AU Manufacturing

DECEMBER 7, 2022

Additive Assurance , a leader in quality assurance for additive manufacturing, has announced the successful completion of a $4.1 Additive Assurance has developed AMiRIS, a world-leading solution for quality assurance of 3D-printed metal parts, based on technology originally developed at Monash University.

3D printing 83

3D printing Additive manufacturing Value chain Aerospace 83

Manufacturer's Monthly

JUNE 12, 2024

Image: Maple Glass Printing Nick Birbilis, the co-founder of Maple Glass Printing, spoke to Manufacturers Monthly’ and explained how his company created novel glass 3D printing technology, and successfully commercialised it. Maple Glass Printing (MGP) was first conceived by a relatively simple idea.

3D printing 98

3D printing Prototype  Sourcing Manufacturing 98

Additive Manufacturing

JANUARY 5, 2023

As the community finds more applications, improves processes, and looks for new technology, solution providers are working to support additive manufacturing growth through collaboration, investment, and funding. The funds will be used for process and material development of additive manufacturing of RF (radio frequency) devices.

Additive manufacturing 59

Additive manufacturing 3D printing Manufacturing Digital manufacturing 59

Manufacturer's Monthly

DECEMBER 11, 2023

With 3D printing beginning to finally have the impact on manufacturing that was expected some 30 years ago, manufacturers remain wary of truly capitalising on it. Fatigue failures happen for two main reasons in additive manufactured parts according to Jurg. Additive Assurance is looking to change that.

3D printing 98

3D printing Additive manufacturing Manufacturing Aerospace 98

Manufacturer's Monthly

MAY 29, 2023

Markforged ’s serial-producing printer – the PX100 Binder Jetting solution – enables manufacturers to build large quantities of high-quality metal parts. Initially developed by a small team in Sweden, Digital Metal began as a subsidiary of Höganäs AB as a relative unknown in 3D printing.

3D printing 98

3D printing Additive manufacturing Made-to-spec Prototype  98

AU Manufacturing

APRIL 19, 2023

In particular, Corporal Michael Niemiec, a member of the innovation cell, used the ‘Fusions 360’ program to create a misfitting supply tool, and after two 3D printing attempts, the third one was reported successful.

3D printing 52

3D printing Manufacturing Prototype  Fit 52

Additive Manufacturing

SEPTEMBER 1, 2022

As physicians and other healthcare professionals work to advance patient care, becoming more personalized and precise, additive manufacturing has demonstrated to become an enabler. Medical 3D printing professionals expect growth in nearly every application area over the next year. What are these patient-specific devices?

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 52

Fabricating & Metal Work

AUGUST 26, 2022

WHAT: Fathom is exhibiting at the International Manufacturing Technology Show (IMTS) in Chicago, IL, from September 12 – 17, 2022, and will be exhibiting a few new technologies, including additive metal 3D printing. Fathom has become the largest on-demand digital manufacturing platform in North America.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Supply Chain 52

Manufacturer's Monthly

JULY 26, 2022

The 2019 exposition’s trade days broke records, attracting 698 companies from more than 25 nations and more than 38,000 attendances, including 161 military, industry and government delegations from around the world. At Avalon 2019 seven Australian innovators were presented with Innovation Awards worth some $45,000.

Aerospace 98

Aerospace 3D printing Form Advanced manufacturing 98

Additive Manufacturing

MARCH 28, 2023

Even more unusual, the most recent build dubbed “Iron Maven” includes custom 3D printed components in many parts of the vehicle. The Iron Maven is an ambitious build that combines the body from a 1961 Volvo PV544 and the chassis and drivetrain from a 2019 Volvo S60 Polestar.

3D printing 52

3D printing Fit Prototype  Additive manufacturing 52

Additive Manufacturing

FEBRUARY 3, 2023

Recent developments in 3D printing technology and the introduction of composite-based additive manufacturing (CBAM) from Impossible Objects is now being adopted by major defense institutions to print strong, lightweight structures for legacy systems and future product development applications.

Aerospace 52

Aerospace 3D printing Composites Prototype  52

i4.0 today

AUGUST 3, 2023

The Mastering AM conference returns as a live event this year for the first time since 2019 and with the new innovations that have come on stream in the intervening period, the conference is a must-attend event for users of additive technologies.

3D printing 52

3D printing Additive manufacturing Benchmarking Supply Chain 52

Fabricating & Metal Work

SEPTEMBER 19, 2023

Engineers from aerospace and other large-part sectors come to Ingersoll Machine Tools to collaborate on breakthroughs in additive and subtractive manufacturing. The operator’s experience is the same, whether controlling traditional fiber placement, robotic fiber placement, 3D printing, robotic 3D printing, or any CNC machining process.

3D printing 59

3D printing Aerospace Robotics Robotics 59

Additive Manufacturing

FEBRUARY 27, 2023

to elevate the game, unveiling the industry’s first 3D-printed Airless Prototype Basketball. This collaborative effort showcases the groundbreaking capabilities of additive manufacturing and highlights benefits of teamwork within the industry. Location: Chicago, IL Date: (Feb. senior consultant with Additive Minds at EOS.

Prototype  52

Prototype  3D printing Additive manufacturing Manufacturing 52

AU Manufacturing

FEBRUARY 10, 2023

Johnson Screens offers a comprehensive range of solutions for the wastewater management industry, backed by over 100 years of design, manufacturing, service and sales experience. The HP Multi Jet Fusion system is a complete 3D printing solution. After this we finalise our parts with a media cleaning system and 100% inspection.”

3D printing 52

3D printing Additive manufacturing Rapid prototyping Prototype  52

Robotics Business Review

FEBRUARY 29, 2024

Figure said it plans to use the funding to grow its AI training, manufacture more robots, and hire the engineers necessary to get production units to market in the 2024-2025 timeframe. What I witnessed was a methodical approach to iterative development that included an in-house CNC metalworking shop and a 3D-printing farm.

Robotics 137

Robotics Robotics Prototype  3D printing 137

MEM

FEBRUARY 16, 2023

The pioneering technology adoption programme from Made Smarter has marked its fourth anniversary by helping its 250th SME manufacturer invest in new technology. Made Smarter, which was launched in 2019 to help SME manufacturers digitalise, decarbonise and drive growth, is now looking towards further success in 2023.

3D printing 98

3D printing Robotics Robotics Manufacturing 98

Additive Manufacturing

MAY 11, 2023

Manufacturer of unique industrial 3D printers, Lynxter confirms its continued growth thanks to a new round of funding to accelerate international expansion and further strengthen its offer. In 2019, Lynxter completed a €1.5 million seed round thanks to trusted investors (IRDI Capital Investissement and Emeric d’Arcimoles).

3D printing 52

3D printing Additive manufacturing Industry 4.0 Industry 4.0 52

Robotics Business Review

AUGUST 13, 2024

We founded Rapid Robotics in 2019, with a vision of solving the labor shortage and reinvigorating the American supply chain by providing adaptive and scalable automation solutions in record time and at record low costs,” stated Kretchmer at the time. ” At Modio, which was acquired by Autodesk , Losey shifted to 3D printing and design.

Robotics 127

Robotics Robotics Logistics Artificial Intelligence 127

i4.0 today

JULY 21, 2023

A cycle clothing manufacturer is gearing up for growth after investing £100,000 in new technology with the support of Made Smarter. I would encourage other SME manufacturers to do the same.” Launched in the North West in 2019, Made Smarter has supported more than 2,500 businesses. For more information, visit madesmarter.uk.

Manufacturing 52

Manufacturing 3D printing Robotics Robotics 52

AU Manufacturing

JUNE 11, 2023

The Asia-Pacific International Additive Manufacturing Conference (APICAM) is set to return for its third year from 21 to 23 June at the University of Sydney. APICAM launched in 2017 and had its second event in 2019, although it was put on hold for four years owing to COVID-19.

Additive manufacturing 52

Additive manufacturing Manufacturing Digital manufacturing 3D printing 52

Additive Manufacturing

OCTOBER 6, 2022

No one understands 3D-printing like Stryker – the fact that they’ve been able to dial in the right mix of small, medium, and large pores in a reproducibly randomized matrix is incredible,” said Bala Giri, MD, President and Founder, Texas Neuro Spine Institute.

3D printing 52

3D printing Additive manufacturing Function Manufacturing 52

Robotics Business Review

JULY 11, 2024

Chef Robotics food automation pods assemble ready-to-cook meals for leading food manufacturers. The company is crossing the chasm from early adopters to gain its initial foothold in what promises to be a huge market for food manufacturing automation. million in equity and debt since its founding in 2019. ” Register now.

Food Production 120

Food Production Automation Robotics Robotics 120

i4.0 today

FEBRUARY 7, 2023

Made Smarter’s pioneering technology adoption programme has marked its fourth anniversary by helping its 250th SME manufacturer invest in new technology. Made Smarter, which was launched in 2019 to help SME manufacturers digitalise, decarbonise and drive growth, is now looking towards further success in 2023.

Industry 4.0 52

Industry 4.0 Industry 4.0 Manufacturing 3D printing 52

AU Manufacturing

APRIL 27, 2023

Metal additive manufacturing company Titomic Limited ’s revenue strategy has continued to gain momentum in the third quarter of 2023 after new channels were added to drive innovation in various manufacturing industries.

Manufacturing 52

Manufacturing Additive manufacturing Aerospace Advanced manufacturing 52

AU Manufacturing

SEPTEMBER 30, 2022

Steel manufacturer Amaero International has decided not to proceed with its plans for a titanium powder manufacturing facility in Victoria. . The decision to drop the planned manufacturing facility in Victoria is part of the board’s measures to pursue alternative opportunities for titanium powder production.

Manufacturing 74

Manufacturing 3D printing 74

Additive Manufacturing

SEPTEMBER 28, 2022

Advanced Porous Titanium 3D printing technology with LEGION? Advanced Porous Titanium 3D printing technology with LEGION? Poster presented at: ISTA 2-5 October, 2019; Toronto, Canada. European Knee Society Arthroplasty Conference;2019; Valencia, Spain. All are supported by the CORI? Surgical System.

Robotics 52

Robotics Robotics 3D printing Additive manufacturing 52

Additive Manufacturing

SEPTEMBER 6, 2022

First unveiled in November 2019, the Shop System was designed to bring metal additive manufacturing to machine and job shops with an affordable, turnkey solution that achieves exceptional surface finish parts with rich feature detail at speeds up to 10 times those of legacy powder bed fusion additive manufacturing technologies.

3D printing 52

3D printing Additive manufacturing Supply Chain Function 52

Manufacturer's Monthly

MAY 15, 2023

Markforged’s serial producing printer – the PX100 Binder Jetting solution – enables manufacturers to build large quantities of high-quality metal parts. Initially developed by a small team in Sweden, Digital Metal begun as a subsidiary of Höganäs AB as a relative unknown in 3D printing.

3D printing 59

3D printing Additive manufacturing Made-to-spec Prototype  59

Additive Manufacturing

MAY 1, 2023

Wematter designed and introduced the Wematter Gravity in 2019 which brought an affordable, turnkey SLS solution to the market. The closed-loop system is designed to operate in a smaller-footprint environment outside of a manufacturing floor, such as an office. The small footprint (0.7 The small footprint (0.7

3D printing 52

3D printing Additive manufacturing Consumer Goods Automotive 52

Additive Manufacturing

APRIL 27, 2023

to separately support individual customer programs and requirements Provides customers with one-stop shop and turn-key factory option Tokyo – Nikon Corporation (Nikon) announced the formation of Nikon Advanced Manufacturing, Inc. These transformative programs culminated in the exciting launch of Nikon Advanced Manufacturing, Inc.,

Digital manufacturing 52

Digital manufacturing Manufacturing Advanced manufacturing Additive manufacturing 52

E&T

DECEMBER 2, 2022

Their PEM fuel cell can be 3D-printed or assembled from cheap printed circuit boards, which would enable manufacturing to be scaled up easily. The partly 3D-printed wind-tunnel model. It is not the first time that Airbus has taken inspiration from animals.

3D printing 85

3D printing Logistics Supply Chain Form 85

Manufacturer's Monthly

SEPTEMBER 12, 2023

With the 2023 Endeavour Awards fast approaching, Manufacturers’ Monthly over the coming months will look at previous winners and finalists, firstly looking at Hypersonix. In its 20th year in 2023, these awards are recognised as the premier awards program within the manufacturing industry and the 2022 awards was no exception.

Composites 52

Composites 3D printing Aerospace Cargo 52

Additive Manufacturing

SEPTEMBER 15, 2022

Primescan Connect is the new configuration of Dentsply Sirona’s successful intraoral cart-based scanner, Primescan, which came onto the market in 2019. Also, Primeprint Solution, the highly automated, end-to-end, medical-grade 3D printing system for dental applications, can be easily integrated and connected to the other devices.

3D printing 52

3D printing Compliance Additive manufacturing Function 52

Modern Machine Shop

JANUARY 23, 2023

Brent Donaldson, Editor-in-Chief of Modern Machine Shop: Welcome to Made in the USA, the podcast for Modern Machine Shop magazine that explores some of the biggest ideas shaping American manufacturing. It's become apparent to many people outside of manufacturing, why the US needs a robust manufacturing base.

Sourcing 98

Sourcing Supply Chain Manufacturing 3D printing 98

Fastener News Desk

SEPTEMBER 21, 2022

Fastener manufacturers and distributors are rapidly adopting to ecommerce platforms for several reasons including: revenue growth, better customer experiences, and overall improved efficiency in their operations. . For most of the industry this will be the biggest networking opportunity since 2019. . Tuesday, October 18.

Aerospace 52

Aerospace 3D printing Supply Chain Manufacturing 52

Control Engineering

AUGUST 17, 2023

The overall result shows that the development of 5G-based enterprise AR applications were in an early stage of development in 2021, but there are promising use cases that showed the potential of 5G in driving adoption of enterprise AR applications in various sectors, particularly in manufacturing. The survey was run during May 2021.

Industry 4.0 52

Industry 4.0 Industry 4.0 Smart manufacturing Electronics 52