Dinesh Mishra

FEBRUARY 2, 2023

The M&M Board had undertaken that MEML would merge into M&M with effect from April 1, 2021, to synergize EV development, manufacturing, and sales operations. Mumbai, February 2, 2023 : Mahindra Electric Mobility Limited (MEML) is now officially merged into the parent company, Mahindra and Mahindra Limited (M&M).

Cargo 52

Cargo Logistics Manufacturing Automotive 52

MEM

JULY 21, 2023

AntwerpXL is once again looking for the top forty breakbulk, project cargo and heavy lift professionals under the age of 40. For the third year running, Deloitte conferred “Best Managed Company” status on Easyfairs in 2021. appeared first on Manufacturing & Engineering. XL 40 Under 40 Returns!

Cargo 52

Cargo Manufacturing 52

Manufacturer's Monthly

MARCH 13, 2023

Billy Friend sat down with founder and director Joe Bryant to learn about the company’s ambitions to propel Australia into the upper echelon of advanced composites manufacturing. Upon his return, Bryant eventually led Airbus Australia’s only composites manufacturing plant, and later on Airbus’ NH90 final assembly and flight line.

Composites 98

Composites Aerospace Supply Chain Manufacturing 98

Plastics News

JANUARY 30, 2023

The leading theory is they've spilled from shipping containers, similar to a spill of 87 containers of plastic from a cargo freighter off the coast of Sri Lanka in May 2021. The trade group Manufacturers Association for Plastics Processors came out Jan. No one seems to know the source of the pellets.

Cargo 72

Cargo Sourcing Manufacturing 72

Frost & Sullivan Manufacturing

MARCH 31, 2024

million units in 2021 to 2.4 This was attributed to, among factors, decelerated economic growth, reduced trade transactions, subdued manufacturing activities, pandemic effects, rising crude oil prices, a volatile real estate sector, stricter emission standards, and shrinking market demand. in 2022 from 60.1% of share in 2022.

Freight 52

Freight Logistics Cargo Supply Chain 52

i4.0 today

APRIL 28, 2023

The drive to increase the efficiency of international shipping relies on high-performance cranes to transfer containerized cargo quickly and safely from ship to shore. Much of the company’s work is based on providing sensors to enable cranes to move cargo from ships to automated guided vehicles (AGVs). Today Magazine.

Automation 52

Automation Cargo Electronics Sourcing 52

E&T

NOVEMBER 8, 2022

Early in 2021, a team of 100 experts from across the UK launched a one-year intensive research project to investigate the best route to zero-emission commercial flight. The strategy involves pursuing promising avenues for R&D across all types of fuel and technology, and then picking a potential winner based on results.

Freight 81

Freight Cargo Composites Prototype  81

Frost & Sullivan Manufacturing

JANUARY 19, 2023

India sold 1,710 electric two-wheelers per day in 2022, registering 336% growth, compared to 2021. in 2021 to 4.05% in 2022. Our Perspective The Indian electric two-wheeler market has started to register significant year-on-year growth. Market penetration increased from 1.1% 100 per liter mark in 2022.

Cargo 52

Cargo Automotive 52

Dinesh Mishra

NOVEMBER 12, 2024

The new showroom, located in New Delhi will showcase Omega Seiki’s Cargo and Passenger Electric Two and Three Wheeler models offering customers a first-hand experience of cutting-edge EV technology. The first showroom of the company was inaugurated in Pune in August 2021. About Omega Seiki Pvt. Omega Seiki Pvt.

Cargo 52

Cargo Energy Solutions Manufacturing 52

Frost & Sullivan Manufacturing

NOVEMBER 20, 2022

Saudi Arabia intends on supporting this logistics advancement through its Global Supply Chain Resilience Initiative, which was initiated in 2021. By offering a sustainable manufacturing option, the country will not only strengthen its industrial base, but also integrate with the global supply chain.

Supply Chain 52

Supply Chain Logistics Freight Artificial Intelligence 52

Frost & Sullivan Manufacturing

NOVEMBER 20, 2022

Saudi Arabia intends on supporting this logistics advancement through its Global Supply Chain Resilience Initiative, which was initiated in 2021. By offering a sustainable manufacturing option, the country will not only strengthen its industrial base, but also integrate with the global supply chain.

Supply Chain 52

Supply Chain Logistics Freight Artificial Intelligence 52

Manufacturer's Monthly

MARCH 14, 2023

Manufacturers’ Monthly sits down with AIR Hub Director Dr. Adriano Di Pietro to uncover how the AIR Hub’s collaboration between industry and research leverages state of the art facilities and expert teams to produce novel composite structures for the next generation of air mobility. We needed something like that again.”

Aerospace 90

Aerospace Composites Prototype  Industry 4.0 90

Additive Manufacturing

JANUARY 3, 2023

The facility was responsible for manufacturing cargo planes and bombers. At the time, it was one of the largest commercial planes manufactured and took flight in 1970. At the time, it was one of the largest commercial planes manufactured and took flight in 1970. How Additive Manufacturing Is Applied.

3D printing 52

3D printing Aerospace Additive manufacturing Cargo 52

MEM

APRIL 12, 2023

After Gareth sadly passed away in 2021, directors Paul Davies, Paul Buck and Carl Wilkinson completed a management buyout, acquiring the business from Gareth’s family. Sadly, after a short illness he passed away in 2021, at the age of only 41. Paul Davies moved from finance director to managing director and chairman.

Cargo 52

Cargo Pharmaceutical Fit Manufacturing 52

E&T

DECEMBER 5, 2022

According to the International Energy Agency (IEA), worldwide subsidies for electric vehicles (EVs) doubled in 2021 to almost $30bn. The IEA calculated that EVs in Europe and the US worked out as much as 50 per cent more expensive than petrol-driven equivalents in 2021. This is not good news for EVs. Why is ammonia better?

Logistics 75

Logistics Robotics Robotics Cargo 75

SMMT

OCTOBER 13, 2022

Going hand-in-hand with the large number of new electric vehicles available, manufacturers have recently unveiled a variety of new electric axle drives – or eAxles – for a wide range of weight classes. For example, Saietta recently revealed its high-tech fully integrated, modular eAxle Concept, developed for heavy-duty vehicle manufacturers.

Prototype  52

Prototype  Fit Cargo Electronics 52

Frost & Sullivan Manufacturing

JUNE 6, 2024

Paired together with Motive’s AI Omnicam for side, rear, and cargo monitoring, the technology provides 360-degree visibility around vehicles and other assets. The Motive AI Dashcam detects more than 15 unsafe behaviors, boasts an Ambarella CV22 processor for edge computing, and offers the ultrawide 1440p HD video at 30 fps.

Cargo 52

Cargo Function Logistics Benchmarking 52

Frost & Sullivan Manufacturing

MARCH 18, 2024

Higher Efficiency, Lower Emissions, Multiple Fuels (HELM) is the new mantra as company launches advanced clean diesel X15 engine In 2022, following the waning of the pandemic, global emissions from passenger and cargo transport grew 3% from 2021 levels. At an annual average rate of 1.7%

Form 52

Form Cargo Logistics Fit 52

Frost & Sullivan Manufacturing

DECEMBER 20, 2022

Autonomous eVTOL cargo drones are already in use for middle mile delivery logistics operations. They bring with them proven capabilities in electrification and manufacturing. At CES 2021, GM unveiled two futuristic Cadillac concepts, an electric shuttle, and an autonomous VTOL drone.

Cargo 52

Cargo Value chain Automotive Prototype  52

Canadian Manufacturing

MARCH 3, 2023

The 21-year-old Emily Carr University film student has a car to haul people or cargo, but his “wheel” is his main means of commuting to school and getting around the city. They include Vancouver and other Lower Mainland cities. The scooters must meet specifications related to power, speed, wheel size and braking.

Cargo 40

Cargo Compliance Manufacturing 40

E&T

DECEMBER 2, 2022

In fact, as many electric were sold every week in 2021 as the total amount sold in the whole of 2012 (120,000), the IEA reports. Their PEM fuel cell can be 3D-printed or assembled from cheap printed circuit boards, which would enable manufacturing to be scaled up easily. Electric car sales are accelerating.

Logistics 85

Logistics 3D printing Supply Chain Form 85

Fastener News Desk

AUGUST 21, 2024

seaports on the East Coast and Gulf of Mexico could back up cargo there for weeks or even months, shipping experts say. Manufactures and distributes fasteners that are used with industrial applications. 5000’s Best-Workplaces in 2021 Threadheads and FasteNerds Tune in to Fully Threaded Radio Episode 203 – More Threads.

Beverage 52

Beverage Fit Cargo Form 52

Dinesh Mishra

JULY 19, 2022

The 39-year-old has worked in Mannheim for seven years and was made plant manager in September 2021. Coca-Cola in Germany avoids further emissions with its close-knit production and distribution network that manufactures and supplies beverages on a mostly regional basis. billion liters (2021) is the biggest beverage company in Germany.

Beverage 52

Beverage Consumer Goods Cargo Freight 52

Frost & Sullivan Manufacturing

OCTOBER 30, 2023

Previously known as the Tokyo Motor Show (TMS), the biennial event which has since been rebranded JMS 2023 makes a strong comeback following the cancelation of the 2021 edition because of the Covid-19 pandemic. Interestingly, foreign manufacturers have been entering this space.

Cargo 52

Cargo Supply Chain Automotive Manufacturing 52

Frost & Sullivan Manufacturing

JULY 15, 2024

The company, which has been using Samsara’s services since 2021, has been able to better manage its fleet and train its 125 drivers to reach an average safety score of 92 in 2023, compared to 54 in 2020. Its unique selling point (USP) is its functionality and wide application range.

Compliance 52

Compliance Logistics Cargo Form 52

Frost & Sullivan Manufacturing

JULY 15, 2024

The company, which has been using Samsara’s services since 2021, has been able to better manage its fleet and train its 125 drivers to reach an average safety score of 92 in 2023, compared to 54 in 2020. Its unique selling point (USP) is its functionality and wide application range.

Compliance 52

Compliance Logistics Cargo Form 52

Frost & Sullivan Manufacturing

JULY 15, 2024

The company, which has been using Samsara’s services since 2021, has been able to better manage its fleet and train its 125 drivers to reach an average safety score of 92 in 2023, compared to 54 in 2020. Its unique selling point (USP) is its functionality and wide application range.

Compliance 52

Compliance Logistics Cargo Form 52

Mold Making Technology

NOVEMBER 2, 2023

At the very least, use a mold design checklist (see Plastics Technology ’s August 2021 article, “ 80 Questions Moldmakers Should Ask Themselves and Their Customers” ). They give you a design for manufacturing and a flow analysis at no additional cost. The more people that review a new mold design, the better.

Lead Time 59

Lead Time Cargo Fit Automation 59

AU Manufacturing

FEBRUARY 27, 2023

The first shipment of spodumene (lithium) concentrate from NAL is expected in July 2023, with four additional cargoes planned for the first half of fiscal 2024. The move comes on the heels of Sayona’s 2021 acquisition of the nearby NAL operation, which is set to restart spodumene (lithium) production in March 2023.

Cargo 66

Cargo Sourcing Manufacturing 66

Canadian Manufacturing

JULY 6, 2023

In a Transport Canada study of the five-day Montreal port strike in 2021, the government projected the economic cost could reach up to $100 million a week. Antweiler based his $250-million estimate on that analysis, with the value of cargo moved at B.C. ports up to three times higher than at the Port of Montreal.

Cargo 45

Cargo Automation Manufacturing Supply Chain 45

Fastener News Desk

SEPTEMBER 25, 2024

1, a move that would shut down ports that handle about half the nation’s cargo from ships. Heavier vehicular traffic would be likely at key points around the country as cargo was diverted to West Coast ports, where workers belong to a different union not involved in the strike. East and Gulf Coasts are threatening to strike on Oct.

Automation 52

Automation Freight Cargo Supply Chain 52

Robotics Business Review

OCTOBER 4, 2024

“The team at our new manufacturing facility is ready to allocate a significant number of vehicles for the Waymo One fleet as it continues to expand. In addition, the vehicle’s interior will offer additional legroom, headroom, and rear cargo space for a comfortable riding experience, said Hyundai.

Cargo 67

Cargo Robotics Robotics Sourcing 67

Canadian Manufacturing

MAY 2, 2023

Cargo volumes at Canada’s largest port fell by three per cent last year as the global economy began to show signs of a slowdown. Last year, overall cargo volume fell to 141.4 million tonnes in 2021. million tonnes from 146.5 Construction and materials traffic jumped 15 per cent.

Supply Chain 45

Supply Chain Cargo Manufacturing 45

Canadian Manufacturing

AUGUST 28, 2023

“With creeping thistle on the quarantine pest list, Canadian grain cargoes faced the risk of commercial penalty. In 2021, Canadian wheat exports to Vietnam fell to just over 20,000 tonnes from over 200,000 tonnes annually prior to the restriction. ”

Cargo 40

Cargo Supply Chain Manufacturing 40

Canadian Manufacturing

AUGUST 2, 2022

Air Canada plans to increase its full year 2022 ASM capacity by about 150 per cent from 2021 ASM levels (or about 74 per cent of 2019 ASM levels). Passenger revenues of $3.441 billion increased about eight times from the second quarter of 2021. MONTREAL — Air Canada reported its second quarter 2022 financial results on Aug.

Cargo 119

Cargo Aerospace Manufacturing 119

Canadian Manufacturing

AUGUST 22, 2022

But containers sat on its docks for nearly six days on average, almost twice as long as in 2019 and a 41 per cent increase from 2021. Meanwhile cargo vessels sat at anchor for 9.6 And maybe it is a critical part for a manufacturing operation.” “You get to a point where one more drop and you start to overflow.

Supply Chain 81

Supply Chain Freight Cargo Bottleneck 81

Canadian Manufacturing

APRIL 21, 2023

experienced in late 2021 that contributed to port cargo backlogs well into 2022. The project will deliver economic benefits, including over 18,000 jobs during construction; over 17,300 ongoing jobs; an estimated $3 billion in GDP annually once built; and $631 million in tax revenue to support services for Canadians.

Cargo 52

Cargo Supply Chain Manufacturing 52