E&T

OCTOBER 12, 2022

“An excellent example of new technology to lever quality, productivity, cost reduction, customer satisfaction and capacity – all that any manufacturing engineer could wish for.”. The finalists for 2022 have been selected and are listed on the following pages. Most Innovative Project for the Future of Manufacturing. Nuclear AMRC.

Automation 94

Automation Sourcing Manufacturing Digital manufacturing 94

Mold Making Technology

DECEMBER 21, 2022

SyBridge Technologies announces that its wholly owned affiliate, SyBridge Digital Solutions LLC, has been selected as the winning bidder of certain assets of Fast Radius Inc. , a provider of digital manufacturing solutions. The sale is subject to bankruptcy court approval and is expected to close before the end of 2022.

Digital manufacturing 52

Digital manufacturing Prototype  Artificial Intelligence Manufacturing 52

Mold Making Technology

DECEMBER 4, 2022

Each article highlights the 10 most-viewed pieces of content of 2022 —this is based on their number of page views as reported by Google Analytics. To start off the month of December, we’ve shared the top five most-viewed products of 2022 in the following categories (note that analytics were pulled from Jan. 1, 2022 to Nov.

3D printing 98

3D printing Cycle time Automation Additive manufacturing 98

Control Engineering

SEPTEMBER 14, 2022

Manufacturing Supply Chain Insights. Manufacturing is the No. Many small and midsized manufacturers assume their limited profile shields them from being targeted in cyberattacks, the opposite is often true thanks to the supply chain. Given the interconnectedness of global manufacturing, cybersecurity can be a massive challenge.

Supply Chain 52

Supply Chain Digital manufacturing Manufacturing 3D printing 52

Manufacturer's Monthly

OCTOBER 10, 2022

Australia is perfectly poised to become a global leader in the production of high-value products across industries – but this cannot happen without the buy-in of local manufacturers. . A further $1 billion has been allocated to specifically support the growth of advanced manufacturing. . Manufacturing is in Australia’s DNA’ .

Manufacturing 98

Manufacturing Smart manufacturing Artificial Intelligence Robotics 98

Additive Manufacturing

SEPTEMBER 7, 2022

Leuven (Belgium) / September 7, 2022 — Materialise has acquired Identify3D, a company that develops software to encrypt, distribute and trace the flow of digital parts across complex supply chains. The acquisition of Identify3D makes Materialise’s CO-AM platform the most secure platform for distributed manufacturing. .

3D printing 98

3D printing Supply Chain Manufacturing Digital manufacturing 98

Additive Manufacturing

JANUARY 5, 2023

As the community finds more applications, improves processes, and looks for new technology, solution providers are working to support additive manufacturing growth through collaboration, investment, and funding. The funds will be used for process and material development of additive manufacturing of RF (radio frequency) devices.

Additive manufacturing 59

Additive manufacturing 3D printing Manufacturing Digital manufacturing 59

Manufacturer's Monthly

SEPTEMBER 14, 2022

To thrive in this world of disruption, manufacturers must reduce complexity by investing in cloud-first technologies and automation. This is the position of CISCO Meraki, Cloud Network Partner of the Modern Manufacturing Expo which is set to make its long-awaited debut at the Sydney Showground on 20 and 21 September.

Manufacturing 98

Manufacturing Enterprise Resource Planning (ERP) Industry 4.0 Industry 4.0 98

Manufacturer's Monthly

JULY 25, 2022

The Modern Manufacturing Expo, which takes place at the Sydney Showground in September, has added two one-day conferences to their education program: the Smart Manufacturing Conference and the Green & Sustainable Manufacturing Summit. Smart Manufacturing Conference . Green & Sustainable Manufacturing Summit .

Manufacturing 98

Manufacturing Smart manufacturing 3D printing Robotics 98

iBASEt

JUNE 30, 2022

The National Association of Manufacturers has forecast that more than 2 million manufacturing jobs will go unfilled by the end of this decade. Bearing the brunt of this will be the small to medium-sized manufacturers, as they compete against larger enterprises better positioned to outbid them for skilled resources.

Manufacturing 93

Manufacturing Supply Chain Digital manufacturing 93

AU Manufacturing

SEPTEMBER 14, 2022

To thrive in this world of disruption, manufacturers must reduce complexity by investing in cloud-first technologies and automation. This is the position of CISCO Meraki, Cloud Network Partner of the Modern Manufacturing Expo which is set to make its long-awaited debut at the Sydney Showground on 20 and 21 September.

Manufacturing 80

Manufacturing Enterprise Resource Planning (ERP) Industry 4.0 Industry 4.0 80

Manufacturer's Monthly

JUNE 12, 2023

Markforged is combing innovation culture with real manufacturing capabilities to make an impact on Australia’s Defence industry. Manufacturers’ Monthly speaks with one of the company’s partners to learn why additive manufacturing is being adopted by defence on land and sea. Part of this journey, in a big way, is Markforged.

Additive manufacturing 98

Additive manufacturing Manufacturing Composites Rapid prototyping 98

AU Manufacturing

JULY 24, 2022

The Modern Manufacturing Expo, which takes place at the Sydney Showground in September, has announced the addition of two one-day conferences to their education program: the Smart Manufacturing Conference, taking place on 20 September and the Green & Sustainable Manufacturing Summit on 21 September 2022.

Smart manufacturing 87

Smart manufacturing Manufacturing 3D printing Advanced manufacturing 87

eFlex Systems

MAY 18, 2022

May 18, 2022 --. ROCHESTER HILLS, Mich. ,

Digital manufacturing 52

Digital manufacturing Manufacturing 52

i4.0 today

SEPTEMBER 5, 2022

The Manufacturing & Supply Chain Conference & Exhibition , which is being held at the SEC Glasgow on the 13 th October 2022, will serve as a national forum for manufacturers and operators involved throughout the associated supply chains from across Scotland to gather to discuss pressing issues facing the industry.

Supply Chain 97

Supply Chain 3D printing Manufacturing Industry 4.0 97

Fabricating & Metal Work

FEBRUARY 7, 2025

Chen brings extensive leadership experience to AWS, having previously held CEO roles at Fathom Digital Manufacturing Solutions (NYSE:FATH), Cadrex Manufacturing Solutions, and Incodema Holdings LLC, and as executive chairman and president of Cincinnati Incorporated. Most recently, he chaired the Audit Committee.

Digital manufacturing 52

Digital manufacturing Manufacturing 52

i4.0 today

OCTOBER 6, 2022

The Manufacturing & Supply Chain Conference & Exhibition, which is being held at the SEC Glasgow on Thursday, 13th of October 2022, will be the largest event of its kind in Scotland. Impressive Line-up of Speakers.

Supply Chain 52

Supply Chain Industry 4.0 Industry 4.0 3D printing 52

Frost & Sullivan Manufacturing

JANUARY 23, 2023

Mumbai, India, January 23, 2023 – Frost & Sullivan concluded the 18th edition of the India Manufacturing Excellence Awards (IMEA) at Taj Bangalore, Bengaluru. The companies were evaluated for using digital manufacturing tools, optimizing their supply chain, and effectively enhancing their manufacturing capabilities.

Manufacturing 52

Manufacturing Supply Chain Automotive Pharmaceutical 52

Additive Manufacturing

NOVEMBER 20, 2022

Palo Alto, CA/ November 14, 2022 – This week at Formnext, HP is showcased its new commercial Jet Fusion. HP continues to provide us with the advancements we need to push the boundaries of additive manufacturing and produce the final parts our customers need,” said Jan Löfving, CEO, Prototal Industries.

Consumer Goods 91

Consumer Goods Additive manufacturing Digital manufacturing Automotive 91

Dinesh Mishra

AUGUST 22, 2022

PUNE, INDIA, August 23, 2022 – Fictiv , the operating system for custom manufacturing, recently announced the opening of its new office in Pune, India, which will serve to complement its U.S. With a recent $100 million Series E funding round, that brings the company’s total funding to $192 million since its founding in 2013.

Digital manufacturing 98

Digital manufacturing Supply Chain Sourcing Manufacturing 98

Factory Worx

JULY 19, 2022

This transformation was caused due to the improvements in manufacturing technology, which has always welcomed new innovations. One of them is Artificial Intelligence in manufacturing industry 4.0. Why Do You Need AI Manufacturing? Impact of AI in manufacturing 4.0 technologies.

Artificial Intelligence 98

Artificial Intelligence Industry 4.0 Industry 4.0 Supply Chain 98

Fabricating & Metal Work

AUGUST 26, 2022

WHAT: Fathom is exhibiting at the International Manufacturing Technology Show (IMTS) in Chicago, IL, from September 12 – 17, 2022, and will be exhibiting a few new technologies, including additive metal 3D printing. Fathom has become the largest on-demand digital manufacturing platform in North America.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Supply Chain 52

Additive Manufacturing

SEPTEMBER 14, 2022

14, 2022 — Nikon announced an investment in Hybrid Manufacturing Technologies Global and their approach that enables users to integrate additive tools onto any platform. Parts manufacturers will often use AM processing and machining in tandem, depending upon their specific production goals and tolerances. TOKYO, Sept.

Manufacturing 52

Manufacturing Digital manufacturing Automotive Additive manufacturing 52

Control Engineering

OCTOBER 10, 2022

On day 2, October 18, of the Fall 2022 session of CFE Media’s Virtual Training Week, Ted Rozier, director of engineering at the Mason, OH-based Festo Didactic Solution Center, North America, will present on the topic of “ How to unleash the power of Smart Manufacturing while ensuring automation and robotic safety. ”.

Smart manufacturing 52

Smart manufacturing Industry 4.0 Industry 4.0 Manufacturing 52

Factory Worx

DECEMBER 27, 2022

Why should manufacturers in Australia invest in Digital Transformation for effective production? Digital transformation is expanding in the entire manufacturing sector. If manufacturing firms are unable to understand what's best for them it will result in unproductive employees, outdated processes in the coming future.

Industry 4.0 52

Industry 4.0 Industry 4.0 Enterprise Resource Planning (ERP) Manufacturing 52

Factory Worx

JUNE 8, 2022

Why is Continuous Improvement Necessary for the Manufacturing Industry? In today's competitive manufacturing world, those who don't improve their business are at risk of being left behind. They will never achieve that goal without continuous process improvement in manufacturing workflows. Read Our Blog.

Manufacturing 52

Manufacturing Industry 4.0 Industry 4.0 Artificial Intelligence 52

Additive Manufacturing

SEPTEMBER 9, 2022

MINNEAPOLIS/September 8, 2022 — Protolabs announced Oleg Ryaboy as its new Global Chief Technology Officer effective September 9, 2022. With an all-new e-commerce platform and the addition of a distributed network of suppliers, we’re entering the next chapter of digital manufacturing.

Artificial Intelligence 52

Artificial Intelligence Digital manufacturing Additive manufacturing Function 52

Additive Manufacturing

AUGUST 27, 2022

17, 2022 — ExLattice, Inc announced receiving a Phase I award from the National Science Foundation (NSF) Small Business Innovation Research (SBIR) Program for further developing its accelerated simulation engine dedicated to additive manufacturing. DURHAM, N.C., ” About NSF’s Small Business Programs.

Additive manufacturing 52

Additive manufacturing Manufacturing Digital manufacturing Advanced manufacturing 52

Factory Worx

APRIL 21, 2022

Top 16 Frequently Asked Questions About Manufacturing Execution system (MES). The manufacturing industry, like any other industry, is rapidly expanding. Successful manufacturing businesses are adaptable and consistently improve their overall operating efficiency. What is a Manufacturing Execution System (MES)?

Manufacturing Execution System (MES) 52

Manufacturing Execution System (MES) Industry 4.0 Industry 4.0 Enterprise Resource Planning (ERP) 52

i4.0 today

APRIL 21, 2023

The Manufacturing Technologies Association (MTA) has expanded its support to the engineering-based manufacturing sector with the formation of a new cluster of trade associations and events. The MTA is the UK’s trade association for companies in the engineering based manufacturing technologies sector.

Supply Chain 52

Supply Chain 3D printing Manufacturing Additive manufacturing 52

Factory Worx

MAY 19, 2022

How does OEE Help in the Food Manufacturing Industry? Overall Equipment Effectiveness (OEE) is the go-to metric for food manufacturing facilities to recognise losses and benchmarking advancement toward improving throughput performance. It's used to figure out what percentage of manufacturing time is productive. Read Our Blog.

Overall Equipment Effectiveness (OEE) 52

Overall Equipment Effectiveness (OEE) Manufacturing Industry 4.0 Industry 4.0 52

Factory Worx

MAY 4, 2022

Why Asset Management in Smart Manufacturing is Key to Success. Implementing asset management in Manufacturing can be an essential part of the asset-heavy industry. Manufacturing is an asset-intensive business. What is Smart Manufacturing? What are the benefits of Asset Management in smart Manufacturing?

Smart manufacturing 52

Smart manufacturing Industry 4.0 Industry 4.0 Manufacturing 52

Additive Manufacturing

SEPTEMBER 12, 2022

Palo Alto, CA, September 12 th , 2022 – HP Inc. Accelerating innovative designs and products and digitally printing mass quantities of quality parts, HP’s Metal Jet S100 Solution is transforming industries and helping scale 3D metals to mass production. announced the commercial availability of its Metal Jet S100 Solution.

3D printing 52

3D printing Manufacturing Supply Chain Digital manufacturing 52

Additive Manufacturing

SEPTEMBER 4, 2022

SLM Press Release – SLM enters into Investment Agreement with Nikon to further enhance SLM’s leadership position in Additive Manufacturing Nikon to launch all cash public takeover offer for SLM at EUR 20 per share, representing a premium of 75% to the undisturbed closing price as of September 1 st 2022 Key shareholders Elliott, ENA and Hans J.

3D printing 52

3D printing Additive manufacturing Digital manufacturing Aerospace 52

Fabricating & Metal Work

DECEMBER 20, 2022

Despite ongoing issues such as finding qualified and skilled workers, and with an improving though still challenging supply chain situation, the manufacturing sector continues to perform well, prepared to overcome hiccups. Areas of collaboration include automation, robotics and digitalization of processes. Implemented.”

Supply Chain 52

Supply Chain Industry 4.0 Industry 4.0 Digital manufacturing 52

Dinesh Mishra

OCTOBER 24, 2022

Industry 4.0 – Telelogos announces the publication of a white paper jointly written with SAP about the usage of digital signage to improve the experience of the production staff in manufacturing companies and in logistics. Beaucouzé – France — October, 2022 – Industry 4.0 connects resources and contributors.

Industry 4.0 52

Industry 4.0 Industry 4.0 Manufacturing Supply Chain 52

Additive Manufacturing

DECEMBER 11, 2022

December 9, 2022 — SyBridge Digital Solutions will acquire certain assets of Fast Radius. The sale is subject to bankruptcy court approval and is expected to close before the end of 2022. The post SyBridge Technologies to Acquire Certain Assets of Fast Radius appeared first on Additive Manufacturing (AM).

Prototype  52

Prototype  Artificial Intelligence Digital manufacturing Additive manufacturing 52