercial markets. USD) based on Adjusted EBITDA performance over the SGTec’s fiscal years 2024 through 2026. GBP ($13.4M

Manufacturing 40

Manufacturing Supply Chain Electronics 40