Mold Making Technology

DECEMBER 1, 2024

Bureau of Labor Statistics “Back in 2011, we were already talking about a skills gap, with 600,000 job openings in manufacturing. Marion Wells , founder of Human Asset Management and MMT Editorial Advisory Board member says we've made tremendous strides in changing the perception of manufacturing. Source | U.S.

Manufacturing 52

Manufacturing Sourcing Supply Chain Additive manufacturing 52

SMMT

SEPTEMBER 28, 2023

UK commercial vehicle (CV) manufacturing grows 8.6% British commercial vehicle (CV) manufacturing grew 8.6% in August as 6,660 units rolled out of UK factories, according to new figures published today by the Society of Motor Manufacturers and Traders (SMMT). British commercial vehicle (CV) manufacturing grew 8.6%

Manufacturing 145

Manufacturing 145

Robotics Automation News

DECEMBER 30, 2024

Whats described as a bifocal modernisation strategy, implemented in 2011, is ongoing at Yoke Industrials pioneering industrial lifting equipment manufacturing facility Production at Taiwanese company Yoke Industrial Corp started in 1997. A lot has changed since, as well explore in this article.

Automation 52

Automation Robotics Robotics Manufacturing 52

Manufacturer's Monthly

APRIL 22, 2025

Organised by Prime Creative Media, the awards encompass industries such as waste management, mining, transport, manufacturing, engineering, logistics, bulk handling, rail, construction, infrastructure, and energy.

Logistics 58

Logistics Manufacturing 58

Robotics Business Review

APRIL 2, 2025

This marked a significant step in the decommissioning efforts of three reactors that lost their cooling systems during the 2011 earthquake and tsunami, leaving behind an estimated 880 tons of radioactive fuel. Mytra was founded by Chris Walti and Ahmad Baitalmal, former leaders in robotics and manufacturing at Tesla and Rivian, respectively.

Robotics 135

Robotics Robotics Apparel Automation 135

Manufacturing Tomorrow

JANUARY 10, 2025

First Mold Manufacturing Limited, established in 2011, has long been a key player in the highly competitive prototype manufacturing industry. In 2015, it was quick to spot the potential of SLS 3D printing technology and introduced advanced equipment.

3D printing 52

3D printing Prototype  Electronics Automotive 52

The Manufacturer

NOVEMBER 30, 2011

… (..)

Manufacturing 52

Manufacturing 52

Manufacturer's Monthly

JUNE 18, 2023

Australian biotechnology company Vaxxas , in partnership with the Queensland Government, today announced the opening of its global headquarters and state-of-the-art manufacturing facility in Brisbane. The post Vaxxas opens nation’s first needle-free vaccine manufacturing site appeared first on Manufacturers' Monthly.

Manufacturing 105

Manufacturing 105

Canadian Manufacturing

APRIL 2, 2025

Markus served as Head of Group Strategy at Holcim Group from 2011 to 2020, where he managed strategic projects and resource allocation across North America, Latin America, Asia Pacific, Europe, and the Middle East Africa. “We are thrilled to welcome Markus to the team,” said Apoorv Sinha, CEO of Carbon Upcycling.

Sourcing 52

Sourcing Manufacturing 52

MRPEasy

JULY 26, 2022

On a quest to raise the efficiency of a growing manufacturing operation, innovative eco bubble toy company Dr Zigs has found an invaluable asset in MRPeasy. A world leader in eco-ethical bubbles In 2011, entrepreneur Paola […]. A world leader in eco-ethical bubbles In 2011, entrepreneur Paola […].

Manufacturing 98

Manufacturing 98

AU Manufacturing

JUNE 18, 2023

Biotechnology company Vaxxas has completed work on its new needle-free vaccine technology manufacturing facility in Northshore Hamilton. It will manufacture millions of needle-free vaccine patches over the next three to five years, injecting hundreds of millions of dollars into Queensland’s economy.

Manufacturing 87

Manufacturing Advanced manufacturing 87

Gary Mintchell

SEPTEMBER 29, 2022

A bonus: Here is a link to my March 15, 2011 podcast recorded in the conference room at the company’s original headquarters in Sacramento. The post Ignition Community Conference 2022 appeared first on The Manufacturing Connection. Mostly that was doing SCADA in an IT-friendly way.

Automation 130

Automation Manufacturing 130

Robotics Business Review

SEPTEMBER 30, 2024

ARS Automation this month announced the launch of FlexiBowl 200, it latest flexible feeding system for modern manufacturing. “The FlexiBowl 200 is a game-changer for manufacturers focused on space optimization,” stated Chris Round , vice president of sales for North America at ARS Automation. ” Register now.

Automation 110

Automation Consumer Goods Robotics Robotics 110

Gary Mintchell

JUNE 5, 2023

Her 2011 presentation “How to Spot a Liar” is one of the 20 most popular TED Talks of all time. The post Four Ways to Build a Culture of Honesty and Avoid ‘Productivity Paranoia’ appeared first on The Manufacturing Connection. Bullet number two should be stimulate natural interactions.

Manufacturing 147

Manufacturing 147

Gary Mintchell

FEBRUARY 18, 2023

Here is an interview I did with two early employees from 2011. Interview with Inductive Automation 2011 And I have a new podcast recently released focusing on Twitter, AI, and Video. The post More Thoughts On Emerson and NI plus Last Newsletter appeared first on The Manufacturing Connection.

Automation 130

Automation Fit Function Manufacturing 130

Canadian Manufacturing

SEPTEMBER 27, 2023

Affected Kia models include the 2010 through 2019 Borrego, the 2014 to 2016 Cadenza, 2010 through 2013 Forte, Forte Koup and Sportage, the 2015 to 2018 K900, the 2011 to 2015 Optima, the 2011 to 2013 Optima Hybrid and Soul, the 2012 to 2017 Rio, the 2011 to 2014 Sorento, and the 2010 to 2011 Rondo.

Manufacturing 85

Manufacturing 85

Manufacturer's Monthly

AUGUST 13, 2024

Image: Tindo Solar Tindo, Australia’s only manufacturer of solar panels , announced a major expansion to its partner network that will significantly increase the availability of its products in every state and territory to meet growing demand.

Manufacturing 98

Manufacturing 98

Manufacturer's Monthly

MARCH 6, 2025

The additional board seat and Deputy Chair position were established through amendments to the Australian Renewable Energy Act 2011. The post ARENA welcomes new board member appeared first on Manufacturers' Monthly. Additionally, Angela Karl is joining the ARENA Board for the first time.

Manufacturing 58

Manufacturing 58

SMMT

APRIL 28, 2023

UK commercial vehicle (CV) manufacturing output decreased by -3.0% in March, with 9,822 vans, trucks, taxis, buses and coaches produced, according to the latest figures published today by the Society of Motor Manufacturers and Traders (SMMT). Even with the March fall, manufacturing output remains up 1.1% heading for the EU.1

Manufacturing 72

Manufacturing Supply Chain 72

Manufacturer's Monthly

SEPTEMBER 1, 2024

Image: Tindo Tindo announced a new partnership with Capral Aluminium, which will see the aluminium company provide extruded frames for Australian-made solar panels , with the potential for new onshore aluminium manufacturing to support Tindo’s proposed Gigafactory.

Supply Chain 98

Supply Chain Sourcing Manufacturing 98

Gary Mintchell

JUNE 3, 2024

Even when I ditched the manufacturing world and became a magazine editor, the cycles still affected me (and most of us, right?). The IT companies discovered that manufacturing may not be as lucrative a market as they thought.) The post Covering Industrial Market Cycles appeared first on The Manufacturing Connection.

Automation 130

Automation Form Robotics Robotics 130

SMMT

DECEMBER 23, 2022

UK commercial vehicle (CV) manufacturing grew by 42.9% in November, with 11,343 vans, buses, trucks, coaches and taxis rolling off British factory lines, according to the latest figures released today by the Society of Motor Manufacturers and Traders (SMMT). As a result of continued strong demand, total UK CV manufacturing is up 45.1%

Manufacturing 83

Manufacturing 83

Robotics Business Review

JANUARY 26, 2024

Accenture and Mujin have created a joint venture to help bring robotics and automation to the manufacturing and logistics industries. The new company will combine Mujin’s industrial robotics expertise with Accenture’s digital engineering and manufacturing service, Industry X. Manufacturing is the cornerstone of Japanese industry.

Form 126

Form Robotics Robotics Logistics 126

SMMT

NOVEMBER 30, 2023

year on year, according to the latest figures published today by the Society of Motor Manufacturers and Traders (SMMT). October’s figures solidify CV manufacturing’s strong performance in the year-to-date, up 15.3% on the same period in 2019 and representing the best 10 months since 2011. to 98,610 units – an increase of 58.6%

Manufacturing 93

Manufacturing 93

Modern Machine Shop

NOVEMBER 15, 2023

Herendeen began his 20-year career in the manufacturing industry as a sales engineer with a Midwest Mitsubishi Laser distributor, followed by running his own manufacturing consulting company for several years. Koch joined MC Machinery in 2011 as a waterjet installer. MC Machinery Systems Inc.

Automation 105

Automation Manufacturing 105

Plastics News

AUGUST 1, 2023

Their vast experience in manufacturing injection molded plastic parts enables supply and capacity of over 200 million products annually. Don Thomas, General Manager of Quantum, oversees the company’s manufacturing operations. Quantum had under 200 employees in 2011. The company footprint is over 1.3 It has over 400 today.

Cargo 98

Cargo Supply Chain Aerospace Automotive 98

Control Engineering

JULY 12, 2023

smart manufacturing and digital transformation. Control Engineering asked these questions and others about smart manufacturing and digital transformation to Jeff Winter, senior director industry strategy, manufacturing, Hitachi Solutions, and an industry expert on Industry 4.0 initiatives. Review differences in Industry 4.0,

Industry 4.0 98

Industry 4.0 Industry 4.0 Smart manufacturing Manufacturing 98

Manufacturer's Monthly

JULY 17, 2023

BAE Systems has been providing sustainment support for the Wedgetail fleet since its introduction into service in 2011 and has played a key role in ensuring the aircraft’s availability and mission readiness. The post BAE Systems Australia awarded E-7A Wedgetail contract extension appeared first on Manufacturers' Monthly.

Electronics 98

Electronics Manufacturing 98

Fabricating & Metal Work

NOVEMBER 14, 2024

Since its inception in 2011, the Careers in Welding Mobile Experience has been a beacon of welding education and career exploration. Their sponsorship will enable us to continue to promote welding as a rewarding career path and highlight the essential role the manufacturing workforce plays in our nation’s defense.”

Sourcing 52

Sourcing Manufacturing 52

Manufacturer's Monthly

MARCH 24, 2025

The acquisition of Wittenbaker Engineering Services is a strategic move that significantly bolsters Motion’s growth strategy in the Asia-Pacific region, particularly in manufacturing, design, and project execution, Fitzpatrick said. Fitzpatrick emphasised Wittenbakers strengths as a key fit for Motion.

Supply Chain 58

Supply Chain Logistics Fit Lead Time 58

i4.0 today

DECEMBER 16, 2024

They not only ensure precise and fast production but are also central to the manufacture of exterior parts such as doors or bonnets and interior components such as seat frames. In 2011, the Chinese company NEVS (National Electric Vehicle Sweden) took over the factory to produce electric cars in addition to SAAB cars.

Automotive 52

Automotive Supply Chain Robotics Robotics 52

Manufacturer's Monthly

MARCH 20, 2023

2011 – Safe Use of Cranes, Hoists & Winches. The post Free onsite hoist safety handling training appeared first on Manufacturers' Monthly. The SOS will teach your operators the importance of a pre-operational inspection and ensure they are conducted correctly to ensure compliance with AS 2550.1-2011

Compliance 98

Compliance Sourcing Manufacturing 98

Automation Mag

JANUARY 27, 2023

It is not enough to ensure that automation equipment manufacturers are following the proper safety standards. It is of primary importance for the end-user (manufacturers) to understand the latest safety standards and requirements and make sure that it is safe to work with and around the newly installed equipment.

Automation 75

Automation Manufacturing Robotics Robotics 75

Robotics Business Review

DECEMBER 4, 2024

Developing the new M16 connector was particularly challenging, said binder, because it had to comply with both the M16 standard (DIN EN 61076-2-106) and the stringent AISG standard (for the eight-pin shielded variant) in terms of IP68 sealing and compatibility between different manufacturers.

Quality Management System 52

Quality Management System Process control Fit Robotics 52

AU Manufacturing

OCTOBER 16, 2022

was coined in Germany in 2011, referring to the fourth industrial revolution. It is the convergence of very specific technologies that have been implemented in manufacturing over the years. Perspective | The Digital Foundation for Smart Manufacturing in Food & Beverage’. . appeared first on Australian Manufacturing.

Industry 4.0 72

Industry 4.0 Industry 4.0 Beverage Manufacturing 72

Manufacturer's Monthly

NOVEMBER 14, 2022

Sevaan Group, a dedicated, metal component and product manufacturing firm in Australia, recently announced that this year marks the Group’s 25th anniversary. . In 2011 Proline Technologies acquired Wisby & Leonard to form Sevaan Group. For more information see here.

Electronics 97

Electronics Form Manufacturing Robotics 97

SMMT

JANUARY 17, 2023

Grey is officially the nation’s favourite new car ‘colour’ for the fifth year in a row, with more than a quarter (25.7%) of UK buyers choosing the shade in 2022, according to the latest figures released today by the Society of Motor Manufacturers and Traders (SMMT). market share in 2022 – its lowest level in more than two decades.

Fit 140

Fit Manufacturing 140