Additive Manufacturing

NOVEMBER 16, 2022

November 16, 2022 — Nano Dimension has signed an agreement with Tethon 3D to develop new materials for its Fabrica 2.0 micro additive manufacturing system. Our customers have been asking for a micro-AM platform to manufacture production parts,” said Trent Allen, Chief Executive Officer of Tethon 3D.

3D printing 98

3D printing Additive manufacturing Industry 4.0 Industry 4.0 98

Additive Manufacturing

DECEMBER 17, 2022

15, 2022 — ABCorp announced the partnership with sport technology startup BATS-TOI to manufacture The Mercado, advanced multisport headgear using 3D print technology. ” Manufacturing will take place in ABCorp’s 125,000 sq. ” Manufacturing will take place in ABCorp’s 125,000 sq.

3D printing 98

3D printing Manufacturing Compliance Additive manufacturing 98

Additive Manufacturing

NOVEMBER 17, 2022

Krakow/November 17, 2022 — Krakow-based start-up Wimba is set to manufacture individual orthotic and prosthetic medical devices for dogs with HP Multi Jet Fusion (MJF) technology. . Founded in October 2022, Wimba aims to innovate the field of individual orthopaedic supplies by creating 3D products to restore animal mobility.

3D printing 92

3D printing Lead Time Function Additive manufacturing 92

Additive Manufacturing

FEBRUARY 8, 2023

Free report covering new developments and community survey results for medical additive manufacturing/3D printing now available. The key trend for 2022 was growth – significant growth – for the medical additive manufacturing/3D printing community.

3D printing 40

3D printing Additive manufacturing Manufacturing Form 40

Additive Manufacturing

JULY 29, 2022

DARMSTADT, Germany, July 28, 2022 — Scientists at Fraunhofer IGD have devised a purely geometric and algorithmic method for the elimination of stair-step artifacts in multi-material 3D printing. Stair-step artifacts are unavoidable in conventional 3D printing processes. Read full paper here.

3D printing 98

3D printing Function Additive manufacturing Manufacturing 98

Additive Manufacturing

SEPTEMBER 28, 2022

Leanna Levine and her team at ALine specialize in the development of microfluidics solutions for customers in particular incorporating 3D printing for proof-of-concept and rapid prototyping of lab-on-chip devices. “We’ve The post Wearable Medical Devices and 3D Printing appeared first on Additive Manufacturing (AM).

3D printing 98

3D printing Prototype  Rapid prototyping Electronics 98

Additive Manufacturing

JANUARY 11, 2023

Additive manufacturing hardware solution providers were once again busy in 2022. Highlights included more options for printing bigger and smaller, printing electronics and composites, and a couple of open platforms to allow more material development for industry and researchers.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Composites 98

Additive Manufacturing

JANUARY 13, 2023

Additive manufacturing materials are often the driver for new applications including production applications. In 2022, the AM community introductions of new materials for electronics, tissue fabrication, corrosive environments, consumer products, sporting equipment, and more. Take a look at the 2022 materials development.

Additive manufacturing 95

Additive manufacturing 3D printing Manufacturing Electronics 95

Additive Manufacturing

JULY 21, 2022

July 21, 2022– Terran Orbital Corporation has commissioned Fleet Space CENTAURI-5 payload; a satellite with 3D printed all metal patch antennas. The all-metal patch antennas are all entirely 3D printed – a world first. BOCA RATON, Fla./July This combination increases the satellite’s data capacity by 2.6

3D printing 98

3D printing Function Additive manufacturing Manufacturing 98

AU Manufacturing

MARCH 10, 2023

A recent study by SkyQuest Technology Consulting has found that the 3D printing construction market is projected to surpass USD 397.5 With the positive figures, the construction 3D printing business is expected to grow as the market for construction equipment expands. by 2030 appeared first on Australian Manufacturing.

3D printing 75

3D printing Prototype  Manufacturing 75

Additive Manufacturing

OCTOBER 1, 2022

29, 2022 — SINTX Technologies, Inc. The device will be constructed of a 3D printed continuous carbon fiber (cCF) reinforced polyetherketoneketone (PEKK) plate with silicon nitride embedded into its surface. The trauma plate will also feature design customization through the 3D printing production method.

3D printing 97

3D printing Composites Form Additive manufacturing 97

Additive Manufacturing

JANUARY 16, 2023

Additive manufacturing software today does much more than support design and file prep for the process. 2022 saw more integrations with other systems, features and cloud-based approaches. QuinlyVision includes AutoCorrect 3D , to detect, automatically respond, and suggest solutions to 14 common print failures.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Smart manufacturing 98

Additive Manufacturing

SEPTEMBER 26, 2022

HP released their highly anticipated Metal Jet S100 Solution for Mass Production of 3D Printed Metals at IMTS 2022. Tim Weber, Global Head of 3D Materials at HP Inc. Penna to go over the new HP Metal Jet 3D printer in their booth during IMTS 2022 in Chicago. appeared first on Additive Manufacturing (AM).

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Additive Manufacturing

JULY 21, 2022

SJ Jones personal journey into metal 3D printing and additive manufacturing was inspirational to have the pleasure of learning more about at the 2022 AM Industry Summit in Long Beach, California. The post The Application Engineering and Metal 3D Printing Journey appeared first on Additive Manufacturing (AM).

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Additive Manufacturing

SEPTEMBER 6, 2022

SAN FRANCISCO — September 6, 2022 — Mantle , announced the commercial launch and availability of its metal 3D printing technology for toolmaking. The system simplifies how mold tool components are made and accelerates how manufacturers making molded parts – a $265 billion market – go from product idea to launch.

3D printing 98

3D printing Additive manufacturing Automation Manufacturing 98

AU Manufacturing

MAY 22, 2023

A recent report from SmarTech Analysis revealed that the global dental 3D printing industry is expected to grow from $4 billion in 2022 to slightly over $9.7 billion by 2031, accounting for nearly one-third of the overall additive manufacturing (AM) market. billion in revenue by 2022.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Automation Mag

JUNE 5, 2023

UltiMaker recently announced the reformation of its brands following the merger of Ultimaker and MakerBot in 2022. The new brand identity reflects the company’s strategic vision to drive adoption of desktop 3D printing solutions, and introduces a new product architecture.

3D printing 59

3D printing Manufacturing 59

Additive Manufacturing

NOVEMBER 30, 2022

21, 2022 — Triastek, Inc. , 21, 2022 — Triastek, Inc. , With a unique 3D dosage form design, T21 can reach the targeted colon segment of the GI tract, thus permitting use of a lower drug dose than the reference listed drug, which provides systemic exposure. NANJING, China, Nov.

3D printing 98

3D printing Form Pharmaceutical Additive manufacturing 98

Additive Manufacturing

JANUARY 8, 2023

During Formnext 2022 in Frankfurt, Germany, Adam Penna had a quick chat about Additive Manufacturing (AM) materials with Uniformity Labs , CEO Adam Hopkins on Laser Powder Bed Fusion (LPBF) for metal 3D printing. Ultra-dense materials that double the throughput without compromise to mechanical properties.

3D printing 52

3D printing Additive manufacturing Advanced manufacturing Manufacturing 52

AU Manufacturing

SEPTEMBER 30, 2022

The global additive manufacturing sector has generated a total of $3 billion for the second consecutive quarter of 2022, according to SmarTech Analysis. Still, business leaders in the industry reaffirmed their expectations, noting additive’s value in innovating manufacturing during periods of an extended supply crisis. .

Additive manufacturing 84

Additive manufacturing 3D printing Supply Chain Manufacturing 84

Fabricating & Metal Work

FEBRUARY 14, 2024

Mantle, the leader in metal 3D printing technology for toolmaking, recently revealed new customers and several new case studies that illustrate how customers are automating their toolmaking with Mantle technology. A Mantle system being shipped from Mantle headquarters to Spectrum Plastics Group. Photo courtesy of Mantle.

3D printing 52

3D printing Prototype  Automation Lead Time 52

Additive Manufacturing

DECEMBER 4, 2022

With the additional laser power, the MfgPro236 extends its material capability to revolutionary new materials like 3DSystems PAX nylon copolymer, Jabil PK-5000 PolyKetone, and Evonik TPC are unlocking new applications in additive manufacturing that further bring the effectiveness of SLS to the fore. ANAHEIM, Calif./Nov.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Additive Manufacturing

OCTOBER 14, 2022

13, 2022 — ulrich medical USA, Inc. announced the FDA has given 510(k) clearance of its Flux-C 3D printed porous titanium cervical interbody device. Flux-C is manufactured using a 3D printing process called direct metal laser sintering (DMLS). LOUIS, Oct. Eric Lucas, Ph.D.,

3D printing 98

3D printing Additive manufacturing Manufacturing 98

E&T

MARCH 24, 2023

The Long Beach, California-based company's 110-foot-tall (33.5m) Terran 1 rocket, which is 85 per cent made of 3D-printed parts, lifted off on its debut flight around 11:25 p.m. Relativity's launch was intended to validate the company's supposition that its rocket's 3D-printed structure can withstand the forces of a launch off Earth.

3D printing 59

3D printing Supply Chain Robotics Robotics 59

Additive Manufacturing

JULY 29, 2022

July 27, 2022 — Infinite Materials Solutions, LLC launched AquaSys® General Purpose (GP), a water-soluble support material compatible with most polyesters. It is a direct replacement for polyvinyl alcohol (PVA) and showcases outstanding performance and print fidelity with standard polylactic acid (PLA)-type build materials.

3D printing 96

3D printing Additive manufacturing Sourcing Manufacturing 96

AU Manufacturing

SEPTEMBER 20, 2022

Wire additive manufacturing company AML3D is expanding the scope of its 3D printed components supply for Boeing to further develop its strategic partnership with the aerospace company. . The new purchase agreement is on standard commercial terms. .

3D printing 59

3D printing Aerospace Quality Management System Supply Chain 59

Additive Manufacturing

SEPTEMBER 30, 2022

Zach Murphree , VP of Global Sales and Business Development at Velo3D took a moment at IMTS 2022 to chat with Adam J. The post IMTS 2022 booth chat: Velo3D, metal 3D printing update with Zach Murphree, VP of Global Sales and Business Development appeared first on Additive Manufacturing (AM).

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Additive Manufacturing

DECEMBER 4, 2022

November 29, 2022 – Purdue University researchers have developed a patent-pending method to add particles to filament and disperse them evenly through a traditional fused deposition modeling, or FDM, 3D printer, which will aid industry in manufacturing functional parts. WEST LAFAYETTE, Ind./November Brittany Newell and Jose M.

3D printing 52

3D printing Function Prototype  Additive manufacturing 52

Additive Manufacturing

JULY 25, 2022

WEITERSTADT, Germany, July 25, 2022 — SprintRay announced SprintRay Crown , a 3D printing resin poised to help improve the quality of restorative care in digital dentistry. “Dental 3D printing solutions, especially for durable restorations, are becoming increasingly important.

3D printing 52

3D printing Fit Lead Time Additive manufacturing 52

Additive Manufacturing

OCTOBER 6, 2022

Burlingame, CA /October 3, 2022 – nano3Dprint announced the launch of its B3300 Dual-Dispensing 3D Printer. The printer’s unique, proprietary dual material dispensing system can print two different materials together to build combined material prints. “It For additional information, visit nano3Dprint at [link].

3D printing 52

3D printing Electronics Function Fit 52

Additive Manufacturing

NOVEMBER 8, 2022

02, 2022 — Vitro3D , a volumetric 3D printing company, has raised $1.3M Vitro3D’s innovative volumetric 3D printing method solves the current limitations of the photopolymer 3D printing industry, printing, in seconds, larger and more complex items through its novel cartridge-based geometry.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Additive Manufacturing

NOVEMBER 8, 2022

BELFAST, Northern Ireland & REHOVOT, Israel/November 2, 2022 — Med-tech startup Axial3D has announced the closing of a $15 million investment round led by a strategic investment of $10 million from Stratasys Ltd. Stratasys has estimated the opportunity for medical 3D printing at approximately $2.8

3D printing 52

3D printing Artificial Intelligence Additive manufacturing Automation 52

Additive Manufacturing

SEPTEMBER 22, 2022

21, 2022 — Boston Micro Fabrication (BMF) announced the opening of a new research and development center in San Diego, CA. The BMF Research Institute is being formed specifically to develop and incubate end-product ideas that are uniquely enabled by BMF’s micro 3D printing platform. BOSTON and SAN DIEGO, Sept.

3D printing 52

3D printing Additive manufacturing Prototype  Electronics 52

Additive Manufacturing

NOVEMBER 16, 2022

Essen/Marl, Germany/November 15, 2022 — Evonik launched three new INFINAM® photopolymers for industrial 3D applications, expanding the photo-resins product line launched last year for use in common UV-curing 3D printing processes such as SLA or DLP.

3D printing 52

3D printing Additive manufacturing Value chain Prototype  52

i4.0 today

OCTOBER 18, 2022

When it comes to history and awareness, polymer additive manufacturing leads the 3D printing industry. The first type of 3D printing to be invented in the 1980s was stereolithography, while thermoplastic filament extrusion holds the most public recognition amongst additive technologies. billion in 2033.

3D printing 52

3D printing Prototype  Additive manufacturing Consumer Goods 52

Additive Manufacturing

SEPTEMBER 13, 2022

13, 2022 — Polyplastics Co., has developed three-dimensional (3D) printing technology for production of DURACON (R) polyoxymethylene (POM) products. The technology, known as Material Extrusion (MEX), delivers physical properties close to those of injection-molded articles despite being 3D-printed.

3D printing 52

3D printing Function Additive manufacturing Manufacturing 52

Additive Manufacturing

OCTOBER 11, 2022

7, 2022 — LimaCorporate announced the FDA approval of a new shoulder platform focused on versatility and Operating Room efficiency. Both the glenoid baseplate and the humeral stem are fully 3D printed, leveraging the long legacy in additive manufacturing. Udine, Italy, Oct.

3D printing 52

3D printing Additive manufacturing Manufacturing 52