Chris Hohmann

SEPTEMBER 9, 2022

While flipping through a vintage (2015-2016) Harvard Business Review (printed) magazine, I was struck by the article “Why Strategy Execution Unravels—and What to Do About It” by Donald Sull, Rebecca Homkes, and Charles Sull.

154

154

Fastener News Desk

JULY 10, 2024

The program ran in 2014 & 2015 and then it was put on pause as so many young fastener professionals had been recognized in those two years. Candidly, there were only so many young people entering the fastener industry and they feared that by running the program again they would run out of worthy candidates.

Logistics 52

Logistics Aerospace Electronics Form 52

Design World

AUGUST 8, 2022

In 2015, the company opened a parts side–Midwest Industrial Supplies. The Power Transmission Distributors Association (PTDA), the leading association for the industrial power transmission/motion control (PT/MC) distribution channel, has welcomed a new member company. MEM Industrial, LLC (Wichita, Kan.) Today, MEM is the largest U.S.

Form 162

Form 162

Design World

JANUARY 10, 2024

Nowak began volunteering for PTDA in 2015, serving on the Education & Training Committee. The recently elected 2024 Board of Directors and Manufacturer Council of the Power Transmission Distributors Association (PTDA) begin their leadership terms. Since then,… The post Brian Nowak and Andrew A.O.

Manufacturing 130

Manufacturing 130

Design World

JULY 18, 2023

Eagle Stainless Tube & Fabrication, a small-diameter stainless steel tubing supplier, is proud to announce the successful renewal of its ISO 13485:2016 and ISO 9001:2015 quality management certifications. Eagle has been maintaining ISO quality certifications since 1998, spanning 25 years!

130

130

Robotics Business Review

NOVEMBER 11, 2024

The company first sold the UR5 cobot in 2008, followed by the launches of UR10 in 2012 and UR3 in 2015. for $285 million in 2015, the introduction of the e-Series in 2018, and reaching the industry milestone of 50,000 cobots sold worldwide in 2020. Universal Robots’ growth is evidenced by its acquisition by Teradyne Inc.

Robotics 112

Robotics Robotics Automation Automotive 112

Manufacturing Tomorrow

JANUARY 10, 2025

In 2015, it was quick to spot the potential of SLS 3D printing technology and introduced advanced equipment. First Mold Manufacturing Limited, established in 2011, has long been a key player in the highly competitive prototype manufacturing industry.

3D printing 52

3D printing Prototype  Electronics Automotive 52

MRPEasy

MAY 28, 2024

In 2015, a few experienced engineers from a reputable technology consultancy firm decided to go it alone and design a novel radar system. They engineered a prototype using, in part, an ordinary tea-tray. The finished product surpassed expectations and landed the team a contract with the UK Ministry of Defense.

Prototype  111

Prototype  Manufacturing 111

Gary Mintchell

AUGUST 30, 2024

I wrote about Rethink Robotics in March and November of 2015. Remember the cute and ground-breaking collaborative robots that pioneered the space—Baxter and Sawyer? The company closed in 2018 0r 2019 and many employees wound up at Universal Robotics. The company’s assets wound up in Germany at the HAHN group. Time has passed.

Robotics 147

Robotics Robotics Manufacturing Automation 147

Robotics Automation News

SEPTEMBER 28, 2023

All the way back in 2015, when drones were far less readily available, easyJet pioneered the use of the Remote Intelligent Survey Equipment for Radiation or RISER drone […]

111

111

Canadian Manufacturing

JANUARY 29, 2025

These achievements underscore the company’s development towards standards of information security, environmental management, and compliance with industry-specific security requirements, complementing its existing ISO 9001:2015 and ISO 17025:2017 certifications.

Supply Chain 52

Supply Chain Compliance Automotive Automation 52

Canadian Manufacturing

SEPTEMBER 27, 2023

Affected Kia models include the 2010 through 2019 Borrego, the 2014 to 2016 Cadenza, 2010 through 2013 Forte, Forte Koup and Sportage, the 2015 to 2018 K900, the 2011 to 2015 Optima, the 2011 to 2013 Optima Hybrid and Soul, the 2012 to 2017 Rio, the 2011 to 2014 Sorento, and the 2010 to 2011 Rondo.

Manufacturing 85

Manufacturing 85

SMMT

JUNE 5, 2023

Market records longest uninterrupted period of growth since 2015 – but remains -21.0% New car registrations rise 16.7% to deliver 10th consecutive month of growth as supply continues to improve. down on 2019. Drivers continue switch to electric vehicles as BEV volumes grow 58.7% to take 16.9% market share. below pre-pandemic 2019 levels.

Manufacturing 145

Manufacturing 145

Robotics Business Review

JANUARY 9, 2025

Founded in 2015, MassRobotics is dedicated to accelerating innovation and adoption in the field of robotics. . “We are excited to help them scale and collaborate with our network to bring their technologies to real-world applications that can improve patient outcomes and healthcare efficiency.

Robotics 117

Robotics Robotics Automation Artificial Intelligence 117

Manufacturer's Monthly

JULY 16, 2024

In 2015, Queensland established a 50 per cent renewable energy target by 2030. Queensland is accelerating towards its renewable energy targets and now boasts 54 large-scale renewable energy projects since 2015. In 2022, this target was increased to 70 per cent by 2032, and 80 per cent by 2035.

Manufacturing 98

Manufacturing Sourcing 98

E&T

OCTOBER 31, 2023

ULEZ was originally announced under the previous mayor Boris Johnson in March 2015 with a proposed introduction in September 2020. charge applies 24 hours a day and applies to most petrol cars made before 2006, most diesel cars manufactured prior to 2015 and most motorcycles made before 2007.

Compliance 121

Compliance Manufacturing 121

Design World

AUGUST 2, 2022

Solomon joined the Company in 2015 as a Business Development Manager focused on an automotive industry account, before transitioning the same year into an Automotive Specialist role concentrating on a different automotive account. Motion Industries, Inc.,

Automotive 147

Automotive 147

Robotics Automation News

JULY 15, 2022

Doosan Robotics was founded in South Korea in 2015 and following three years of research and development they developed a range of four cobot models that use their […].

Robotics 98

Robotics Robotics Automation 98

Gary Mintchell

AUGUST 26, 2024

trillion annually by 2025, up from $3 trillion in 2015. Global cybercrime has shown no sign of decline and is expected to grow by 15 percent per year over the next five years, reaching $10.5

Supply Chain 182

Supply Chain Sourcing Manufacturing Automation 182

Gary Mintchell

FEBRUARY 16, 2024

Two major sources of technology buzz from around 2015 to 2020 or so found homes in industry consortia within The Object Management Group. I talked often with people from the IIC, aka Industry IoT Consortium , and with the Digital Twin Consortium. These were most likely too much overhead for the supporting suppliers and industry.

Sourcing 130

Sourcing Manufacturing 130

Fabricating & Metal Work

JANUARY 24, 2024

The Guill high quality standards are evidenced by the company’s many certifications, including ISO 9001:2015. Besides being experts in extrusion tooling, Guill is a major industrial manufacturer who can provide customers with one-stop shopping for their tooling and other select machine shop needs.

Manufacturing 111

Manufacturing Prototype  Aerospace 111

Gary Mintchell

DECEMBER 12, 2024

First post about Rethink Robotics 2015 Employees hired by Universal Robots 2018 Rethink Re-emerges New Products at IMTS –Side note: Reacher and Riser are not as cool as the original Sawyer and Baxter, but interesting that they came back. Here are a few previous posts.

Robotics 130

Robotics Robotics Artificial Intelligence Automation 130

E&T

FEBRUARY 1, 2023

From 2015 to 2021, the impact of winter heating on China’s capital Beijing and 27 other cities saw concentrations of fine particulate matter (PM2.5) µg m-3 in 2015. in mainland China to reduce significantly between 2015 and 2021, with significant public health benefits.” from heating activities reduce by 41.3

Sourcing 98

Sourcing 98

Manufacturer's Monthly

JUNE 11, 2024

Image: CAPS Australia CAPS Australia is proud to announce its recent ISO certifications in Occupational Health and Safety Management Systems (ISO 45001:2018) and Environmental Management Systems (ISO 14001:2015) for its Perth and Sydney branches.

Quality Management System 98

Quality Management System Benchmarking Manufacturing 98

SMMT

JANUARY 5, 2024

1 December was particularly strong, with demand up 36.1% – the best total for the month since 2015. 2 UK new LCV registrations, December 2015: 30,410 units. 2 As a result of rising vehicle investment across the year, 2023 saw the highest demand for new vans since the sector’s post-pandemic bounceback in 2021, with the market just -6.6%

Manufacturing 137

Manufacturing 137

Robotics Business Review

NOVEMBER 25, 2024

Imagry trains in real time with supervision Ofir started Imagry in 2015 with a focus on computer vision for retail and pivoted to autonomous driving in 2018. . “For example, in Turkey, France, Spain, and soon Japan, we’re retrofitting electric buses to be autonomous.” ” Apply to speak. and Haifa, Israel.

Bill of Materials 111

Bill of Materials Automotive Robotics Robotics 111

Manufacturer's Monthly

MARCH 17, 2025

ELGi products have ISO 9001:2015, ISO 14001:2015, ISO 45001 : 2018, Green Product certification, ISO 22000:2018. Every ELGi manufactured unit delivers compressed air solutions of quality and best-in-class efficiency at competitive pricing to customers across various industrial verticals worldwide.

Manufacturing 52

Manufacturing Assembly Line Advanced manufacturing Automation 52

Manufacturer's Monthly

AUGUST 4, 2024

The Labor Government has invested over $8 billion in Victorian-built rolling stock and infrastructure since 2015, supporting over 10,000 jobs across the industry. The post New appointment to advance VIC transport manufacturing appeared first on Manufacturers' Monthly.

Manufacturing 98

Manufacturing Supply Chain 98

The Fabricator

DECEMBER 17, 2022

Lexicon Fabrication Group’s dive into robotic welding in 2015 spurred a virtuous cycle of growth. Automation opened up more opportunities, which in turn pushed hiring into high gear.

Automation 78

Automation Robotics Robotics 78

Control Engineering

FEBRUARY 22, 2023

In 2015, McKinsey & Company published a comprehensive report examining different vertical markets. In 2021, McKinsey and Company followed up the 2015 report with another that discussed why the market had not grown as much as had been expected. Expectations were high. Riding the hype was essential. The market was viral.

Supply Chain 122

Supply Chain Artificial Intelligence Manufacturing Industry 4.0 122

Dinesh Mishra

JANUARY 9, 2025

IMTMA and AceMicromatic Group have partnered to host National Productivity Summit since 2015. Bengaluru, 6 January 2025: Indian Machine Tool Manufacturers Association (IMTMA) and AceMicromatic Group have entered into a strategic partnership for productivity excellence in manufacturing.

Manufacturing 52

Manufacturing Form 52

The Fabricator

MAY 14, 2024

has received ISO 9001:2015 and AS9100D certifications in recognition of its quality management systems. EMJD Precision Fabrication, Englewood, Colo.,

Quality Management System 64

Quality Management System 64

Canadian Manufacturing

JANUARY 30, 2025

Founded in 2015 by Quebecers Patrick Dussault and Stphane Huot, – where Abhi Capoor is also a key partner NAMAKOR invests in mid-market manufacturing companies to drive their international growth.

Manufacturing 52

Manufacturing Supply Chain Compliance 52

Manufacturer's Monthly

SEPTEMBER 6, 2022

Back in 2015, Rittal launched Blue e+, the world’s most energy-efficient range of cooling units. Meet the Rittal Blue e+ family of cooling units. Thinking about how to maximise your company’s energy efficiency and significantly reduce your energy consumption and carbon footprint?

Function 97

Function Manufacturing 97

Robotics Business Review

DECEMBER 19, 2024

Founded in 2015, OhmniLabs builds disinfection and telepresence robots. The companies did not disclose the financial details of the transaction. While Symbotic could pursue healthcare robotics solutions , it certainly would also be interested in OhmniLabs’ in-house manufacturing expertise.

Robotics 57

Robotics Robotics Logistics Supply Chain 57

Robotics Business Review

MARCH 7, 2024

Veteran tech exec Peggy Johnson named Agility Robotics CEO Agility Robotics co-founder Damion Shelton has served as CEO since the company’s founding in 2015. Also launches fully driverless rides for employees in Austin; will begin shuttling employees around 43 square miles of the Texas capital.

Robotics 130

Robotics Robotics 130

Gary Mintchell

APRIL 25, 2023

The first time edge compute and edge applications came my way was through IT companies—Dell in 2015 and HPE in 2017. They both still have edge devices and “edge-to-cloud” strategies. Neither comes to me with information or invitations to user groups anymore.

Industry 4.0 130

Industry 4.0 Industry 4.0 Sourcing Function 130