Fabricating & Metal Work

JANUARY 26, 2024

Millerbernd Manufacturing Company, a leading fabricator of light and traffic structures, rolled rings and cylinders, and airfield ground lighting products, announced its Ring & Cylinder division has been ISO 9001:2015 certified from Perry Johnson Registrars, Inc. Located an hour west of Minneapolis, in Winsted, Minn.,

Quality Management System 52

Quality Management System Fit Manufacturing 52

Design World

JANUARY 10, 2024

The recently elected 2024 Board of Directors and Manufacturer Council of the Power Transmission Distributors Association (PTDA) begin their leadership terms. Nowak began volunteering for PTDA in 2015, serving on the Education & Training Committee.

Manufacturing 130

Manufacturing 130

Manufacturer's Monthly

MAY 30, 2024

We set up in 2015 and moved into a new East Arm property in 2021 and since then have been laser-focused on being an NT manufacturer as well as an installer of insulated panels,” Burns said. The Darwin manufacturer is part-way through a collaborative project with JCU that totals $2.9 million in value. million in value.

Manufacturing 98

Manufacturing Advanced manufacturing Supply Chain 98

Manufacturer's Monthly

OCTOBER 4, 2022

The Victorian state government is backing more jobs in regional Victoria with a new housing manufacturing hub to be set up in Portland. The funding will enable Geelong-based manufacturer FormFlow to transform the unused Portland airport hangar into a housing manufacturing hub. The fund forms part of the $17.4 The post $2.35

Manufacturing 105

Manufacturing Form 105

Gary Mintchell

DECEMBER 12, 2024

First post about Rethink Robotics 2015 Employees hired by Universal Robots 2018 Rethink Re-emerges New Products at IMTS –Side note: Reacher and Riser are not as cool as the original Sawyer and Baxter, but interesting that they came back. Here are a few previous posts. “As a newly U.S.

Robotics 130

Robotics Robotics Artificial Intelligence Automation 130

SMMT

JULY 11, 2022

in 2021 compared with the previous year to reach its lowest level since records began, according to new research from the Society of Motor Manufacturers and Traders (SMMT). In addition, since 2015 the industry has ensured that 95% of a vehicle by weight goes through a takeback network to be re-used, recycled or recovered.

Automotive 116

Automotive Manufacturing Supply Chain Sourcing 116

Gary Mintchell

AUGUST 30, 2024

I wrote about Rethink Robotics in March and November of 2015. The post Rethink Robotics Re-emerges appeared first on The Manufacturing Connection. Remember the cute and ground-breaking collaborative robots that pioneered the space—Baxter and Sawyer? The company closed in 2018 0r 2019 and many employees wound up at Universal Robotics.

Robotics 147

Robotics Robotics Manufacturing Automation 147

Gary Mintchell

AUGUST 26, 2024

trillion annually by 2025, up from $3 trillion in 2015. Global cybercrime has shown no sign of decline and is expected to grow by 15 percent per year over the next five years, reaching $10.5

Supply Chain 182

Supply Chain Sourcing Manufacturing Automation 182

Manufacturer's Monthly

JANUARY 18, 2023

From starting out in a Sydney garage in late 2015, RoboHelix now exports globally. RoboHelix’s founder and CEO, Hayel Smair, said he started the company as a response to what he saw as major deficiencies within the flight manufacturing industry. This manufacturing process has been around since the industrial revolution,” Smair said.

Manufacturing 96

Manufacturing Form Robotics Robotics 96

Gary Mintchell

FEBRUARY 16, 2024

Two major sources of technology buzz from around 2015 to 2020 or so found homes in industry consortia within The Object Management Group. The post Industry IoT Consortium and Digital Twin Consortium Merge appeared first on The Manufacturing Connection. These were most likely too much overhead for the supporting suppliers and industry.

Sourcing 130

Sourcing Manufacturing 130

Manufacturer's Monthly

NOVEMBER 8, 2022

Manufacturers’ Monthly congratulates Rebecca Healy as the winner of the Excellence in Manufacturing Award for Women in Industry 2022. In 2015, the UN adopted 17 Sustainable Development Goals to Transform our World, targeted at developed and developing countries to protect the planet and promote prosperity.

Manufacturing 98

Manufacturing Automotive Form 98

MESA

MAY 30, 2023

research contract “Development of Manufacturing, Heat Treatment, and Surface Finishing Guidelines to Yield Ready-to-Use IN- 718 Additive Manufacturing Components” through the United States Air Force (USAF) and the Small Business Innovation Research (SBIR) program led my REM Surface Engineering (REM). has joined $1.5M

Additive manufacturing 130

Additive manufacturing Manufacturing Aerospace Industry 4.0 130

Manufacturer's Monthly

FEBRUARY 14, 2024

When Ford moved manufacturing offshore, you might think that was the end of Premcar – but you would be wrong. To this day Premcar remains a go-to partner for global car manufacturers – the company currently assembles the premium Nissan Navara Warrior and Nissan Patrol Warrior at its site in Epping.

Automotive 98

Automotive Manufacturing Fit Prototype  98

Manufacturer's Monthly

MAY 13, 2024

Based in Newcastle, the company was founded by Tim Lightfoot and Tony Brooks in January 2015. The future certainly looks bright for MITS Alloy and Tim sees the new factory and the new Yawei and Weber equipment assisting the company chase down more contract manufacturing work. appeared first on Manufacturers' Monthly.

Manufacturing 98

Manufacturing Fit Advanced manufacturing Function 98

SMMT

JUNE 5, 2023

Market records longest uninterrupted period of growth since 2015 – but remains -21.0% in May to reach 145,204 units according to the latest figures from the Society of Motor Manufacturers and Traders (SMMT). in May to reach 145,204 units according to the latest figures from the Society of Motor Manufacturers and Traders (SMMT).

Manufacturing 145

Manufacturing 145

E&T

OCTOBER 31, 2023

ULEZ was originally announced under the previous mayor Boris Johnson in March 2015 with a proposed introduction in September 2020. charge applies 24 hours a day and applies to most petrol cars made before 2006, most diesel cars manufactured prior to 2015 and most motorcycles made before 2007.

Compliance 121

Compliance Manufacturing 121

Robotics Business Review

FEBRUARY 20, 2024

Gearbox manufacturer SEAT Componentes needed to automate the unloading of 18,000 machined gears a day at its plant in Spain to guarantee the quality of the parts. The business challenge SEAT is a manufacturer of gearboxes for the Volkswagen Group plants in Europe, Asia, and America. Cobots aid in the gearbox manufacturing process.

Manufacturing 101

Manufacturing Robotics Robotics 3D printing 101

Manufacturer's Monthly

AUGUST 2, 2023

As the director of CSIRO’s Lab 22, Australia’s centre for additive innovation, I have witnessed the rapid and impressive growth of the additive manufacturing (AM) industry. Automotive businesses have adopted AM for rapid prototyping and parts manufacturing, expediting the design process.

Additive manufacturing 94

Additive manufacturing Manufacturing Supply Chain Prototype  94

SMMT

OCTOBER 27, 2022

in September, with 11,979 vans, buses, trucks, coaches and taxis rolling off British factory lines, according to the latest figures released today by the Society of Motor Manufacturers and Traders (SMMT). establishing the best first nine months performance since 2012, with 76,807 units manufactured in Britain since January. This is 21.5%

Manufacturing 126

Manufacturing 126

SMMT

JANUARY 5, 2024

to reach 341,455 units in 2023, according to the latest figures published by the Society of Motor Manufacturers and Traders (SMMT). 1 December was particularly strong, with demand up 36.1% – the best total for the month since 2015. 2 UK new LCV registrations, December 2015: 30,410 units. below 2019 levels. tonnes to 3.5

Manufacturing 137

Manufacturing 137

Canadian Manufacturing

SEPTEMBER 27, 2023

Affected Kia models include the 2010 through 2019 Borrego, the 2014 to 2016 Cadenza, 2010 through 2013 Forte, Forte Koup and Sportage, the 2015 to 2018 K900, the 2011 to 2015 Optima, the 2011 to 2013 Optima Hybrid and Soul, the 2012 to 2017 Rio, the 2011 to 2014 Sorento, and the 2010 to 2011 Rondo.

Manufacturing 85

Manufacturing 85

Manufacturer's Monthly

JUNE 11, 2024

Image: CAPS Australia CAPS Australia is proud to announce its recent ISO certifications in Occupational Health and Safety Management Systems (ISO 45001:2018) and Environmental Management Systems (ISO 14001:2015) for its Perth and Sydney branches. appeared first on Manufacturers' Monthly.

Quality Management System 98

Quality Management System Benchmarking Manufacturing 98

Gary Mintchell

NOVEMBER 24, 2022

PTC’s manufacturing customers rely on field service management for product performance, customer satisfaction, and profitability expansion. Strong synergies between PTC and ServiceMax’s manufacturing customers and product portfolios. The post PTC Acquires ServiceMax appeared first on The Manufacturing Connection.

Aerospace 130

Aerospace Automation Manufacturing 130

Robotics Business Review

MARCH 17, 2024

“We’re looking at agriculture, food, construction, healthcare, logistics, and manufacturing — places used to automation and not so used to it.” By the early 1980s, manufacturing had shifted to Asia, and AP Moller – Maersk decided to invest in research into more efficient means of production.

Robotics 126

Robotics Robotics Supply Chain Automation 126

Manufacturer's Monthly

NOVEMBER 16, 2023

Paper and packaging company Opal has opened the doors to its new manufacturing facility in Wodonga, backing hundreds of jobs with support from the Victorian Government. The new manufacturing facility was designed with sustainability at its centre – it is powered using solar and rainwater harvesting. billion in exports.

Freight 98

Freight Supply Chain Manufacturing Beverage 98

SMMT

AUGUST 25, 2022

UK manufacturing is up 46.9% in July, with 8,097 units of the latest vans, buses, trucks, coaches and taxis rolling off British factory lines, according to the figures released today by the Society of Motor Manufacturers and Traders (SMMT). Pre-pandemic five-year average CV production (2015-19): 50,782 units. Notes to editors.

Freight 129

Freight Automotive Manufacturing 129

SMMT

AUGUST 31, 2023

8,853 units produced in best July since 2015, while year to date output soars 68.0% 2023 UK commercial vehicle (CV) manufacturing output grew 9.3% in July to reach 8,853 units, according to the latest figures published today by the Society of Motor Manufacturers and Traders (SMMT). Commercial vehicle output rises 9.3%

Supply Chain 90

Supply Chain Automotive Manufacturing 90

Control Engineering

JUNE 12, 2023

Manufacturing insights Future-proofing manufacturing uses digitization and digitalization and eventually digital transformation to help companies make better and more informed decisions. Leading manufacturers are making the digital transition with help from trusted partners. We started with just the line operator’s body.

Manufacturing 95

Manufacturing Assembly Line Artificial Intelligence Automation 95

Gary Mintchell

APRIL 25, 2023

The first time edge compute and edge applications came my way was through IT companies—Dell in 2015 and HPE in 2017. Even though you might expect the natural “edge” in manufacturing would lie with the automation vendors, such is not the case. They both still have edge devices and “edge-to-cloud” strategies.

Industry 4.0 130

Industry 4.0 Industry 4.0 Sourcing Function 130

Control Engineering

FEBRUARY 22, 2023

Today, the industrial internet covers multiple verticals from manufacturing (whose products are placed into every vertical) to retail (which is normally considered to be merely point-of-sale, but can be connected to global supply chains, changing the business requirements significantly). Expectations were high. Riding the hype was essential.

Supply Chain 122

Supply Chain Artificial Intelligence Manufacturing Industry 4.0 122

AU Manufacturing

APRIL 6, 2023

According to research foundation DMTC, the COVID-19 pandemic revealed a hole in the manufacturing of diagnostic tests by sovereign nations. The instruments will be manufactured in Axxin’s Melbourne facility accredited for manufacture of regulated IVD medical devices,” Hopper noted.

Manufacturing 74

Manufacturing Supply Chain 74

Manufacturer's Monthly

APRIL 21, 2024

The Victorian company, RayGen has been operating at a test facility in Newbridge since 2015 while their flagship solar and storage project is in Mildura. RayGen’s solar modules will be made in Victoria with a new manufacturing facility under construction in Hawthorn East.

Advanced manufacturing 101

Advanced manufacturing Manufacturing 101

Additive Manufacturing

NOVEMBER 11, 2022

Where 3D printing really thrives in this industry is for short volume, high accuracy parts, but that’s not to say there hasn’t been successful applications of serialized parts like GE’s fuel nozzle that went into manufacturing in 2015 and is still being manufactured in thousands-per-year quantities.

3D printing 98

3D printing Aerospace Quality Management System Compliance 98

AU Manufacturing

NOVEMBER 3, 2022

a2 Platinum is manufactured in New Zealand and is a leading international infant milk formula brand. . where it has sold its premium fresh milk products since 2015, to secure distribution for a2 Platinum in key nationwide retailers. market in 2015, works exclusively with U.S. market to help alleviate the ongoing supply crisis.

Manufacturing 90

Manufacturing Supply Chain 90

Robotics Business Review

JULY 29, 2024

The companies said the transaction will enable Ghost Robotics to use LIG Nex1’s experience and manufacturing capabilities to accelerate its growth. Ghost Robotics to widen Q-UGVs applications Founded in 2015, Ghost Robotics has developed quadrupedal uncrewed ground vehicles, or Q-UGVs. . | Credit: Ghost Robotics LIG Nex1 Co.,

Robotics 111

Robotics Robotics Fit Electronics 111

AU Manufacturing

NOVEMBER 7, 2022

Queensland-based rocket manufacturer Gilmour Space Technology has completed the final qualification test fire of its Sirius hybrid rocket engine. . ” Gilmour Space Technology is Australia’s leading venture-backed space manufacturer of launch vehicles and satellite platforms. .

Manufacturing 98

Manufacturing 98

MEM

SEPTEMBER 21, 2023

Wells Plastics Limited is the UK’s largest specialist additive masterbatch and compound manufacturer, established in 1984, based in Stone, Staffordshire. Wells Plastics is ISO 9001 (2015), ISO 14001 (2015) Gold EcoVadis and JOSCAR certified.

Manufacturing 52

Manufacturing Aerospace Composites 52