Manufacturer's Monthly

AUGUST 5, 2024

Image: VAILO Australian advanced manufacturing company VAILO will establish a state-of-the-art manufacturing facility on the Gold Coast ahead of the 2032 Brisbane Olympics. The investment into the manufacturing base in Queensland will be complemented by a South Australian-based R&D facility within the Tonsley Innovation District.

Manufacturing 98

Manufacturing Advanced manufacturing Logistics 98

SMMT

SEPTEMBER 30, 2022

to 6,132 units, marking the best August since 2012 and the eighth consecutive month of growth. at 64,828 units in the best year-to-date since 2012. higher than the pre-pandemic five-year average, 3 resulting in the best first eight months of a year since 2012. August 2012: 7,608 units. January-August 2012: 72,708 units.

Manufacturing 104

Manufacturing 104

SMMT

OCTOBER 27, 2022

to 76,807, the best performance since 2012. in September, with 11,979 vans, buses, trucks, coaches and taxis rolling off British factory lines, according to the latest figures released today by the Society of Motor Manufacturers and Traders (SMMT). Overall year-to-date volumes up 50.8% This is 21.5% This is 21.5% Notes to editors.

Manufacturing 126

Manufacturing 126

Manufacturer's Monthly

NOVEMBER 15, 2022

Australia is a step closer towards developing sovereign capability in critical technology with SoftIron officially opening Australia’s first component-level IT infrastructure manufacturing facility in Sydney. Opening of SoftIron’s Advanced Manufacturing Facility in Sydney earlier this week.

Supply Chain 105

Supply Chain Manufacturing Advanced manufacturing Fit 105

SMMT

MAY 25, 2023

in the year to date – the best performance since 2012 – as semiconductor shortages ease. UK commercial vehicle (CV) manufacturing output increased by 33.3% Manufacturing output is now up 9.0% at 21,990 units – the best YTD performance since 2012. Production is up 9.0% 1 Growth was driven by a 56.3% of exports.

Manufacturing 83

Manufacturing Supply Chain 83

AU Manufacturing

NOVEMBER 3, 2022

Northrop manufactures the centre fuselage section for all three F-35 variants. . In 2012, ASX-listed company Quickstep joined Northrop Grumman’s global supply chain for the F-35 and has since become the global aerospace company’s largest Australian supplier for the program. .

Aerospace 93

Aerospace Supply Chain Manufacturing Composites 93

SMMT

SEPTEMBER 28, 2023

UK commercial vehicle (CV) manufacturing grows 8.6% in most productive August since 2012. British commercial vehicle (CV) manufacturing grew 8.6% in August as 6,660 units rolled out of UK factories, according to new figures published today by the Society of Motor Manufacturers and Traders (SMMT). of everything made.

Manufacturing 145

Manufacturing 145

Manufacturer's Monthly

JUNE 28, 2023

Australian battery materials company Sicona Battery Technologies has secured a major patent acquisition, further cementing its future as a global battery materials manufacturer. In 2012, 3M announced a further investment in silicon anode materials in the form of a US$4.6million (matched) grant from the U.S. Department of Energy.

Manufacturing 98

Manufacturing Form 98

MESA

MAY 28, 2023

Navy’s Submarine Industrial Base (SIB) Program, aimed at promoting SIB careers and reinvigorating America’s manufacturing workforce through its BuildSubmarines.com initiative. This includes activations at multiple NASCAR events as well as hosting various engagements focused on promoting careers in skilled trades and advanced manufacturing.

Manufacturing 130

Manufacturing Form Advanced manufacturing Additive manufacturing 130

SMMT

NOVEMBER 25, 2022

to 85,547 units, resulting in best performance since 2012. in October, with 8,740 vans, buses, trucks, coaches and taxis rolling off British factory lines, according to the latest figures released today by the Society of Motor Manufacturers and Traders (SMMT). Year-to-date output increases 45.5% Notes to editors.

Supply Chain 105

Supply Chain Automotive Manufacturing 105

Gary Mintchell

JANUARY 19, 2023

iS5 Communications was established in 2012 and currently employs more than 40 people who specialize in bringing IIoT and IT together and who have significant engineering expertise. The post Phoenix Contact acquires iS5 Communications appeared first on The Manufacturing Connection.

Manufacturing 130

Manufacturing 130

AU Manufacturing

OCTOBER 3, 2022

Dutch electric bus manufacturer Ebusco has launched its new operational Asia Pacific headquarters in Melbourne. . Founded in 2012, the vehicle manufacturer has deployed more than 450 zero-emission buses across seven European countries, including in the major cities of Amsterdam, Frankfurt, and Munich. .

Manufacturing 81

Manufacturing Composites Aerospace Advanced manufacturing 81

AU Manufacturing

SEPTEMBER 27, 2022

Electric truck manufacturer SEA Electric has extended its commitment to the Australian market by doubling the size of its local assembly facility for zero-emission trucks in the Melbourne suburb of Dandenong. SEA Electric was founded in 2012. Media Release by SEA Electric.

Manufacturing 75

Manufacturing Freight Automotive Function 75

Gary Mintchell

MAY 10, 2023

Some writers expound upon autonomous—machines and processes that run themselves, machines and processes that are self-diagnosing and self-healing, elimination of humans from manufacturing. The company is Beekeeper , a Swiss-based company founded in 2012 to enhance the experiences of the front-line worker.

Manufacturing 147

Manufacturing 147

The Guardian Manufacturing

MARCH 17, 2024

The payment represents some long-awaited good news for more than 200 people who fell victim to what is known as “a pensions liberation fraud” during 2012 and 2013 , when they were tricked into allowing about £11.5m to be transferred out of their existing retirement plans. Continue reading.

Manufacturing 100

Manufacturing 100

Manufacturer's Monthly

FEBRUARY 14, 2024

When Ford moved manufacturing offshore, you might think that was the end of Premcar – but you would be wrong. To this day Premcar remains a go-to partner for global car manufacturers – the company currently assembles the premium Nissan Navara Warrior and Nissan Patrol Warrior at its site in Epping.

Automotive 98

Automotive Manufacturing Fit Prototype  98

Plastics News

JANUARY 26, 2023

It stressed that it continues to operate as normal, with orders still being fulfilled by its manufacturing facilities. The company operates more than 20 manufacturing sites in the U.S. S erta and Simmons were brought together in 2012 by the private equity company Advent. Serta Simmons Beddings owns several of the U.S.’s

Supply Chain 120

Supply Chain Manufacturing 120

SMMT

JULY 28, 2022

Year-to-date output increases 47.4%, resulting in best first six months to a year since 2012. CV manufacturers show resilience but urgent action is needed to protect UK competitiveness. UK commercial vehicle (CV) production grew 64.4% June production volumes were the highest since 2015 and 32.7% on 2021 and 16.6%

Automotive 95

Automotive Manufacturing 95

Gary Mintchell

JUNE 27, 2023

I named my new website 10 years ago The Manufacturing Connection because I saw that the future was not simply automation but connections of many types. Since starting at Singularity University in 2012, Authentise has focused on providing flexible, data-driven workflows in the most agile manufacturing and engineering settings.

Agile manufacturing 130

Agile manufacturing Function Additive manufacturing Robotics 130

Gary Mintchell

DECEMBER 12, 2024

Following a successful launch of the companys new product portfolio at the International Manufacturing Technology Show (IMTS) in Chicago, Rethink Robotics Inc., Recently, Lorenz spent 18 months at Robotnik, a manufacturer of in- and outdoor mobile robots in Valencia, Spain, successfully managing their integration in the group.

Robotics 130

Robotics Robotics Artificial Intelligence Automation 130

Foley

MAY 23, 2023

The FTC’s Green Guides provide guidance to product manufacturers on how to make and substantiate environmental marketing claims. when a manufacturer’s product decomposes within one year after disposal in a landfill, should that product be deemed “degradable,” or should the Green Guides provide another timeframe?

Form 97

Form Manufacturing 97

AU Manufacturing

FEBRUARY 22, 2023

“This follows on from the September and June 2022 quarters which were also higher than their comparable quarters back in 2012,” Marquardt said. “In In combination, these quarterly increases have resulted in the highest annual growth in hourly wages since December quarter 2012,” the ABS official added. The private sector recorded a 3.6

Manufacturing 85

Manufacturing 85

NIST

AUGUST 15, 2023

Manufacturing Day, or MFG Day, has grown to mean many things since it was officially proclaimed in 2012. Some celebrate on the first Friday in October with an event at a manufacturing facility or a school. Some areas have a Manufacturing Week, with multiple touch points, while others celebrate Manufacturing Month.

Manufacturing 52

Manufacturing 52

SMMT

DECEMBER 23, 2022

UK commercial vehicle (CV) manufacturing grew by 42.9% in November, with 11,343 vans, buses, trucks, coaches and taxis rolling off British factory lines, according to the latest figures released today by the Society of Motor Manufacturers and Traders (SMMT). As a result of continued strong demand, total UK CV manufacturing is up 45.1%

Manufacturing 83

Manufacturing 83

AU Manufacturing

DECEMBER 19, 2022

Mark Murray, Capral’s NSW industrial sales manager, said Allyman’s acquisition will play an integral part in Capral’s long-term commitment to supporting Australian trades and manufacturers by offering reliable access to aluminium products. . Founded in 2012, Allyman has actively serviced trades and manufacturers in the local area and beyond.

Lead Time 101

Lead Time Manufacturing 101

AU Manufacturing

SEPTEMBER 26, 2022

People are at the heart of the Australian manufacturing industry. Part 1: Why optimising your manufacturing workforce is more important than ever. This is because, like many other industries, the manufacturing industry has had a real shake-up in the wake of COVID-19. The manufacturing industry alone experienced 9.4

Manufacturing 78

Manufacturing Compliance Function 78

Canadian Manufacturing

SEPTEMBER 27, 2023

Affected Kia models include the 2010 through 2019 Borrego, the 2014 to 2016 Cadenza, 2010 through 2013 Forte, Forte Koup and Sportage, the 2015 to 2018 K900, the 2011 to 2015 Optima, the 2011 to 2013 Optima Hybrid and Soul, the 2012 to 2017 Rio, the 2011 to 2014 Sorento, and the 2010 to 2011 Rondo.

Manufacturing 85

Manufacturing 85

Manufacturer's Monthly

AUGUST 1, 2024

Image: stokkete/stock.adobe.com The Queensland Government has overseen the highest level of skills and training activity since 2012, with 244,000 students funded in VET during 2023-24, including a record 55,500 apprentices. The post Record numbers of Queenslanders in VET courses appeared first on Manufacturers' Monthly.

Manufacturing 97

Manufacturing 97

Modern Machine Shop

SEPTEMBER 11, 2024

The Miles for Manufacturing 5K (M4M), AMT’s annual community fundraising event, is celebrating 10 years at IMTS. Originating from a conversation among exhibitors during IMTS 2012, the 5K has grown in its significance, continuing to raise funds for manufacturing education and inspire future leaders in the industry and beyond.

Manufacturing 52

Manufacturing Sourcing Robotics Robotics 52

Gary Mintchell

JANUARY 17, 2024

I found during my time in manufacturing and other pursuits that asking the people who do the work for ideas on what constrains them and what could be improved constitutes one of the best uses of time a manager can spend. The news is hardly surprising that managers and workers have different views.

Sourcing 147

Sourcing Robotics Robotics Manufacturing 147

Manufacturer's Monthly

NOVEMBER 7, 2022

Northrop Grumman Corporation signed a six-year agreement with Quickstep Holdings to manufacture Australian-made components to support the global F-35 program. Northrop Grumman manufactures the centre fuselage section for all three F-35 variants.

Supply Chain 98

Supply Chain Aerospace Composites Manufacturing 98

Additive Manufacturing

SEPTEMBER 9, 2022

The ability to proactively use 3D digital data in the medical space really came to fruition with the start of additive manufacturing in the late 1980s. For example, the first-ever reported surgical implantation of a patient-specific 3D printed titanium jaw implant occurred in 2012. Credit United Therapeutics.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 98

i4.0 today

MAY 8, 2024

Mitsubishi Electric has opened a manufacturing facility for advanced factory automation (FA) systems in the Talegaon Industrial area, Maharashtra, India. www.MitsubishiElectric.com The post Mitsubishi Electric Opens New Manufacturing Plant for Factory Automation Systems in Maharashtra, India appeared first on i4.0 billion INR (24.5

Automation 52

Automation Pharmaceutical Manufacturing Beverage 52

Robotics Business Review

MARCH 28, 2024

demonstrated how its digital twin platform, developed on NVIDIA Omniverse, can help enhance smart manufacturing capabilities. In the past, automation designers, manufacturers, and users worked with different tools, but customers are now optimistic about easier collaboration, said Ou. “In 2012, Industry 4.0 At NVIDIA Corp.’s

Electronics 121

Electronics Robotics Robotics Artificial Intelligence 121

Robotics Business Review

OCTOBER 6, 2024

-based company said Unity Knee has been used in more than 75,000 surgical cases since its 2012 launch. Corin claimed that the system has demonstrated some of the best performance across the U.K. and Australian implant registries and that it is committed to growing the brand. Register now.

Robotics 115

Robotics Robotics Artificial Intelligence Function 115

Manufacturer's Monthly

JANUARY 10, 2024

2023 was the first-time enrolments have increased year on year since 2012, and demand is continuing to be strong with applications to study in 2024 up 65 per cent from two years ago. The post TAFE SA enrolments soar by 65 per cent appeared first on Manufacturers' Monthly. Certificate IV in Plumbing and Services.

Manufacturing 98

Manufacturing 98

Manufacturer's Monthly

AUGUST 29, 2024

Image: Tempi A leading international welding equipment manufacturer, Kemppi, has released its new Zeta Fresh Air welding and grinding helmets. Both the grinding and welding helmets are certified to AS/NZS 1716:2012. The new Kemppi Fresh Air W201x PFU210e welding helmet in action. The helmets also deliver comprehensive face protection.

Manufacturing 98

Manufacturing 98