Canadian Manufacturing

APRIL 26, 2023

an international manufacturer of aerospace products and a landing gear manufacturer, announced that the unionized employees of its Longueuil, Québec, facility have voted in favour of the renewal of a three-year collective agreement, which now extends through April 30, 2026. LONGUEUIL — Héroux-Devtek Inc., Héroux-Devtek Inc.

Aerospace 40

Aerospace Manufacturing Supply Chain 40

E&T

JANUARY 9, 2023

As the Aerospace Technology Institute’s FlyZero study pointed out and as Airbus revealed at its 2022 technology summit , significant progress can – and is – being made within R&D for larger aircraft powered by hydrogen, with larger aircraft potentially using hydrogen combustion coming into service in the mid-2030s.

Aerospace 126

Aerospace 126

Dinesh Mishra

MAY 24, 2024

AZAD will start delivering first batch of fully integrated engines by early 2026. Siemens Energy, Eaton Aerospace and MAN Energy Solutions SE amongst others. The long-term contract involves the complete manufacturing and assembly of an Advanced Gas Turbine Engine, crucial for defence applications. Mitsubishi Heavy Industries, Ltd.,

Aerospace 52

Aerospace Manufacturing 52

i4.0 today

NOVEMBER 20, 2023

Including £2bn for the automotive industry, £975m for aerospace and £960m for clean energy, the funding will be available to UK manufacturers from 2025, following the next general election. In 2025-26, the scheme will be rolled out across all the whole of England before its UK-wide expansion from 2026-27.

Manufacturing 52

Manufacturing Aerospace Automotive Automation 52

Manufacturer's Monthly

NOVEMBER 19, 2023

The rover will go to the Moon as part of a future Artemis mission by as early as 2026. NASA will attempt to extract oxygen from the sample. This is a key step towards a sustainable human presence on the Moon. More than 8,200 people and schools from across Australia entered the competition to name the rover.

Manufacturing 80

Manufacturing Aerospace 80

Manufacturer's Monthly

JULY 2, 2024

The mission, scheduled for launch on NSIL’s Small Satellite Launch Vehicle (SSLV) in 2026, represents a significant milestone in the strategic partnership, fostering closer ties between commercial, institutional, and governmental space organisations of both nations. million grant from the Australian Government.

Manufacturing 104

Manufacturing Aerospace 104

Additive Manufacturing

SEPTEMBER 4, 2022

per SLM Share (the “Takeover Offer”) accompanied by a public offer to the holders of the Convertible Bonds 2026 (as defined below) issued by SLM (the “Bonds Offer”) (the Capital Increase, the Takeover Offer and the Bonds Offer together: the “Acquisition”). i), (ii) and (iii) collectively the “Convertible Bonds 2026”). JPY 84 billion).

3D printing 52

3D printing Additive manufacturing Digital manufacturing Aerospace 52

Fabricating & Metal Work

NOVEMBER 12, 2024

With weight-reduction being a priority for industries such as motorsports and aerospace, many manufacturers have recently turned to the lightweight aluminum-silicon-magnesium based alloys, such as F357 and AlSi10Mg, when 3D printing parts for everything from race cars to rockets.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

Manufacturer's Monthly

JULY 9, 2024

This includes securing a $50m Series C funding round, doubling its valuation to $350m, and planning to send a variant to the Moon by 2026. Over the past year, Fleet Space has been recognised as Australia’s fastest-growing company, experiencing rapid global adoption and exponential growth.

Artificial Intelligence 92

Artificial Intelligence Manufacturing Aerospace 92

Dinesh Mishra

AUGUST 4, 2022

Mitchell, IPC President and CEO , “We are excited about current manufacturing opportunities in India which is forecasted to bring the Indian electronics industry to US$300 billion by 2026, from US$75 billion presently. India is poised to become a global manufacturing hub, exporting approximately US$120 billion by 2026.

Electronics 98

Electronics Manufacturing Supply Chain Automotive 98

Canadian Manufacturing

NOVEMBER 5, 2024

MP Chahal announces federal investments to grow Alberta’s aerospace and aviation industry (CNW Group/Prairies Economic Development Canada) EDMONTON — On Nov. million in PrairiesCan funding that are contributing to Alberta’s aerospace and aviation industry. million for UVAD Technologies Inc.

Aerospace 52

Aerospace Composites Value chain Manufacturing 52

E&T

OCTOBER 31, 2022

The first Made in India aircraft is scheduled from September 2026 and can be used for civilian purposes. Modi said: “In the coming years, the Defence and Aerospace sectors will be two important pillars for making India 'Atmanirbhar'. Investments in aerospace and defence (A&D) are expected to increase. 21,935 crore.

Aerospace 40

Aerospace Logistics Electronics Manufacturing 40

E&T

APRIL 5, 2023

The SSC is an international organisation of satellite operators, aerospace companies and industry representatives. We are also backing the UK’s first national space debris removal mission launch in 2026 and have recently launched the 'monitor your satellite' service which gives collision warning information to UK satellite operators.”

Aerospace 109

Aerospace Robotics Robotics Automation 109

Dinesh Mishra

SEPTEMBER 20, 2022

Crore by 2026. we will be introducing at least ten new products year on year, Also, we shall be addressing solutions for the new age materials like Inconel materials, composites etc for aerospace and defence. Main Factors. The auto sector, a key user of machine tools, is set to grow 3.5 to 4 times from its current size of INR 5.7L

Composites 52

Composites Aerospace Manufacturing Automation 52

Fastener News Desk

MAY 1, 2024

Additionally, the partners will design, engineer and produce titanium fasteners for critical sectors such as the aerospace, naval, oil & gas, power generation, pulp & paper and chemical sectors. industries including aerospace, defense, consumer electronics, hydrogen, electric vehicles and additive manufacturing.

Aerospace 59

Aerospace Manufacturing Advanced manufacturing Additive manufacturing 59

Frost & Sullivan Manufacturing

JUNE 30, 2022

million by 2026 from $613.7 Frost & Sullivan’s recent analysis, Global Dimensional Metrology Software Growth Opportunities , finds quality inspection and reverse engineering of components across applications to be key enablers for metrology equipment and software. million in 2021, an uptick at a compound annual growth rate (CAGR) of 6.7%.

Artificial Intelligence 52

Artificial Intelligence Cycle time Aerospace Automotive 52

Plastics News

AUGUST 4, 2023

Kanata makes wire, cable and connectors for nuclear, aerospace, military, medical and commercial applications. As they approach normal production capacity in 2026, the plants could generate more than C$50 (US$37.4 This new site will also house Kanata Electronic Services Ltd., million) in annual sales.

Composites 52

Composites Electronics Automotive Aerospace 52

Robotics Business Review

FEBRUARY 22, 2024

It is a precursor to the upcoming Artemis program , whose goal is to send humans back to the moon by late 2026. This mission is part of the Commercial Lunar Payload Services, or CLIPS initiative. “Today is a day that shows the power and promise of NASA’s commercial partnerships,” stated Bill Nelson, NASA administrator.

Robotics 126

Robotics Robotics Manufacturing Aerospace 126

Robotics Business Review

NOVEMBER 15, 2024

Following its anticipated 2026 launch on the Northrop Grumman’s MRV spacecraft bus, the robotic payload will undergo initial checkout and calibration with full operational servicing missions to follow.

Robotics 59

Robotics Robotics Compliance Electronics 59

MEM

SEPTEMBER 7, 2023

Rolls-Royce’s supply chain and assembly are also on schedule to deliver ground and flight test engines on time in 2024 through 2026. As testing continues throughout the year, Rolls-Royce is on track for Critical Design Review to begin in the first quarter of 2024.

Supply Chain 52

Supply Chain Manufacturing Aerospace 52

Manufacturer's Monthly

MARCH 21, 2023

It aims to launch by 2026. The rover is part of the NASA Moon to Mars mission which will be a major step towards a sustainable human presence on the Moon and supporting future missions to Mars.

Robotics 102

Robotics Robotics Automation Manufacturing 102

Additive Manufacturing

DECEMBER 16, 2022

” Additionally, StandardAero, one of the aerospace industry’s largest independent maintenance, repair, and overhaul (MRO) providers, will ensure that Symphony is designed for maintainability. Production is set to commence in 2024 at Overture’s Superfactory in Greensboro, NC, with rollout in 2026 and first flight in 2027.

Additive manufacturing 52

Additive manufacturing Aerospace Manufacturing 52

Canadian Manufacturing

JANUARY 26, 2023

MONTREAL — The Consortium for Research and Innovation in Aerospace of Quebec (CRIAQ) announces six collaborative research and development projects, for a total of 17 projects approved and funded by the industry and the Quebec government to advance aerospace technology innovations in Quebec in direct response to market demand.

Aerospace 45

Aerospace Manufacturing 45

E&T

MARCH 13, 2023

Project lead for Spirit of Innovation and now Rolls-Royce Electrical’s customer director, Parr explains how the aircraft was propelled on its record-breaking runs by a 400kW (500+hp) electric powertrain, and the most power-dense propulsion battery pack ever assembled in aerospace: 6,480 cells producing enough power to charge 7,500 mobile phones.

Aerospace 52

Aerospace Sourcing Manufacturing 52

Ionthis

JANUARY 16, 2021

billion by the end of 2026, it’s clear that this process has new applications that are being discovered each day. These industries include electronics, telecommunications, lighting, construction, automotive, aerospace, and energy. Applications of Sheet Metal Fabrication. Ionthis Inc. Applications of Sheet Metal Fabrication.

Electronics 52

Electronics Prototype  3D printing Robotics 52

Canadian Manufacturing

NOVEMBER 14, 2022

14, François-Philippe Champagne, Minister of Innovation, Science and Industry, announced a $43M contract to Canadensys Aerospace Corporation (Canadensys), from Bolton, Ontario, and its industrial and academic partners to build the first Canadian lunar rover. LONGUEUIL — On Nov.

Aerospace 40

Aerospace Robotics Robotics Advanced manufacturing 40

Dinesh Mishra

DECEMBER 13, 2023

By 2026, 63% of companies in India intend to buy most key items from regional suppliers, up from 34% today. Even more organizations (77%) in India plan to produce and sell most of their products in the same region by 2026, up from 29% today. billion in 2026, according to the report.

Supply Chain 52

Supply Chain Assembly Line Consumer Goods Automotive 52

Canadian Manufacturing

DECEMBER 4, 2023

billion for the jets themselves, and the planes are expected to be delivered in 2026 and 2027. ” Industry Minister Francois-Philippe Champagne said Boeing has committed to establishing an “innovation centre” in Montreal — a global aerospace hub and Bombardier’s home base. The deal costs more than $10.3

Aerospace 81

Aerospace Prototype  Sourcing Manufacturing 81

Canadian Manufacturing

JULY 24, 2024

The agreement extends Quebec’s equity interest redemption date to 2035, allowing Airbus Canada to enhance the A220 programme, aiming for 14 monthly aircraft deliveries by 2026.

Aerospace 59

Aerospace Manufacturing 59

Canadian Manufacturing

JULY 24, 2024

The shareholders also agreed to extend the redemption date of the Government of Quebec’s equity interest in the partnership, from 2030 for an additional five-year period to 2035, which will give Airbus Canada time to create more value for the A220 programme, particularly as we aim to deliver 14 aircraft per month in 2026.

Aerospace 52

Aerospace Manufacturing Supply Chain 52

Canadian Manufacturing

JANUARY 10, 2023

The initial order will be for 16 F-35s, the first of which will be delivered to the Canadian military in 2026. And while the first four aircraft are scheduled to be delivered in 2026, officials said they will initially be located in the U.S. as the Canadian military prepares the necessary facilities.

Supply Chain 40

Supply Chain Aerospace Manufacturing 40

Canadian Manufacturing

MARCH 24, 2023

Modernizing Norad: Until last month, the binational early-warning system known as the North American Aerospace Defence Command might have been best known for tracking Santa Claus on Christmas Eve. But a February flurry of unidentified flying objects drifting through North American airspace, most notably what U.S.

Supply Chain 40

Supply Chain Aerospace Automotive Sourcing 40

Canadian Manufacturing

JULY 19, 2022

aviation organization reached an agreement — voluntary until 2026, then mandatory — in which airlines can offset their emissions by investing in projects to reduce greenhouse gases in other ways. It has been used many times on test flights and even regular flights with passengers on board.

Aerospace 45

Aerospace Manufacturing 45

Canadian Manufacturing

DECEMBER 21, 2022

While the federal government has said it plans to buy 88 new fighter jets to replace its aging CF-18s between 2026 and 2032, the sources said Canada will be purchasing F-35s in blocks over the next few years. The funding approval came after months of negotiations with the U.S.

Sourcing 45

Sourcing Manufacturing Aerospace 45

Canadian Manufacturing

DECEMBER 23, 2022

While the federal government has said it plans to buy 88 new fighter jets to replace its aging CF-18s between 2026 and 2032, the sources said Canada will be purchasing F-35s in blocks over the next few years. But the government cancelled the plan after Boeing launched a trade dispute with Montreal aerospace firm Bombardier.

Sourcing 74

Sourcing Aerospace Manufacturing 74

Canadian Manufacturing

DECEMBER 1, 2023

Air Canada’s credits will last from 2026 to 2029. This increased partnership is great news for Canada’s aerospace as we continue working together towards the reduction of aviation carbon footprint. DACCS technology filters and removes CO2 emissions directly from the air using high-powered extraction fans.

Aerospace 74

Aerospace Form Sourcing Manufacturing 74

Canadian Manufacturing

JUNE 20, 2024

” The first upgraded CH-146 Griffon completed under the GLLE project is expected to be delivered to the Canadian government in 2026 pending military certification. . “The GLLE program will help ensure that the Royal Canadian Air Force is equipped with cutting-edge defence technologies for years to come.”

Manufacturing 52

Manufacturing Aerospace Advanced manufacturing 52