AU Manufacturing

APRIL 3, 2023

A collaborative project involving the Advanced Manufacturing Growth Centre (AMGC) has commercialised a new steel manufacturing process that uses waste rubber feedstock. I encourage all manufacturers to engage with your local research institution and challenge them with a business issue that needs solving.

Manufacturing 76

Manufacturing Advanced manufacturing 76

E&T

SEPTEMBER 5, 2023

Until earlier this year, Toyota had not introduced a new hydrogen vehicle since 2014, although it unveiled the 2023 Toyota Crown sedan in April. Industry minister Nusrat Ghani said: “We have an amazing manufacturing sector here in the UK, and this is a great example.

Prototype  111

Prototype  Manufacturing Automotive 111

NIST Manufacturing

JANUARY 25, 2024

The GCTC was formed in 2014 as a partnership of The Global Community Technology Challenge (GCTC) is a U.S. smart cities and communities program led by the Smart Connected Systems Division of the National Institute of Standards and Technology (NIST).

Form 101

Form 101

AU Manufacturing

MAY 22, 2023

million Advanced Manufacturing Centre of Excellence at Melbourne Polytechnic’s Heidelberg campus. million Advanced Manufacturing Centre of Excellence (AMCOE) will train future workers and upskill existing ones to promote innovation and North Melbourne’s increasingly technology-driven, value-added manufacturing industry.

Advanced manufacturing 65

Advanced manufacturing 3D printing Manufacturing Aerospace 65

AU Manufacturing

APRIL 27, 2023

Representatives from mRNA Victoria have signed an international partnership with Afrigen Biologics and the South African Medical Research Council to develop and manufacture next-generation mRNA vaccines and medicines. The Victorian Labor Government has invested over $1.3

Manufacturing 72

Manufacturing Advanced manufacturing 72

Fabricating & Metal Work

NOVEMBER 6, 2022

Machining demonstration sessions as well as expert presentations will introduce the latest solutions for automotive manufacturing and general engineering. These are accomplished in close collaboration with customers and manufacturing partners. Subscribe to learn the latest in manufacturing. © Seco Tools. Free Registration.

Automotive 105

Automotive Manufacturing Aerospace Additive manufacturing 105

Manufacturer's Monthly

OCTOBER 13, 2024

Since 2014, the Victorian Government has more than quadrupled the amount of power generated by wind farms and the share of electricity generated by renewables has increased from less than 10 percent to 39 percent last year. Once complete, the 1.3 billion in economic activity and 59,000 jobs.

Manufacturing 101

Manufacturing 101

Robotics Business Review

SEPTEMBER 9, 2024

About Applied Motion Products Founded in 1978, Applied Motion Products provides motion control components for original equipment manufacturers (OEMs). In 2014, AMP formed a joint venture with Moons’ Shanghai, a leader in motion control and intelligent lighting.

Supply Chain 119

Supply Chain Sourcing Robotics Robotics 119

Manufacturer's Monthly

JUNE 19, 2023

As industries that have always prioritised innovation as a way to make processes more efficient and cost-effective, manufacturing and robotics have a long and illustrious history. Fast forward to the present day and the controlled manufacturing environment is seen as the ideal testing ground for new robotics and automation systems.

Robotics 102

Robotics Robotics Manufacturing Artificial Intelligence 102

MEM

MAY 18, 2023

The Pressure Equipment Directive (PED)(2014/68/EU) aims to ensure high levels of safety for equipment intended for use in the EU. It applies to the design, manufacture and conformity assessment of pressure equipment and assemblies that exceed certain pressure, volume, or nominal diameter thresholds.

Manufacturing 52

Manufacturing 52

NIST

JULY 25, 2023

One of the top 10 food incubators in the country, Hope & Main has launched nearly 300 businesses since 2014, making it possible for these firms to have a business and creating a more diverse food economy in the state. It takes a village Hope & Main works with Polaris MEP (Rhode Island MEP) and other organizations to make this happen.

Beverage 52

Beverage Manufacturing 52

Manufacturer's Monthly

AUGUST 28, 2023

CEO of the International Exhibition & Conference Group Marie Kinsiella spoke with Manufacturers’ Monthly about the state of robotics in Australia in the lead up to the 2023 Modern Manufacturing Expo. Here, highly skilled workers are on hand to oversee these systems and ensure their high performance.

Robotics 94

Robotics Robotics Manufacturing Artificial Intelligence 94

Manufacturer's Monthly

AUGUST 9, 2023

Markforged has been at the forefront of additive manufacturing for the past 10 years, helping manufacturers revolutionise the industrial production landscape by bringing 3D printing right to the factory floor. This advancement opened new possibilities for manufacturing stronger and more resilient parts.

Additive manufacturing 91

Additive manufacturing 3D printing Manufacturing Supply Chain 91

Mold Making Technology

AUGUST 22, 2023

Lead time is the culmination of the entire mold manufacturing process. A quality mold delivered on time results from a team of professionals working together from sales, design and manufacturing to validation, delivery and support. Armin Tool & Manufacturing Byrne Tool & Die Cavalier Tool & Manufacturing Century Die Co.

Manufacturing 98

Manufacturing Lead Time Form Consumer Goods 98

Fastener News Desk

OCTOBER 17, 2024

Papenfuss has served as Fastenal’s Vice President of Contract Development and Support from February 2014 to October 2024. From July 2006 to February 2014, Ms. Additionally, she will enhance communication efforts to support these initiatives and ensure alignment with overall business objectives. In the past year, Ms.

Supply Chain 52

Supply Chain Sourcing Logistics Function 52

Manufacturer's Monthly

AUGUST 17, 2023

Gippsland’s family-owned manufacturing business LV Shade & Shutters is set to enjoy its new expansion made possible by the Victorian Government, with the new manufacturing and retail site in Traralgon now complete. The business designs and manufactures its products in Traralgon, servicing the whole of Gippsland and Melbourne.

Manufacturing 52

Manufacturing Fit Composites 52

AU Manufacturing

MARCH 21, 2023

The Australian manufacturing sector is set to see a downward trend in the upcoming months as high inflation, spiralling energy costs, and ongoing labour shortage drag the industry’s economic outlook, according to the latest ACCI-Westpac Survey of Industrial Trends. points, up from December’s 49.0,

Manufacturing 52

Manufacturing Composites 52

AU Manufacturing

JUNE 15, 2023

Increased adoption of robotic technologies could be what is needed to compete on a global basis and improve Australia’s sovereign capabilities, which will be a significant topic of discussion at the September Modern Manufacturing Expo , according to Marie Kinsella , CEO of the International Exhibition & Conference (IEC) Group.

Robotics 59

Robotics Robotics Artificial Intelligence Manufacturing 59

Canadian Manufacturing

SEPTEMBER 27, 2023

Affected Kia models include the 2010 through 2019 Borrego, the 2014 to 2016 Cadenza, 2010 through 2013 Forte, Forte Koup and Sportage, the 2015 to 2018 K900, the 2011 to 2015 Optima, the 2011 to 2013 Optima Hybrid and Soul, the 2012 to 2017 Rio, the 2011 to 2014 Sorento, and the 2010 to 2011 Rondo.

Manufacturing 85

Manufacturing 85

Manufacturer's Monthly

JANUARY 4, 2023

Markforged is collaborating with Australia’s brightest minds to push the envelope for additive manufacturing capability. Manufacturers’ Monthly spoke to Markforged’s CEO about how its platform creates digital inventory to build Australia’s sovereign production.

Manufacturing 102

Manufacturing Composites Additive manufacturing Aerospace 102

i4.0 today

FEBRUARY 2, 2023

Resistor manufacturer Cressall Resistors has recently received a Cyber Essentials certification — a government-backed scheme developed by the National Cyber Security Centre and delivered by IASME Governance. Cyber Essentials was launched in 2014 as part of the Government’s wider National Cyber Security Strategy. Today Magazine.

Manufacturing 52

Manufacturing Compliance Automotive Industry 4.0 52

Canadian Manufacturing

SEPTEMBER 16, 2022

manufacturing facility, prompting a visit from Bryan Paterson, the mayor of Kingston. He then extended the interlocking panel concept and lean manufacturing principles to wall paneling and office pod kits. In 2014 they opened a second facility in Kingston, Ont. dedicated to manufacturing a variety of workspace products.

Lean manufacturing 40

Lean manufacturing Manufacturing 40

Robotics Business Review

NOVEMBER 5, 2024

Organization: Gardarika Tres Country: Ukraine Website: [link] Year Founded: 2014 Number of Employees: 11-20 Innovation Class: Application & Market Ukraine-based Gardarika Tres LLC is a manufacturer and distributor of agricultural equipment that focuses on precision farming systems and was founded in 2014.

Robotics 64

Robotics Robotics Logistics Automation 64

Additive Manufacturing

OCTOBER 24, 2022

The medical device market has historically been one of the pioneer industries using additive manufacturing (AM) for production. In fact, according to FDA’s analysis of medical device clearances, additive manufacturing has been used in medical device production as early as 2008 (Ricles, L & Oh, S. RAPID, May 2014).

Additive manufacturing 74

Additive manufacturing Manufacturing Quality Management System Sourcing 74

Manufacturer's Monthly

JUNE 5, 2024

Elias Bitar/stock.adobe.com The iconic NSW made Tangara trains are set to receive critical upgrades as the NSW Government forges ahead with a Future Fleet Program to return domestic manufacturing to NSW and build the next generation of Tangaras right here. We can’t rebuild an entire sector overnight – but we have to start somewhere.

Compliance 98

Compliance Manufacturing 98

Robotics Business Review

AUGUST 8, 2024

It also manufactures CNC controls , drives, motors, encoders, and spindles. In addition, the company launched the Okuma App Store in 2014, and it has a distribution network and a Partners in Technology ( previously Partners in THINC) network for manufacturers in the Americas. -based company is a division of Okuma Corp.,

Robotics 115

Robotics Robotics Automation Sourcing 115

Automation Mag

AUGUST 30, 2022

The future of the manufacturing and automation technology sector looks bright. To highlight the achievements of each individual selected for the Top 10 Under 40 list, Manufacturing AUTOMATION will feature one of 2022’s winners every week for the next 10 weeks. Nominations for the 2023 contest open at the end of the year.

Manufacturing 52

Manufacturing Artificial Intelligence Automation Robotics 52

Cisco Smart Manufacturing

JANUARY 29, 2024

Since its launch in 2014, Cisco DevNet has been more than just a platform for developers and IT professionals. It has been a thriving community of like-minded individuals driven by their passion for… Read more on Cisco Blogs

52

52

Fabricating & Metal Work

OCTOBER 4, 2022

Manufacturers must produce lighter and more compact EV transmissions from tough materials such as low-alloy steels — and those that rely on traditional manufacturing processes risk falling behind. To examine these challenges, let’s focus on the manufacture of gear components. Meanwhile, Virta reports that 1.06

Manufacturing 98

Manufacturing Cycle time Lead Time Form 98

Fabricating & Metal Work

APRIL 11, 2023

The decision to launch the Okuma Factory Automation Division was in direct response to increased demand from manufacturers seeking automated machining systems and cells for their operations to address labor shortage issues and to increase production capacities.

Automation 52

Automation Manufacturing Smart manufacturing Function 52

SMMT

MAY 23, 2024

Manufacturer investment and innovation must be matched by other stakeholders as industry calls for fair taxes for a fair transition. Nine in 10 electric car drivers say they wouldn’t go back to a conventionally fuelled vehicle and, with manufacturers offering compelling discounts on the latest BEVs, the time to switch has seldom been better.

Automotive 127

Automotive Fit Manufacturing 127

Additive Manufacturing

DECEMBER 17, 2022

Divergent has developed an alternative production process to traditional vehicle manufacturing called DAPS® (Divergent Adaptive Production System) that addresses economic and environmental challenges. Parts are 3D printed and assembled autonomously, reducing manufacturing time and human intervention.

3D printing 52

3D printing Manufacturing Discrete manufacturing Automotive 52

Robotics Business Review

FEBRUARY 5, 2024

In 2014, it formed a joint venture with Moons’ Shanghai, a leader in motion control and intelligent lighting. Applied Motion Products said this joint venture partnership enables it to provide it customers with supply chain reliability and vertical integration through a greater range of resources and manufacturing capabilities.

Robotics 119

Robotics Robotics Supply Chain Form 119

Robotics Business Review

APRIL 5, 2024

” The company claimed that its MDX+ servo series is suitable for manufacturers in logistics, automated guided vehicle ( AGV ), medical, semiconductor, packaging, textile, electronic inspection, and solar industries, among others. Learn from Agility Robotics, Amazon, Disney, Teradyne and many more.

Supply Chain 113

Supply Chain Robotics Robotics Logistics 113

MEM

JULY 4, 2023

There are many challenges to succeeding in the manufacturing industry. Get to know why a resilient financial system is important in manufacturing and how to ensure yours excels in the modern landscape. That’s at the heart of why a resilient system is important in manufacturing. If that’s not enough, it can protect it from harm.

Manufacturing 52

Manufacturing Compliance Supply Chain Lean manufacturing 52

Manufacturer's Monthly

OCTOBER 26, 2022

Wire Additive Manufacturing (WAM®) developer AML3D has announced a purchase contract with BAE Systems Australia to manufacture prototype parts for nine Hunter class frigates. . AML3D utilises new technologies to pioneer and lead metal additive manufacturing globally.

Prototype  102

Prototype  3D printing Additive manufacturing Aerospace 102

Modern Machine Shop

SEPTEMBER 13, 2024

Source: AMT - The Association For Manufacturing Technology IMTS 1980-1988: Attendance skyrocketed and broke records. IMTS 1990: The name of the show was officially changed to The International Manufacturing Technology Show (IMTS). It introduced software standard MTConnect, an advanced manufacturing center and the new innovation center.

Robotics 52

Robotics Robotics Additive manufacturing 3D printing 52