Robotics Business Review

SEPTEMBER 24, 2024

It expects growth to accelerate in 2025 and continue in 2026 and 2027. Demand from the automotive industry soared to 3,551 units, an increase of 139%. Investment was driven by installations in the automotive industry, mainly for assembly tasks. electrical/electronics industry remained steady at 3,900 units (+1%).

Robotics 122

Robotics Robotics Automotive Sourcing 122

Canadian Manufacturing

SEPTEMBER 26, 2024

billion in 2026 followed by a 3 per cent increase to US$140.8 “The world’s ubiquitous need for chips is boosting spending on equipment for both leading-edge technologies addressing AI applications and mature technologies driven by automotive and IoT applications.” billion in 2025, surpassing the US$100 billion level.

Artificial Intelligence 93

Artificial Intelligence Automotive Electronics Supply Chain 93

Frost & Sullivan Manufacturing

DECEMBER 19, 2022

The “Apple” car intended to mark the tech giant’s big, splashy entry into the automotive industry will now debut only in 2026, with initial plans to equip it with fully autonomous driving capabilities abandoned for a simpler self-driving system. Our Perspective. appeared first on Frost & Sullivan.

Automotive 52

Automotive Value chain Electronics Manufacturing 52

Frost & Sullivan Manufacturing

FEBRUARY 5, 2024

Highlights of flagship automotive aftermarket trade event include more than 500 exhibitors, 1000 brands,1500 product categories, and strong domestic, regional, and international representation amidst focus on mobility ecosystem development and growth acceleration. lakh registered visitors. lakh registered visitors. Roger Motors Pvt Ltd.,

Automotive 59

Automotive Manufacturing Sourcing Value chain 59

Control Engineering

SEPTEMBER 30, 2022

Semiconductor and electronics machinery growth forecast at 6.2% Semiconductor and electronics machinery bucked the trend, and is forecast for 6.2% Japan is the largest single supplier of semiconductor and electronics machinery, accounting for 30% of the total market, with China at 23%, the US at 10% and The Netherlands at 7%.

Manufacturing 72

Manufacturing Electronics Automotive 72

Robotics Business Review

NOVEMBER 6, 2024

” of 25 robots, which CynLr plans to expand to more than 50 systems by 2026. The center will work closely with CynLr’s research partners in EPFL (the Swiss Federal Institute of Technology Lausanne) Learning Algorithms and Systems (LASA) Laboratory and the Swiss Center for Electronics and Microtechnology (CSEM) in Neuchâtel.

Robotics 65

Robotics Robotics Bottleneck Sourcing 65

Canadian Manufacturing

APRIL 28, 2025

Production part approval process (PPAP) products are scheduled for the first half of 2026, with mass production to start later in that year. The EV traction motor grade magnet samples will be assembled into traction motors for performance testing by the Tier 1 customer and OEM.

Electronics 52

Electronics Automotive Manufacturing 52

Automation Mag

SEPTEMBER 24, 2024

Installation figures in Canada largely depend on automotive investment cycles. Demand from the automotive industry fell by 15 percent to 12,421 units. Installations in the US electrical/electronics industry remained steady at 3,900 units (up one percent). Growth is expected to accelerate in 2025 and continue in 2026 and 2027.

Robotics 64

Robotics Robotics Automotive Electronics 64

i4.0 today

MAY 23, 2023

Research and innovation in pacemaker technologies such as power electronics are crucial catalysts in the implementation of the Green Deal. The results strengthen manufacturing in mechanical engineering, semiconductors, electronics as well as in the automotive industry and create resilient supply chains in Europe.

Artificial Intelligence 52

Artificial Intelligence Electronics Supply Chain Value chain 52

Fabricating & Metal Work

NOVEMBER 12, 2024

Toby Maconachie, additive manufacturing engineer for PWR, with an automotive heat exchanger 3D printed on a Velo3D additive manufacturing system using the new CP1 aluminum alloy material. We worked closely with Velo3D on qualifying the material for production and now CP1 is all that we print these days.”

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

Canadian Manufacturing

SEPTEMBER 25, 2024

This development aims to provide a user-centred vehicle environment, enhancing the connectivity of the infotainment system set to be unveiled in 2026. Hyundai Motor and Kia are working on a next-generation infotainment system and an open mobility ecosystem, in collaboration with Hyundai Motor Group’s global software centre, 42dot.

Electronics 52

Electronics Automotive Manufacturing 52

Canadian Manufacturing

MARCH 19, 2024

MILPITAS — Global 300mm fab equipment spending for front-end facilities is forecasted to reach a record US$137 billion in 2027 after topping US$100 billion for the first time by 2025 on the strength of the memory market recovery and strong demand for high-performance computing and automotive applications, SEMI highlighted on Mar.

Artificial Intelligence 52

Artificial Intelligence Electronics Automotive Manufacturing 52

Frost & Sullivan Manufacturing

JANUARY 11, 2023

The marquee Consumer Electronic Show (CES) 2023 – the “most influential tech event in the world” – was back in full strength this year. Held from January 5-8th in Las Vegas, US, it featured all the heavy hitters from the consumer electronics and automotive industry. Tech and Automotive Get Closer.

Automotive 52

Automotive Electronics Prototype  Manufacturing 52

Plastics News

AUGUST 4, 2023

DSG-Canusa also makes accessories for electrical/electronics, energy, communications and automotive markets. This new site will also house Kanata Electronic Services Ltd., The new plants are designed to expand production in Mattr's Connection Technologies segment (formerly the Automotive and Industrial segment).

Composites 52

Composites Electronics Automotive Aerospace 52

Frost & Sullivan Manufacturing

DECEMBER 5, 2023

Multiple advantages underpin emergence of Silicon carbide (SiC) and Gallium-nitride (GaN) WBG semiconductor technologies as the future of electric vehicle power electronics. They are seen which are seen as critical to the future of EV power electronics.

Automotive 52

Automotive Supply Chain Electronics Manufacturing 52

i4.0 today

DECEMBER 5, 2024

Ampere and STMicroelectronics worked together on the optimization of the power module, the key element in the powerbox, to get the highest performance and best competitiveness in the e-powertrain, leveraging Ampere’s expertise in EV technology and STMicroelectronics’ expertise in advanced power electronics.

Electronics 52

Electronics Supply Chain Value chain Manufacturing 52

i4.0 today

FEBRUARY 24, 2025

The Fab opening is planned for 2026. “ We are increasing semiconductor capacity in Europe and thus helping secure stable supply chains in automotive, security and industrial fields.” The total funding for the Dresden site amounts to around one billion euros. Construction began in March 2023 and is progressing successfully.

Artificial Intelligence 52

Artificial Intelligence Supply Chain Electronics Automotive 52

21st Century Tech

MARCH 21, 2023

It is in Rocket Lab’s Electron rocket. It is found in high-end electronics like smartphones to keep them light and durable. The earlier project start date would be September 1, 2023, with a completion date on August 31, 2026. As a sheet, it can be moulded and turned into body parts for automobiles and trucks.

Prototype  79

Prototype  Electronics Sourcing Manufacturing 79

Ionthis

JANUARY 16, 2021

billion by the end of 2026, it’s clear that this process has new applications that are being discovered each day. Read on to learn some basic custom sheet metal fabrication applications and get more insight into how sheet metal fabrication can be best used in the electronics industry. Sheet Metal Fabrication in Electronics.

Electronics 52

Electronics Prototype  3D printing Robotics 52

Additive Manufacturing

SEPTEMBER 4, 2022

SLM’s CEO Sam O’Leary commented: “Nikon has more than a century of history in developing cutting-edge opto-electronic technology and precision equipment. per each convertible bond issued by SLM on 15 July 2020 in the amount of EUR 14,688,000.00, with ISIN DE000A289N86 (the “Convertible Bonds 2020/2026”), (ii) EUR 2,580.00

3D printing 52

3D printing Additive manufacturing Digital manufacturing Aerospace 52

Frost & Sullivan Manufacturing

FEBRUARY 8, 2024

What do you see as some of the general trends in the Indian automotive industry? The global automotive industry has undergone significant transformation, with this process starting around 2018-2019. We see a lot of body electronics getting changed. For the global automotive industry, the key factor will be the migration to SDV.

Automotive 52

Automotive Function Automation Electronics 52

Frost & Sullivan Manufacturing

JANUARY 30, 2024

Increasingly stringent vehicle safety mandates and consumer demand for additional safety features challenge automakers as they seek to develop cost-effective, value-added safety offerings, while maintaining profitability and market share in India’s highly competitive automotive industry. By 2026, all OEMs will offer ESP as a standard.

Compliance 52

Compliance Automotive Electronics 52

Frost & Sullivan Manufacturing

JANUARY 10, 2024

Brakes India is a leading automotive component supplier both to the domestic Indian market and to global markets. How has the automotive and the allied auto components sector, both in India and globally, transformed over the last couple of years? For India, the rapidly growing auto market is expected to reach $300 billion by 2026.

Automotive 52

Automotive Supply Chain Manufacturing Logistics 52

Frost & Sullivan Manufacturing

JANUARY 1, 2024

Both government and the automotive industry have established hydrogen roadmaps, even as they focus on overcoming challenges related to high production and maintenance costs, nascent supply chains, as well as inadequate refueling infrastructure. of global passenger sales by 2030.

Supply Chain 52

Supply Chain Electronics Automotive Manufacturing 52

i4.0 today

MAY 3, 2023

Analog/mixed-signal components are used in power supply systems, for example in energy-efficient charging systems, small automotive motor control units, in data centers and in applications for the Internet of Things (IoT). Manufacturing activities are planned to begin in fall 2026.

Electronics 52

Electronics Automotive Manufacturing Automation 52

i4.0 today

FEBRUARY 12, 2025

Photonic Integrated Circuits (PICs) are tiny optical systems manufactured with technology used in the electronic integrated circuit industry. The biggest driver of the development of PIC transceivers is AI, as higher-performance AI accelerators will require higher-performance transceivers, with 3.2Tbps transceivers expected to arrive by 2026.

Sourcing 52

Sourcing Artificial Intelligence Electronics Benchmarking 52

Fabricating & Metal Work

OCTOBER 2, 2023

Replacing the existing robotics facilities at the site, the new Campus is planned to open in late 2026. Our Robotics Campus will help us to serve our customers more efficiently and support new and existing sectors like automotive, electronics, logistics, healthcare, e-commerce and pharmaceuticals to unlock the full potential of automation.”

Robotics 52

Robotics Robotics Automation Pharmaceutical 52

Canadian Manufacturing

AUGUST 28, 2024

The Independent Electricity System Operator (IESO) is responsible for creating a procurement design framework by September 20, 2024, and concluding the procurement by February 28, 2026. The procurement process is intended to be transparent, competitive, and cost-effective, covering various energy technologies.

Sourcing 52

Sourcing Manufacturing Electronics Automotive 52

i4.0 today

OCTOBER 18, 2022

The 7-billion-HUF investment to set up Toyo Ink Hungary is part of a long-term business plan of the Toyo Ink Group, in which approximately 10 billion JPY will be invested up to 2026 to strengthen its global CNT dispersions production network and to ensure a reliable global supply. “ For more information, see schd.toyoinkgroup.com/en/.

Function 52

Function Electronics Manufacturing Industry 4.0 52

Automation Mag

APRIL 25, 2024

Industrial connectivity IOT Analytics reports “by 2026, more than 50 percent of all products sold by original equipment manufacturers (OEMs) will be IoT connected” and “the number one benefit of connected IoT projects is generating deep insights into customer usage of their products and services (67 percent).”

Automation 59

Automation Supply Chain Manufacturing Robotics 59

AU Manufacturing

JANUARY 5, 2023

Overall, the company plans to invest three billion euros in its semiconductor business, and thus also in sensor development and manufacturing, by 2026 as part of its investment plan. MEMS sensors first went into widespread use in the automotive industry. But MEMS sensors also play a central role in consumer electronics.

Fit 52

Fit Automation Manufacturing Electronics 52

Canadian Manufacturing

SEPTEMBER 17, 2024

The plant was previously expected to begin production in 2026 and create around 600 jobs. The American automaker now says it will produce 100,000 gas-powered Super Duty trucks at the plant, starting in 2026. Ford Motors Co. has opted to delay its production of electric SUVs at an Oakville, Ont., assembly plant from next year to 2027.

Supply Chain 40

Supply Chain Advanced manufacturing Manufacturing Compliance 40

Plastics News

JANUARY 27, 2023

Construction will begin immediately on the project, with operations expected to begin in 2026. The automotive sector is a big end market for many engineering resins. Demand from appliances and electrical/electronics — two other significant engineering resin markets — is expected to be down slightly in the quarter, the source added.

Sourcing 40

Sourcing Freight Beverage Logistics 40

i4.0 today

AUGUST 4, 2022

Combining the extensive experience in automotive digital cockpit design of ECARX with AMD advanced computing power and stunning visual graphic rendering capabilities, the companies aim to deliver an innovative in-car experience. “As About AMD Ryzen Embedded V2000 Processors. About AMD Ryzen Embedded V2000 Processors.

Automotive 52

Automotive Industry 4.0 Industry 4.0 Manufacturing 52

i4.0 today

AUGUST 17, 2022

To learn more, the new IDTechEx report, “ Electric Cars 2023-2043 “, provides a deep dive into future automotive markets with granular forecasts. In addition, new emissions standards are to be introduced from 2023: average carbon emissions from cars and light trucks will decline from ~224g CO2 per km to ~161g CO2 per km in 2026.

Electronics 52

Electronics Automotive Sourcing Industry 4.0 52

Frost & Sullivan Manufacturing

SEPTEMBER 14, 2022

To add to the annus horribilis that was 2020, supply chain disruptions and global semiconductor shortages ravaged the global automotive industry. Semiconductors in Automotive Supply Chain. million vehicles in 2021. The Act was signed into law by US President Biden on August 9, 2022. Strong Legislation.

Supply Chain 52

Supply Chain Automotive Sourcing Manufacturing 52

Foley

JULY 11, 2023

While these two trends are common across many industries, perhaps nowhere are they more pronounced than in the automotive industry. Beyond the automotive industry, even the most basic household appliances are now wireless and connected. New companies may have limited resources and expertise necessary to overcome hurdles that may arise.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40