Additive Manufacturing

DECEMBER 17, 2022

15, 2022 — ABCorp announced the partnership with sport technology startup BATS-TOI to manufacture The Mercado, advanced multisport headgear using 3D print technology. ” Manufacturing will take place in ABCorp’s 125,000 sq. ” Manufacturing will take place in ABCorp’s 125,000 sq.

3D printing 98

3D printing Manufacturing Compliance Additive manufacturing 98

Additive Manufacturing

SEPTEMBER 28, 2022

Leanna Levine and her team at ALine specialize in the development of microfluidics solutions for customers in particular incorporating 3D printing for proof-of-concept and rapid prototyping of lab-on-chip devices. “We’ve The post Wearable Medical Devices and 3D Printing appeared first on Additive Manufacturing (AM).

3D printing 98

3D printing Prototype  Rapid prototyping Electronics 98

Additive Manufacturing

JULY 21, 2022

July 21, 2022– Terran Orbital Corporation has commissioned Fleet Space CENTAURI-5 payload; a satellite with 3D printed all metal patch antennas. The all-metal patch antennas are all entirely 3D printed – a world first. BOCA RATON, Fla./July This combination increases the satellite’s data capacity by 2.6

3D printing 98

3D printing Function Additive manufacturing Manufacturing 98

Additive Manufacturing

JANUARY 11, 2023

Additive manufacturing hardware solution providers were once again busy in 2022. Highlights included more options for printing bigger and smaller, printing electronics and composites, and a couple of open platforms to allow more material development for industry and researchers.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Composites 98

Additive Manufacturing

NOVEMBER 17, 2022

Krakow/November 17, 2022 — Krakow-based start-up Wimba is set to manufacture individual orthotic and prosthetic medical devices for dogs with HP Multi Jet Fusion (MJF) technology. . Founded in October 2022, Wimba aims to innovate the field of individual orthopaedic supplies by creating 3D products to restore animal mobility.

3D printing 92

3D printing Lead Time Function Additive manufacturing 92

Additive Manufacturing

OCTOBER 1, 2022

29, 2022 — SINTX Technologies, Inc. The device will be constructed of a 3D printed continuous carbon fiber (cCF) reinforced polyetherketoneketone (PEKK) plate with silicon nitride embedded into its surface. The trauma plate will also feature design customization through the 3D printing production method.

3D printing 97

3D printing Composites Form Additive manufacturing 97

Additive Manufacturing

JANUARY 13, 2023

Additive manufacturing materials are often the driver for new applications including production applications. In 2022, the AM community introductions of new materials for electronics, tissue fabrication, corrosive environments, consumer products, sporting equipment, and more. Take a look at the 2022 materials development.

Additive manufacturing 95

Additive manufacturing 3D printing Manufacturing Electronics 95

Additive Manufacturing

SEPTEMBER 6, 2022

SAN FRANCISCO — September 6, 2022 — Mantle , announced the commercial launch and availability of its metal 3D printing technology for toolmaking. The system simplifies how mold tool components are made and accelerates how manufacturers making molded parts – a $265 billion market – go from product idea to launch.

3D printing 98

3D printing Additive manufacturing Automation Manufacturing 98

AU Manufacturing

APRIL 11, 2023

The University of Technology Sydney (UTS) and BVN Architecture have received the Australian Sustainability Awards’ Green Building Material/Product Award for their 3D-printed air diffusion system dubbed, “Systems Reef 2 (SR2).”

3D printing 88

3D printing Manufacturing 88

Additive Manufacturing

JANUARY 16, 2023

Additive manufacturing software today does much more than support design and file prep for the process. 2022 saw more integrations with other systems, features and cloud-based approaches. QuinlyVision includes AutoCorrect 3D , to detect, automatically respond, and suggest solutions to 14 common print failures.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Smart manufacturing 98

Additive Manufacturing

NOVEMBER 30, 2022

21, 2022 — Triastek, Inc. , 21, 2022 — Triastek, Inc. , With a unique 3D dosage form design, T21 can reach the targeted colon segment of the GI tract, thus permitting use of a lower drug dose than the reference listed drug, which provides systemic exposure. NANJING, China, Nov.

3D printing 98

3D printing Form Pharmaceutical Additive manufacturing 98

Manufacturer's Monthly

JANUARY 15, 2023

Last year’s top prize for the 2022 Endeavour Awards landed with a truly deserving winner. Hypersonix is using scramjet technology and clean energy to form the basis for the manufacture of hypersonic vehicles. According to NASA, sound waves travel at around 340 metres per second on the ground.

3D printing 109

3D printing Manufacturing Composites Aerospace 109

Additive Manufacturing

OCTOBER 14, 2022

13, 2022 — ulrich medical USA, Inc. announced the FDA has given 510(k) clearance of its Flux-C 3D printed porous titanium cervical interbody device. Flux-C is manufactured using a 3D printing process called direct metal laser sintering (DMLS). LOUIS, Oct. Eric Lucas, Ph.D.,

3D printing 98

3D printing Additive manufacturing Manufacturing 98

Additive Manufacturing

JULY 29, 2022

July 27, 2022 — Infinite Materials Solutions, LLC launched AquaSys® General Purpose (GP), a water-soluble support material compatible with most polyesters. It is a direct replacement for polyvinyl alcohol (PVA) and showcases outstanding performance and print fidelity with standard polylactic acid (PLA)-type build materials.

3D printing 96

3D printing Additive manufacturing Sourcing Manufacturing 96

AU Manufacturing

SEPTEMBER 30, 2022

The global additive manufacturing sector has generated a total of $3 billion for the second consecutive quarter of 2022, according to SmarTech Analysis. Still, business leaders in the industry reaffirmed their expectations, noting additive’s value in innovating manufacturing during periods of an extended supply crisis. .

Additive manufacturing 84

Additive manufacturing 3D printing Supply Chain Manufacturing 84

Additive Manufacturing

JANUARY 19, 2023

Advanced manufacturing became more advanced in 2022 with additive manufacturing developments. Whether trying to print bigger with large-scale machines, smaller with micro 3D printing, or even printing or embedding electronics, more machines became accessible.

3D printing 52

3D printing Additive manufacturing Manufacturing Artificial Intelligence 52

AU Manufacturing

MARCH 10, 2023

A recent study by SkyQuest Technology Consulting has found that the 3D printing construction market is projected to surpass USD 397.5 With the positive figures, the construction 3D printing business is expected to grow as the market for construction equipment expands. by 2030 appeared first on Australian Manufacturing.

3D printing 75

3D printing Prototype  Manufacturing 75

Additive Manufacturing

OCTOBER 7, 2022

From patient-specific medical models and surgical guides to titanium implants, ready-to-wear prosthetics, and even bioprinted tissues, 3D printing is poised for major impact in the medical arena. There, 3D printing can get personal – truly, deeply, very literally personal. Why 3D Print in the Medical World?

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98

Additive Manufacturing

DECEMBER 13, 2022

AM News LIVE, EP20 – Monday, December 12th, 2022. 3D Systems Names Dr. Joe Zuiker and Dr. Brent Stucker as Executive Leaders. Lockheed Martin and Sintavia Team Up to Advance Metal Additive Manufacturing. Lockheed Martin and Sintavia Team Up to Advance Metal Additive Manufacturing. Special Guests: SJ Jones. Greg Waters.

3D printing 93

3D printing Additive manufacturing Aerospace Manufacturing 93

Additive Manufacturing

JULY 27, 2022

CHONGQING, China and BOSTON, July 26, 2022 — Boston Micro Fabrication (BMF) announced the successful closing of a Series C round of funding, totaling $43 million to drive micro additive manufacturing. Since its founding in 2016, BMF has been addressing the need: small, high precision parts made with additive manufacturing.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Prototype  98

Additive Manufacturing

AUGUST 30, 2022

An interview by Lauralyn McDaniel with Sam Onukuri, Head and Senior Fellow, Additive Manufacturing at Johnson & Johnson. It is no surprise, then, that the company has invested heavily across the years in medical 3D printing technologies to research and develop new products and solutions. Says Onukuri. Says Onukuri.

Additive manufacturing 96

Additive manufacturing 3D printing Manufacturing Pharmaceutical 96

Additive Manufacturing

OCTOBER 14, 2022

As we consider existing 2022 trends and opportunities for additive manufacturing, coupled with the recent CHIPS and Science Act news (latest from Department of Commerce), as an industry we have some exciting times ahead. manufacturing technologies and jobs , the White House published the U.S.

Additive manufacturing 105

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 105

Additive Manufacturing

SEPTEMBER 7, 2022

Leuven (Belgium) / September 7, 2022 — Materialise has acquired Identify3D, a company that develops software to encrypt, distribute and trace the flow of digital parts across complex supply chains. The acquisition of Identify3D makes Materialise’s CO-AM platform the most secure platform for distributed manufacturing. .

3D printing 98

3D printing Supply Chain Manufacturing Digital manufacturing 98

Additive Manufacturing

OCTOBER 26, 2022

AM Medical Summit: Where Medicine & Technology Meet to Transform Lives November 1–3, 2022. 0:21 – Panel 1 preview: QMS Approaches for Point-of Care 3D Printing Wednesday, November 2, 2022 1:30 PM to 2:15 PM · 45 min. (US/Central). Wednesday, November 2, 2022 11:00 AM to 11:45 AM · 45 min. (US/Central).

3D printing 98

3D printing Compliance Additive manufacturing Quality Management System 98

AU Manufacturing

NOVEMBER 3, 2022

The British Army has selected SPEE3D to showcase its WarpSPEE3D Printer as part of the US Army future Command’s Project Convergence 2022. . The company will demonstrate the capability of WarpSPEE3D printer’s deployable technology to 3D print metal parts in the field, which will be tested against various conditions.

3D printing 109

3D printing Additive manufacturing Supply Chain Logistics 109

Additive Manufacturing

DECEMBER 20, 2022

Workforce development is a vital topic in today’s additive manufacturing industry – as in every industry around the globe. With burgeoning technologies from automation to artificial intelligence coming into play in the manufacturing workflow, there’s already a lot for personnel to keep up with. The 3D Printing Workforce.

Additive manufacturing 92

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 92

AU Manufacturing

SEPTEMBER 20, 2022

Wire additive manufacturing company AML3D is expanding the scope of its 3D printed components supply for Boeing to further develop its strategic partnership with the aerospace company. . The new purchase agreement is on standard commercial terms. .

3D printing 59

3D printing Aerospace Quality Management System Supply Chain 59

Modern Machine Shop

DECEMBER 1, 2022

A donut-shaped machine tool component called the AKZ FDS adapter illustrates the increasingly intricate links between additive manufacturing (AM) and CNC machining. A version of this article was our cover story in the December 2022 issue of Modern Machine Shop. Here is the 3D printed adapter. It’s not that simple.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Form 98

Additive Manufacturing

SEPTEMBER 9, 2022

The ability to proactively use 3D digital data in the medical space really came to fruition with the start of additive manufacturing in the late 1980s. Use of 3D scan data of has also enabled the evolution of patient-specific 3D printed prosthetics over the last 30 years, and more recently, new inventions such as ‘dentures in a day’.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 98

AU Manufacturing

JANUARY 2, 2023

The additive manufacturing market has seen a continuous year-over-year growth for the third quarter of 2022, marking the fourth consecutive quarter that the entire AM industry saw revenue exceeding $3 billion. . The post AM market exceeds $3B revenue in Q3 2022 appeared first on Australian Manufacturing.

3D printing 79

3D printing Additive manufacturing Supply Chain Manufacturing 79

Manufacturer's Monthly

SEPTEMBER 6, 2022

Markforged is working with Australian Meat Processor Corporation (AMPC) and AMPC’s members to establish an Additive Manufacturing supply chain for Australian red meat processors. And it delivers improved performance and consistency to unlock the most demanding manufacturing and end-use applications. Strategy in F&B.

Additive manufacturing 97

Additive manufacturing 3D printing Beverage Supply Chain 97

AU Manufacturing

MARCH 26, 2023

The market for additive manufacturing (AM) and materials could reach USD 183 billion (AUD 275 billion) by 2032, a 21.2 per cent spike in CAGR, as a result of the growing popularity of 3D printing, according to a market report from Future Market Insights. per cent CAGR from 2022 to 2032. billion (AUD 71.8 billion) by 2032.

Additive manufacturing 82

Additive manufacturing 3D printing Manufacturing Industry 4.0 82

Additive Manufacturing

NOVEMBER 9, 2022

9, 2022 — Chromatic 3D Materials has launched ChromaScan, an additive manufacturing software for printing resin on non-planar surfaces. This new technology allows manufacturers to 3D print durable, flexible materials directly onto substrates of any shape including metal, plastic and textiles.

3D printing 105

3D printing Apparel Additive manufacturing Function 105

Manufacturer's Monthly

MARCH 17, 2024

Image: RSM RSM’s ‘ Securing Australia’s Manufacturing Industry ’ report explores the evolving landscape of the Australian manufacturing sector, transitioning from traditional industries into a more digitalised and automated industry, with insights from leaders and experienced business specialists.

Manufacturing 111

Manufacturing 3D printing Artificial Intelligence Beverage 111

Additive Manufacturing

MARCH 3, 2023

Barlassina (MB), March 3, 2023: Caracol, leader in industrial large format 3D printing, closes a €10.6 This round culminates the swift growth Caracol experienced in the past years, tripling its turnover in 2022. Venture SGR – already investors in Caracol.

3D printing 95

3D printing Additive manufacturing Aerospace Industry 4.0 95

Additive Manufacturing

NOVEMBER 20, 2022

AUSTIN, Texas/November 18, 2022 — AMFG Corp. With this new funding, AMFG will continue to help companies scale their additive manufacturing processes, further solidifying AMFG’s position at the forefront of the autonomous manufacturing revolution. is partnering with AMFG to improve workflow in its 3D printing business.

3D printing 98

3D printing Manufacturing Rapid prototyping Additive manufacturing 98

Additive Manufacturing

AUGUST 9, 2022

AM News Live, EP11 – Monday, August 8th, 2022. Million in Awards Polyspectra and Fortify Receive 3 Million to Advance 3D Printed Tooling. Million in Awards Polyspectra and Fortify Receive 3 Million to Advance 3D Printed Tooling. You can now subscribe to our NEW YouTube channel : [link].

3D printing 98

3D printing Additive manufacturing Manufacturing Supply Chain 98