Manufacturer's Monthly

JANUARY 4, 2023

Global printing technology company Memjet is boosting manufacturing in Australia with advanced robotics at its new factory in North Ryde, Sydney. . With new robotics and ultra-smart software, our manufacturing is competitive with Asia.” ” In July 2021, Memjet finished the design of its latest print engine.

Advanced manufacturing 97

Advanced manufacturing Manufacturing Supply Chain Prototype  97

Robotics Business Review

JANUARY 10, 2024

Source: IFR South Korea was the most automated country by robot density in 2022, according to the IFR. This shouldn’t come as a surprise, as South Korea was the most automated country in 2020 and 2021. In 2021, Singapore had a population of 5.45 It also has a smaller manufacturing industry. However, in 2021 the U.S.

Robotics 143

Robotics Robotics Automation Sourcing 143

Manufacturer's Monthly

SEPTEMBER 24, 2023

Townsville’s defence and aerospace industries will reach new heights with a new manufacturing plant set to get off the ground with Queensland Government support. Since the launch of IPP in 2021, more than $1.1 The post Funding for new advanced manufacturing facility in Townsville appeared first on Manufacturers' Monthly.

Advanced manufacturing 105

Advanced manufacturing Supply Chain Manufacturing Aerospace 105

Modern Machine Shop

SEPTEMBER 13, 2024

Source: AMT - The Association for Manufacturing Technology The world’s leading additive manufacturing (AM) trade show is launching a U.S. This will further raise awareness of the opportunities offered by additive manufacturing across the industry. based event in 2025 here in McCormick Place, the same venue as IMTS.

3D printing 52

3D printing Value chain Rapid prototyping Manufacturing 52

Donlouco

FEBRUARY 11, 2021

Donlouco is an Irish company based in Cork with manufacturing and sourcing capabilities in the far east. Donlouco are specialists in the manufacturing of complex parts that require a high level of engineering input so that parts meet the required standards for customers here in Europe.

Bill of Materials 52

Bill of Materials Sourcing Automotive Manufacturing 52

MEM

JULY 19, 2023

The company’s recent successes in heat recovery are a continuation of its 2021 pilot programme, which achieved energy reductions of 88% on a single pot still and showcased the potential if adopted across distillery operations.

Sourcing 52

Sourcing Form Manufacturing 52

Robotics Business Review

FEBRUARY 12, 2024

Automotive manufacturing will continue to drive North American robotics adoption, says A3. Source: ABB The Association for Advancing Automation, or A3, today released its quarterly and end-of-year report on robot orders in North America for 2023. The Ann Arbor, Mich.-based Automate 2024 will be from May 6 to 9 in Chicago.

Automotive 136

Automotive Robotics Robotics Artificial Intelligence 136

Robotics Business Review

NOVEMBER 2, 2024

Source: Meta AI GelSight, a developer of tactile technology, and Meta AI announced Digit 360, a tactile sensor for robotic fingers. This signifies the next stage of the partnership between the companies, which was established in 2021 with the launch of the Digit tactile sensor. Digit 360 is equipped with more than 18 sensing features.

Robotics 105

Robotics Robotics Sourcing Aerospace 105

Canadian Manufacturing

DECEMBER 8, 2022

We soft launched Legacy Plastic in 2021 and we are thrilled with the amount of interest that it has received from companies that want to incorporate recycled content into their products. Sourced plastic materials fall into three sources. Ocean plastics recovered from ocean recovery expeditions.

Sourcing 119

Sourcing Manufacturing 119

Robotics Business Review

NOVEMBER 20, 2024

Robot density in the manufacturing industry in 2023, according to the IFR. Source: IFR Factories worldwide are continuing to adopt more robots, according to the International Federation of Robotics, or IFR. Asia has 182 units per 10,000 people employed in manufacturing — an increase of 7.6%. This is an increase of 5.2%

Robotics 64

Robotics Robotics Automation Electronics 64

Robotics Business Review

MAY 9, 2024

Source: Techman Robotics Techman Robot launched its TM30S collaborative robot arm for palletizing this week. The cobot leverages AI to provide highly automated production efficiency in smart manufacturing. In 2021, OMRON bought a 10% stake in Techman Robot. The TM30S has a maximum payload of 35 kg (77.16 in) across six joints.

Robotics 116

Robotics Robotics Automation Smart manufacturing 116

Manufacturer's Monthly

NOVEMBER 22, 2022

Manufacturers’ Monthly explores the three pillars behind recent manufacturing investment attraction in the Hunter Valley’s Greater Cessnock. Cessnock City Council is playing its part in supporting local manufacturing. So for this reason manufacturing is a focus for our team.”. Food manufacturing: $80 million.

Manufacturing 94

Manufacturing Freight Supply Chain Logistics 94

ATS

MAY 12, 2023

Consider: In the decade from 2011 to 2021, the number of electric vehicles on the road increased by nearly 100-fold, from 22,000 in 2011 to over 2,000,000 in 2021. In just one year – from 2020 to 2021 – new sales of hybrids and fully electric vehicles nearly doubled, increasing from 308,000 to 608,000.

Manufacturing 52

Manufacturing Supply Chain Automotive Industry 4.0 52

ATS

FEBRUARY 9, 2024

Share Complex products require complex manufacturing processes, and that’s the essence of high-tech manufacturing. This blog answers the question, “What is high-tech manufacturing?” This is needed when the product requires great precision in manufacturing and the cost of failures or mistakes is high.

Manufacturing 59

Manufacturing Industry 4.0 Industry 4.0 Supply Chain 59

AU Manufacturing

SEPTEMBER 30, 2022

“The joint project aims to support the scaled manufacture of this hydrogen-containing graphene-like material. It expands upon the $2 million project and ARC linkage grant awarded to the team at Deakin University and HB11 Energy in 2021; during that project, fusion was successfully demonstrated utilising materials from Deakin University.

Advanced manufacturing 81

Advanced manufacturing Manufacturing Sourcing 81

Fabricating & Metal Work

OCTOBER 4, 2022

Manufacturers must produce lighter and more compact EV transmissions from tough materials such as low-alloy steels — and those that rely on traditional manufacturing processes risk falling behind. million new EVs were registered in Europe in the first six months of 2021, compared to 413 during the first half of 2020.

Manufacturing 98

Manufacturing Cycle time Lead Time Form 98

Robotics Business Review

AUGUST 9, 2024

Multiple sources told The Robot Report a funding round fell through at the last minute, which caused the company to lay off its staff and close its doors. Back in 2021, Gibbs said the goal was for ForgeOS 5 to do for robots what Windows did for PCs and Android did for smartphones. So where did things go wrong? and elsewhere.”

Robotics 138

Robotics Robotics Sourcing Automation 138

Modern Machine Shop

OCTOBER 10, 2024

Source: Ceratizit USA Inc. In 1998, Wilt moved into a sales position with a major cutting tool manufacturer and served customers in West Central Ohio. Wilt joined Ceratizit in 2021. Troy Wilt, managing director of Ceratizit USA, cutting tools division. Ceratizit USA Inc.

Aerospace 52

Aerospace Sourcing Manufacturing 52

AU Manufacturing

DECEMBER 13, 2022

Food tech company Harvest B has opened Australia’s first plant-based protein facility aimed at helping transform the country’s domestic food manufacturing capability. . It also touts a shelf life far superior to that of imported plant-based and locally sourced animal-based proteins, AMGC said in a press release. .

Supply Chain 83

Supply Chain Advanced manufacturing Sourcing Manufacturing 83

Dinesh Mishra

JANUARY 30, 2023

MAKERS AND MOVERS: STRATASYS INDIA Makers and Movers 2023 started off to a scintillating start with a highly informative and engaging conversation between Rajiv Bajaj, the Managing Director of Stratasys India & SEA, and our editor on additive manufacturing and how it is transforming the manufacturing industry. 34 million in 2022.

3D printing 52

3D printing Manufacturing Additive manufacturing Automotive 52

E&T

NOVEMBER 16, 2022

Estonia sold 1,583 heat pumps per 100,000 people in 2021 and Poland sold 259 per 100,000 people, 25 times and 4 times more than the UK’s 63 respectively. It’s driving down the costs to as little as £2,000 while driving up jobs for installers and manufacturers.”. For example, France has 3.1 million installed and Norway has 1.3

Sourcing 81

Sourcing Manufacturing 81

AU Manufacturing

JANUARY 19, 2023

Article by Michael Schwarz, MES/MOM Software Expert, AVEVA Supply chain disruptions, fluctuating costs, and new consumer purchasing habits are driving a dramatic need for increased agility and resilience in manufacturing industries. Post-pandemic, global consumers are increasingly embracing digital channels over brick-and-mortar stores.

Supply Chain 73

Supply Chain Artificial Intelligence Manufacturing Value chain 73

Gary Mintchell

APRIL 22, 2024

A 2021 study conducted by Deloitte and the Manufacturing Institute (MI) predicts that 2.1 million manufacturing positions will go unfulfilled by 2030, partly due to an increasing skills gap. It appears to be a pretty global situation that tech colleges are an important source for people with technical skills.

Automation 130

Automation Sourcing Manufacturing 130

AU Manufacturing

MARCH 20, 2023

million in 2021. The government said that critical minerals are used in the manufacturing of cutting-edge technology including computers, mobile phones, fibre-optic cables, semiconductors, and banknotes, as well as in the military, aerospace, and medical fields. million –up from $153.4 The findings also showed that at $82.7

Aerospace 84

Aerospace Sourcing Manufacturing 84

Robotics Business Review

OCTOBER 24, 2024

18, 2021, MOXIE generated 122 grams of oxygen, which is about what a small dog breathes in 10 hours, NASA said. It seems obvious that astronauts who could someday find themselves on Mars will need an oxygen source to breathe, but NASA has other uses in mind. After Perseverance landed on Mars on Feb.

Logistics 108

Logistics Robotics Robotics Automation 108

Frost & Sullivan Manufacturing

JULY 18, 2022

From the launch of its first electric scooter in the Indian market in August 2021 to the planned introduction of an all-electric sedan in 2023, Ola Electric is thinking big and bold. Source: Frost & Sullivan,2022. The company’s electric scooters are currently equipped with battery cells sourced from LG Chem in South Korea.

Manufacturing 52

Manufacturing Sourcing Supply Chain Form 52

Manufacturer's Monthly

NOVEMBER 21, 2022

Supply chain disruptions continue to plague global economies, especially within the manufacturing industry. In Australia, manufacturers with offshore operations are experiencing significant supply chain issues that threaten productivity and financial stability. Tackling supply chain uncertainty with 3D printing. reduced costs.

3D printing 114

3D printing Supply Chain Computer-Aided Design (CAD) Bottleneck 114

Fastener News Desk

OCTOBER 4, 2023

2, 2023 /PRNewswire/ — Economic activity in the manufacturing sector contracted in September for the 11th consecutive month following a 28-month period of growth, say the nation’s supply executives in the latest Manufacturing ISM ® Report On Business ®. A Manufacturing PMI ® above 48.7 Fiore , CPSM, C.P.M.,

Manufacturing 52

Manufacturing Supply Chain Beverage Apparel 52

Additive Manufacturing

APRIL 28, 2023

Rotterdam, The Netherlands – Raise3D , a leading manufacturer of 3D printers and printing solutions, announced substantial growth in its turnover and market share, both in printers and in filament sales, in line with what has been publicly released by CONTEXT.

3D printing 52

3D printing Manufacturing Additive manufacturing Supply Chain 52

Gary Mintchell

AUGUST 3, 2022

Recently I interviewed Tabitha Upshaw, senior director of Brand, Reputation and Impact to learn more about the results reported in the 2021 Corporate Impact report just announced about a month ago. of electricity sourced from renewables, plus 113,542 square feet of new buildings and remodels designed to LEED/WELL standards.

Supply Chain 130

Supply Chain Form Sourcing Manufacturing 130

Robotics Business Review

APRIL 25, 2024

Source: Outrider Between the automated warehouse and self-driving long-haul vehicles, there is the opportunity to add robotics to yard management. Source: Outrider Outrider patent efforts advance Outrider now has 11 issued patents and over 50 pending patents in the U.S. Outrider Technologies Inc. and internationally.

Automation 127

Automation Supply Chain Logistics Robotics 127

Robotics Business Review

JUNE 14, 2024

Source: Interact Analysis Overall global industrial robot shipment volumes exceeded 500,000 units in 2023, Interact Analysis reports. The market saw record highs in 2021, and lows in revenues and shipments in 2023. The industrial robot market is expected to grow by ~3.7% per year between 2024 and 2028.

Robotics 119

Robotics Robotics Automotive Supply Chain 119

Robotics Business Review

APRIL 23, 2024

Rockwell works with partners to streamline automated manufacturing. Source: Business Wire Rockwell Automation yesterday announced that it is working with Microsoft “to enable intelligent factories by simplifying complexity and helping empower customers to achieve sustainability goals and operational excellence.”

Automation 122

Automation Manufacturing Execution System (MES) Robotics Robotics 122

Robotics Business Review

FEBRUARY 1, 2024

Source: NASA Virtual Incision’s MIRA surgical robot system has made it to the International Space Station (ISS). Source: Virtual Incision MIRA includes a small, self-contained surgical device inserted through a single midline umbilical incision in the patient’s abdomen. 30, 2024 with the spaceMIRA from Virtual Incision onboard.

Robotics 124

Robotics Robotics Cargo Sourcing 124

Fastener News Desk

MAY 4, 2023

There has always been strong demand for sealing products across UK manufacturers. Bringing EAP under TFC will help us better serve our UK manufacturing customers, supplying seals directly from an in-house UK source. Website: www.afcind.com In April 2021 AFC Industries was acquired by Bertram Capital, based in Foster City CA.

Supply Chain 52

Supply Chain Sourcing Manufacturing 52

HGR Inc.

NOVEMBER 18, 2022

According to a widely cited industry figure from Deloitte, in their report on smart factories, even during the best of times – before COVID caused disruption – unplanned downtime costs industrial manufacturers an estimated $50 billion annually. Manufacturing Tomorrow | Nov 14, 2022 | Manufacturing Tomorrow. Harbour Results Inc.

Manufacturing 79

Manufacturing Supply Chain Industry 4.0 Industry 4.0 79

Automation Mag

NOVEMBER 14, 2022

The companies launched their collaboration in 2021. Since then, they have been working together to leverage the power of robotic solutions to help businesses increase the speed of innovation and maximize their manufacturing efficiencies. Thus, fewer components are needed on the manufacturing floor.

Automation 98

Automation Robotics Robotics Supply Chain 98