AU Manufacturing

OCTOBER 24, 2022

For the automotive industry , edge computing represents a solution to latency, bandwidth, and autonomy challenges, as well as regulatory and security requirements, that hold us back from reaching the full potential of data. When this information flows into a manufacturer’s network, it must make real-time decisions about the data.

Automotive 59

Automotive Manufacturing Function Sourcing 59

AU Manufacturing

JANUARY 26, 2023

The manufacturing output of British cars declined by 9.8 per cent in 2022 to 775.014 units in December, according to a report released by the Society of Motor Manufacturers and Traders (SMMT). Since 2017, the value of BEV, PHEV and HEV exports has risen seven-fold, from GBP 1.3 billion (AUD 2.3

Manufacturing 84

Manufacturing Supply Chain Automotive 84

SMMT

MARCH 12, 2023

Industry urges government to get behind £67 billion automotive sector and pitch positively to the world to win green growth, jobs and prosperity. Sector sets out Green Automotive Transformation Strategy in response to global competition for EV production.

Supply Chain 98

Supply Chain Automotive Electronics Manufacturing 98

Dinesh Mishra

DECEMBER 12, 2024

In a rare moment for the manufacturing world, Apple, Qualcomm Technologies, and SEAT S.A. Representatives from all three companies took the stage to be recognised for their transformative contributions to technology and manufacturing. Their work is laying the foundation for global manufacturing industries. Thats changing fast.

Manufacturing 52

Manufacturing Prototype  Automotive Benchmarking 52

E&T

AUGUST 3, 2023

The team studied industry data from the UK and 24 other European countries between 1995 and 2017 and found that, at low levels of adoption, robots have a negative effect on profit margins. The researchers examined industry-level data for 25 EU countries (including the UK, which was a member at the time) between 1995 and 2017.

Robotics 95

Robotics Robotics Electronics Automotive 95

SMMT

JANUARY 27, 2023

2021 was challenging enough, but the latest UK automotive production figures out this week lay bare just how difficult was 2022. Car manufacturing fell by -9.8% Since 2017 the value of our BEV, PHEV and HEV exports has risen seven-fold, from £1.3 year-on-year. billion to more than £10 billion.

Automotive 52

Automotive Supply Chain Advanced manufacturing Manufacturing 52

Frost & Sullivan Manufacturing

DECEMBER 19, 2022

In the works since 2017, Apple’s Project Titan – culminating in an electric, autonomous driving car – hasn’t quite hit its developmental timelines. The ongoing transformation of the automotive industry powered by connectivity, autonomous, shared /services, and electrification (C.A.S.E) The wait just got a little longer.

Automotive 52

Automotive Value chain Electronics Manufacturing 52

Manufacturer's Monthly

SEPTEMBER 13, 2022

Building from a base of offering a unique service to the automotive market, Injectronics is starting to make a big impact in the industrial space. Manufacturers’ Monthly visited the company’s Victorian facility to learn how it is helping businesses avoid unaffordable downtime. Injectronics’ repair facility in Hallam, Victoria.

Electronics 98

Electronics Automotive Function Pharmaceutical 98

Robotics Business Review

SEPTEMBER 24, 2024

Website: [link] Year Founded: 2017 Number of Employees: 101-500 Innovation Class: Application & Market Loading trucks and trailers is a thankless task, requiring workers to repeatedly move boxes of all sizes. Organization: Dexterity Country: U.S. Dexterity Inc. has been working with FedEx Corp. and Sagawa Express Co.,

Robotics 115

Robotics Robotics Logistics Automation 115

Robotics Business Review

APRIL 25, 2024

In 2017, we recognized that autonomously moving 50,000-lb. Since then, Outrider said it has completed tens of thousands of autonomous trailer moves for customers in the package shipping, consumer packaged goods, automotive manufacturing, retail and e-commerce, and intermodal industries. -based company.

Automation 127

Automation Supply Chain Logistics Robotics 127

Robotics Business Review

APRIL 17, 2024

In the meantime, the company itself changed owners, from Google in 2013 to SoftBank in 2017 and most recently to Hyundai in 2020. ” In the new video below, the previous version of Atlas handles automotive parts and real products weighing up to 25 lb. We want to avoid a ‘humanoid winter,’ so rollouts have to be real.”

Robotics 131

Robotics Robotics Artificial Intelligence Automotive 131

Mold Making Technology

FEBRUARY 15, 2023

The shop produces plastic components through injection molding and plastic welding (vibration and hot plate) for prototype runs up to a couple hundred thousand parts per year for the medical, automotive and consumer products industries. Isaac manages all programs for BTE’s tooling division.

Industry 4.0 93

Industry 4.0 Industry 4.0 Prototype  Automotive 93

AU Manufacturing

AUGUST 2, 2022

Leading energy retailer and generator EnergyAustralia has joined forces with commercial eMobility manufacturer SEA Electric in a strategic partnership, which will assist in accelerating the transition to clean energy for the nation’s truck fleets. . Media Release by SEA Electric. car licence models through to 22.5t three-axle rigids.

Form 86

Form Fit Automotive Sourcing 86

SMMT

JULY 4, 2024

Automotive logistics giant Groupe CAT is renewing its fleet with a significant investment of 60 Scania car transporters. Supplied by local dealer TruckEast Limited, the order consists of 57 420 P low-roof rigids and 3 420 G 4×2 highline tractor units. Each truck is powered by a 13-litre Super engine and all-new driveline.

Logistics 59

Logistics Automotive Manufacturing 59

Canadian Manufacturing

DECEMBER 6, 2024

GUELPH — Team members at DENSO’s thermal manufacturing facility in Guelph, Ontario, have assembled 41 bikes for the Guelph Neighbourhood Support Coalition (GNSC) to donate to local families this holiday season. DENSO also provided helmets with each bicycle. ”

Automotive 59

Automotive Manufacturing 59

Robotics Business Review

NOVEMBER 6, 2024

Formant, a developer of a leading cloud robotics platform, has partnered with Holman, a global automotive services company. This collaboration will combine Formant’s cloud robotics platform with Holman’s fleet and automotive expertise. ” According to Crunchbase, Formant has raised $45 million since it was founded in 2017. .

Robotics 59

Robotics Robotics Automotive Automation 59

Robotics Business Review

JUNE 3, 2024

In 2017, rinf.tech developed with European Union support the first prototype of MATT , a delta robot for device testing. manufacturer that did its software development and testing in Romania before pushing updates to its whole fleet of mobile phones. Craciunescu: Our first idea, the MATT testing robot, came totally by chance.

Robotics 120

Robotics Robotics Automotive Sourcing 120

Mold Making Technology

APRIL 18, 2024

’” The Delta Mold team focuses attention on both individual components and the entire mold assembly during the engineering and manufacturing phases. ” “We were immediately struck by the fact that this system was designed specifically for manufacturers by a company with a manufacturing background,” Wisch explains.

Enterprise Resource Planning (ERP) 98

Enterprise Resource Planning (ERP) Function Automotive Sourcing 98

Dinesh Mishra

OCTOBER 22, 2024

Delhi, October 21, 2024 – OBSC Perfection Limited, a precision metal components manufacturer established in 2017, is set to open its SME IPO on October 22, 2024, with the subscription period closing on October 24, 2024. Anchor allotment is scheduled to be done on 21st October 2024. The IPO aims to raise ₹66.02

Supply Chain 52

Supply Chain Automotive Manufacturing 52

SMMT

SEPTEMBER 18, 2023

UK automotive leaders today celebrate the battery electric car market’s emergence from the ‘early adopter’ phase and discuss the measures needed to shift the technology to mass market following a 21-fold growth in EV uptake since 2018. Taxation would also be fairer if VAT on public charging matched home charging at 5%, not 20%.

Automotive 98

Automotive Manufacturing 98

E&T

SEPTEMBER 23, 2022

The recall is listed on the NHTSA website, and states that the issue may affect 1,096,762 vehicles, including certain 2017 to 2022 Model 3 sedans and some 2020 and 2021 Model Y SUVs, as well as some Model S sedans and Model X SUVs from 2021 and 2022. Tesla has announced it will recall almost 1.1 This is a tiny over-the-air software update.

Function 75

Function Manufacturing Automotive 75

Modern Machine Shop

NOVEMBER 5, 2023

West Ohio Tool , a second-generation custom tooling manufacturer based out of Russell Point, Ohio, learned this lesson during a leadership transition in early 2020 and has thrived since. As a tooling company largely serving automotive, the near-overnight shutdown in the industry hit West Ohio Tool hard.

Automotive 98

Automotive Cycle time Aerospace Fit 98

i4.0 today

SEPTEMBER 18, 2023

TORSUS, manufacturers of the world’s toughest, heavy-duty off-road buses, is proud to announce the growth of its continued cooperation with MAN Truck & Bus, following an agreement for MAN Truck & Bus to manufacture the TORSUS PRAETORIAN’s skeleton chassis. TORSUS: BUILT FOR THE WORLD’S TOUGHEST JOBS. www.torsus.eu

Manufacturing 52

Manufacturing Cargo Advanced manufacturing Industry 4.0 52

Foley

APRIL 11, 2023

Automakers and their suppliers have long been participants in unfair trade investigations before the International Trade Commission (“ITC”), but the scope and subject matter of automotive-related investigations is evolving. This is particularly evident in recent ITC investigations involving semiconductor chips. 337-TA-928.

Automation 75

Automation Automotive Electronics Supply Chain 75

Mold Making Technology

NOVEMBER 22, 2022

Rick Seaberg has 10 years of experience as an injection mold designer, 15 years as a tooling engineer, 12 years as an engineering manager and two years as a plant manager across the consumer packaging, medical, automotive and optical industries. February 2017 — Maintenance Matters: It’s the Manager’s Fault.

Automotive 95

Automotive Manufacturing 95

Mold Making Technology

MAY 2, 2023

From the start, the company embraced the benefits of metal additive manufacturing (AM). “One advantage our team brings to each project is that we have deep experience in both conventional and additive manufacturing and we recognize that additive is only one tool in a moldmaker’s toolbox."

Cycle time 98

Cycle time 3D printing Additive manufacturing Supply Chain 98

Modern Machine Shop

NOVEMBER 24, 2022

Economists may disagree on whether there will be a recession next year, but if there is one, most experts concur that it is not likely to be severe, and most industry analysts doubt it will have a major impact on the manufacturing sector, barring extraordinary events. ” The Gardner Business Index aligns with that general view.

Aerospace 102

Aerospace Supply Chain Composites Electronics 102

Robotics Business Review

JANUARY 17, 2024

Accelerates strategy and growth in adjacent areas: Synopsys said the combination will enhance its silicon-to-systems strategy both across the core EDA segment and in markets such as automotive and aerospace, where Ansys has an established presence and go-to-market experience.

Electronic Design Automation (EDA) 117

Electronic Design Automation (EDA) Electronics Automation Robotics 117

SMMT

OCTOBER 28, 2022

A new Prime Minister and government enter parliament this week and we look forward to working with both to ensure the UK automotive sector remains globally competitive. billion since 2017, with export volumes surging 110.4% Combined BEV, PHEV and HEV global exports have increased in value from £1.3 billion to £7.9

Automotive 52

Automotive Supply Chain Product Record Manufacturing 52

i4.0 today

MAY 18, 2023

Vinfast Lithium Battery Pack (VLBP), manufacturers of batteries for the Vinfast group’s electric motorcycles, chose FPT Software’s Manufacturing Execution System, akaMES, and achieved an 18% increase in productivity and a 10% reduction in costs at their plant in Vietnam. Today Magazine.

Supply Chain 52

Supply Chain Automotive Logistics Automation 52

i4.0 today

SEPTEMBER 11, 2023

Precision engineering plays a vital role in various industries, from automotive to aerospace to medical technology. Its expertise is crucial for the manufacturing of complex, precise products that must meet high-quality standards. More than 150 machines and accessories are up for auction on Surplex.com until 19.09.2023.

Aerospace 52

Aerospace Automotive Manufacturing Industry 4.0 52

Dinesh Mishra

DECEMBER 17, 2024

Manufacturing and energy supply contribute roughly 10.5 Canada is an ideal partner country for HANNOVER MESSE, bringing strengths in sustainable industrial innovation, advanced manufacturing and new technology, says Dr. Jochen Kckler, Chairman of the Managing Board at Deutsche Messe AG, the company that organizes HANNOVER MESSE.

Artificial Intelligence 52

Artificial Intelligence Supply Chain Smart manufacturing Automation 52

i4.0 today

AUGUST 4, 2022

Combining the extensive experience in automotive digital cockpit design of ECARX with AMD advanced computing power and stunning visual graphic rendering capabilities, the companies aim to deliver an innovative in-car experience. “As Beyond this, ECARX is developing a full-stack automotive computing platform. million cars worldwide.

Automotive 52

Automotive Industry 4.0 Industry 4.0 Manufacturing 52

Fabricating & Metal Work

FEBRUARY 12, 2023

In the United States, the company develops and manufactures highly specialized carbide cutting tools, inserts and rods. It has two manufacturing facilities in the United States, one located in Schaumburg and the other in Sacramento, Calif. We are really focused on materials and the complexity of components,” Cope said.

3D printing 84

3D printing Composites Supply Chain Automotive 84

MEM

AUGUST 21, 2023

Since 2017, ABB has already delivered key electrification and automation equipment to power Northvolt Ett gigafactory for lithium-ion batteries in Sweden. Northvolt supplies a range of lithium-ion batteries to the automotive, industrial, and large-scale energy storage sectors that support the global energy transition.

Supply Chain 52

Supply Chain Automation Automotive Manufacturing 52

Mold Making Technology

NOVEMBER 26, 2023

is a 26-year-old mold builder and molder that designs and produces injection and resin transfer molds for medical, automotive, packaging, aerospace/defense and industrial markets and also molds medical devices in high-temperature polymers plus machines metal components for aerospace/defense customers. Westminster Tool Inc.

Benchmarking 102

Benchmarking Aerospace Automation Automotive 102

Fabricating & Metal Work

AUGUST 2, 2023

And CARE engineers spread throughout the country visit local customers to assist with applications, suggest ways to optimize productivity, and provide a link to TruServices options, such as consumables.” Frank has more than eighteen years of manufacturing experience. TRUMPF Inc.

Aerospace 52

Aerospace Electronics Automotive Manufacturing 52