i4.0 today

AUGUST 16, 2022

Henkel has joined the Additive Manufacturer Green Trade Association (AMGTA) to promote the environmental benefits of Additive Manufacturing (AM) throughout all stages of the ecosystem. The AMGTA seeks to promote the adoption of AM as an alternative to traditional manufacturing and educate the public and industry about these benefits.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Form 98

Additive Manufacturing

AUGUST 30, 2022

An interview by Lauralyn McDaniel with Sam Onukuri, Head and Senior Fellow, Additive Manufacturing at Johnson & Johnson. With revenues of $94 billion in 2021, Johnson & Johnson is one of the world’s most well-known healthcare companies. He points out 4 key value drivers for using additive manufacturing in healthcare.

Additive manufacturing 96

Additive manufacturing 3D printing Manufacturing Pharmaceutical 96

Additive Manufacturing

SEPTEMBER 9, 2022

The ability to proactively use 3D digital data in the medical space really came to fruition with the start of additive manufacturing in the late 1980s. Use of 3D scan data of has also enabled the evolution of patient-specific 3D printed prosthetics over the last 30 years, and more recently, new inventions such as ‘dentures in a day’.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 98

AU Manufacturing

AUGUST 16, 2022

ASX-listed manufacturing company 3D Metalforge (3MF) has secured the American Bureau of Shipping (ABS) license for additive production of metal parts. . The license was granted following a rigorous process that involved site inspection, test sample printing, and a thorough examination of the company’s process and procedures.

3D printing 83

3D printing Additive manufacturing Compliance Manufacturing 83

AU Manufacturing

SEPTEMBER 20, 2022

Wire additive manufacturing company AML3D is expanding the scope of its 3D printed components supply for Boeing to further develop its strategic partnership with the aerospace company. . The new purchase agreement is on standard commercial terms. .

3D printing 59

3D printing Aerospace Quality Management System Supply Chain 59

Design World

MARCH 20, 2023

ARRIS — manufacturer enabling high-performance composites at scale with new design latitudes for mass-market consumer products, transportation, and industrial applications — recently signed a contract manufacturing partner (CM) to further increase production part capacity.

Composites 195

Composites Manufacturing 3D printing Additive manufacturing 195

AU Manufacturing

JANUARY 24, 2023

The Innovative Manufacturing Cooperative Research Centre (IMCRC) has announced the commercialisation of a novel high-strength aluminium wire that could transform the way complex metal objects are manufactured. Our patented Wire Additive Manufacturing (WAM®) 3D metal printing process can produce medium to large objects.

3D printing 85

3D printing Manufacturing Additive manufacturing Logistics 85

i4.0 today

FEBRUARY 17, 2023

For a long time, 3D construction printing has been seen as a possible solution to the escalating affordable housing crisis. Proponents of the technology claim, that when 3D printing projects in construction are carried out at scale, the advantages of the technology become clear.

3D printing 52

3D printing Sourcing Robotics Robotics 52

AU Manufacturing

FEBRUARY 14, 2023

A recent study by SmarTech Analysis titled, “ 3D Printing Jewelry Markets 2023: Market Study and Forecast” has found that the market for 3D printed jewellery will grow at a 10-year CAGR of 10 per cent from 2021 to 2031, from $489 million (AUD $701 million) in 2017 to $989 million (AUD $1.4

3D printing 52

3D printing Additive manufacturing Manufacturing 52

AU Manufacturing

SEPTEMBER 13, 2022

As such, for various applications, 3D printing is a good fit, allowing the manufacture of impossibly complex geometries in a variety of robust materials in a speedy and cost-effective fashion. I design and manufacture parts for the automotive aftermarket and electric vehicle conversion industries.

3D printing 52

3D printing Automotive Prototype  Additive manufacturing 52

Additive Manufacturing

JULY 21, 2022

Munich, July 20, 2022 — AM Ventures announced final closing of its venture capital fund focused on industrial 3D printing. The VC firm will use the funds to expand its strong portfolio of 17 companies and to further boost the industrial 3D printing industry. The oversubscribed fund closes at EUR 100M hard cap.

3D printing 52

3D printing Additive manufacturing Supply Chain Manufacturing 52

Additive Manufacturing

DECEMBER 4, 2022

/November 29, 2022 – Purdue University researchers have developed a patent-pending method to add particles to filament and disperse them evenly through a traditional fused deposition modeling, or FDM, 3D printer, which will aid industry in manufacturing functional parts. Brittany Newell and Jose M.

3D printing 52

3D printing Function Prototype  Additive manufacturing 52

AU Manufacturing

SEPTEMBER 30, 2022

The global additive manufacturing sector has generated a total of $3 billion for the second consecutive quarter of 2022, according to SmarTech Analysis. Still, business leaders in the industry reaffirmed their expectations, noting additive’s value in innovating manufacturing during periods of an extended supply crisis. .

Additive manufacturing 84

Additive manufacturing 3D printing Supply Chain Manufacturing 84

Additive Manufacturing

FEBRUARY 16, 2023

New era of 3D printing in-situ inspection goes beyond monitoring, enabling reduced part costs – and now available for early adopters. Real-Time Inspection Phase3D emerged as a spinout from the University of California in 2021 with a real-time quality monitoring system. Learn more at phase-3d.com.

3D printing 52

3D printing Additive manufacturing Logistics Manufacturing 52

AU Manufacturing

MARCH 21, 2023

The additive manufacturing (AM) market is predicted to grow at a rapid pace, by roughly 23 per cent, to $13.5 The analysis found that since 2020, the usage of 3D printing in the medical sector has not been the important driving force of the overall industry’s development that it once was. billion (AUD 20.2

Additive manufacturing 76

Additive manufacturing 3D printing Manufacturing Aerospace 76

Additive Manufacturing

JULY 29, 2022

“This is an exciting new capability that could unlock new drug development processes in space that could translate to improved pharmaceuticals and make a positive impact on human health,” said John Vellinger, Redwire’s Executive Vice President of In-Space Manufacturing and Operations. JACKSONVILLE, Fla./July

Pharmaceutical 96

Pharmaceutical Manufacturing 3D printing Additive manufacturing 96

Additive Manufacturing

AUGUST 1, 2022

NEW YORK (August 1, 2022) – An estimated six million patients have benefitted directly or indirectly from medical applications of additive manufacturing (AM) and 3D printing – from orthopedic and cranial implants to surgical guides and instruments to dental restorations and external prosthetics.

3D printing 97

3D printing Supply Chain Manufacturing Additive manufacturing 97

Mold Making Technology

SEPTEMBER 11, 2023

A 3D-printed tool for metal injection molding being produced on an ExAM 255. The multi-material ExAM 255 3D printing system enables high build speeds for high-precision 3D components manufacture. The goal of this joint project was to use 3D printing to manufacture a tool for MIM with near-contour cooling.

3D printing 52

3D printing Cycle time Function Composites 52

Additive Manufacturing

JANUARY 3, 2023

It all starts at sun-soaked Space Beach in Long Beach, California, where 3D printing, materials development, innovation and curiosity collide. The facility was responsible for manufacturing cargo planes and bombers. At the time, it was one of the largest commercial planes manufactured and took flight in 1970.

3D printing 52

3D printing Aerospace Additive manufacturing Cargo 52

Additive Manufacturing

FEBRUARY 8, 2023

Free report covering new developments and community survey results for medical additive manufacturing/3D printing now available. The key trend for 2022 was growth – significant growth – for the medical additive manufacturing/3D printing community.

3D printing 40

3D printing Additive manufacturing Manufacturing Form 40

Additive Manufacturing

JULY 20, 2022

Designed as the world’s first fully reusable, entirely 3D printed rocket, Terran R is pioneering a new class of reusable launch vehicles that will open new opportunities for space exploration and scientific research. To date, Relativity has signed a total of five customers for Terran R totaling more than $1.2B

3D printing 98

3D printing Supply Chain Logistics Aerospace 98

Additive Manufacturing

SEPTEMBER 14, 2022

Patient-specific devices are nearing standard of care in several areas and many hospitals are eager to take the near automated workflows being sold for general purposes by 3D Printing companies in-house to produce these perfectly matched parts more efficiently for their patients.

3D printing 97

3D printing Additive manufacturing Automation Manufacturing 97

AU Manufacturing

OCTOBER 12, 2022

Cutting-edge Australian 3D printing building and construction company, Luyten , has launched the world’s largest mobile 3D smart AI-powered concrete printer for the building and construction industry. . This is the first 3D-printed indigenous housing project in the world. . Media Release. About Luyten.

3D printing 87

3D printing Artificial Intelligence Robotics Robotics 87

Fastener News Desk

MARCH 29, 2024

Written by: Matt Kremenetsky AJ Strandquist is a different kind of additive manufacturing (AM) CEO. Having risen up through Würth Industry ’s core fastener and assembly business for nearly a decade, Strandquist became a founder and the CEO of Würth Additive Group (WAG) when the company got off the ground in 2021.

3D printing 59

3D printing Bill of Materials Made-to-spec Supply Chain 59

Additive Manufacturing

NOVEMBER 10, 2022

Charlotte, NC, US/November 10, 2022 — Axtra3D launches Lumia X1 and Revox X1 3D printers that are set to propel additive manufacturing to its next levels of productivity and performance. Meet the technologies that transcend limits: Familiar SLA, DLP, and LCD 3D printing technologies all require tradeoffs.

3D printing 98

3D printing Sourcing Additive manufacturing Manufacturing 98

Automation Mag

NOVEMBER 22, 2023

The University of Waterloo’s Multi-Scale Additive Manufacturing (MSAM) Lab opened its doors to a new facility for next-generation metal 3D-printing research. Launched in 2017, Waterloo’s MSAM Lab has reportedly become the largest metal additive manufacturing (AM) academic facility in Canada.

Additive manufacturing 84

Additive manufacturing 3D printing Manufacturing Prototype  84

i4.0 today

SEPTEMBER 5, 2022

The Manufacturing & Supply Chain Conference & Exhibition , which is being held at the SEC Glasgow on the 13 th October 2022, will serve as a national forum for manufacturers and operators involved throughout the associated supply chains from across Scotland to gather to discuss pressing issues facing the industry.

Supply Chain 97

Supply Chain 3D printing Manufacturing Industry 4.0 97

Automation Mag

JUNE 28, 2023

Hexagon has completed the acquisition of CADS Additive, a fast-growing provider of specialized software that helps companies prepare designs for metal additive manufacturing (AM). Hexagon notes in a press statement that CADS Additive simplifies the process of 3D printing on powder bed fusion (PBF) machines.

Additive manufacturing 59

Additive manufacturing Computer-Aided Design (CAD) Computer-Aided Manufacturing (CAM) 3D printing 59

Additive Manufacturing

DECEMBER 15, 2022

The additive manufacturing (AM) industry is growing rapidly, yet the industry is facing a global shortage of workers. The 2022 AM Salary Survey Report by Alexander Daniels Global estimated that in 2021, the AM sector had 8,261 job openings in the US. For the entire manufacturing industry, this could mean more than 2.1

Additive manufacturing 98

Additive manufacturing Manufacturing 3D printing Form 98

Manufacturer's Monthly

JANUARY 4, 2023

Global printing technology company Memjet is boosting manufacturing in Australia with advanced robotics at its new factory in North Ryde, Sydney. . With new robotics and ultra-smart software, our manufacturing is competitive with Asia.” ” In July 2021, Memjet finished the design of its latest print engine.

Advanced manufacturing 98

Advanced manufacturing Manufacturing Supply Chain Prototype  98

AU Manufacturing

MARCH 23, 2023

London-based 3D printing company 3DPRINTUK has earned a spot on the Financial Times 1000 Fastest Growing Companies in Europe list, with an absolute growth rate of 171.6 London-based 3D printing company 3DPRINTUK has earned a spot on the Financial Times 1000 Fastest Growing Companies in Europe list, with an absolute growth rate of 171.6

3D printing 61

3D printing Supply Chain Manufacturing Additive manufacturing 61

AU Manufacturing

JANUARY 25, 2023

In a bid to achieve better part repeatability with advanced metal additive manufacturing (AM) across the globe, a network of contract manufacturers has collaborated and obtained significant results in printing the same print file of an industrial part using Velo3D Sapphire systems in six locations.

3D printing 90

3D printing Additive manufacturing Function Manufacturing 90

Modern Machine Shop

SEPTEMBER 13, 2024

Source: AMT - The Association for Manufacturing Technology The world’s leading additive manufacturing (AM) trade show is launching a U.S. This will further raise awareness of the opportunities offered by additive manufacturing across the industry. However, it is more than just 3D printing.

3D printing 52

3D printing Value chain Rapid prototyping Manufacturing 52

Additive Manufacturing

JANUARY 5, 2023

As the community finds more applications, improves processes, and looks for new technology, solution providers are working to support additive manufacturing growth through collaboration, investment, and funding. The funds will be used for process and material development of additive manufacturing of RF (radio frequency) devices.

Additive manufacturing 59

Additive manufacturing 3D printing Manufacturing Digital manufacturing 59

AU Manufacturing

JANUARY 2, 2023

The additive manufacturing market has seen a continuous year-over-year growth for the third quarter of 2022, marking the fourth consecutive quarter that the entire AM industry saw revenue exceeding $3 billion. . The post AM market exceeds $3B revenue in Q3 2022 appeared first on Australian Manufacturing.

3D printing 79

3D printing Additive manufacturing Supply Chain Manufacturing 79

Additive Manufacturing

SEPTEMBER 1, 2022

As physicians and other healthcare professionals work to advance patient care, becoming more personalized and precise, additive manufacturing has demonstrated to become an enabler. Medical 3D printing professionals expect growth in nearly every application area over the next year. What are these patient-specific devices?

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 52

AU Manufacturing

AUGUST 30, 2022

a leading metal additive manufacturing technology company for mission-critical parts, today announced Hermeus , a company developing hypersonic aircraft for defense and commercial applications, has acquired an original Sapphire and a large-format Sapphire XC that is designed for high-volume production. Media Release by Velo3D. About Velo3D.

3D printing 74

3D printing Additive manufacturing Supply Chain Aerospace 74