SMMT

OCTOBER 5, 2022

The UK new car market recorded its second successive month of growth in September, with registrations rising 4.6%, according to the latest figures released today by the Society of Motor Manufacturers and Traders (SMMT). below pre-pandemic levels as the industry continues to battle issues constraining supply to fulfil a backlog of orders.

Supply Chain 144

Supply Chain Manufacturing 144

ATS

JUNE 15, 2023

Share Reshoring has been one of the top manufacturing trends discussed over the past decade. What is reshoring in manufacturing? The term refers to the practice of bringing offshore production processes – those carried out in a country other than a manufacturer’s home country — back to domestic facilities.

Supply Chain 52

Supply Chain Manufacturing Logistics Industry 4.0 52

Modern Machine Shop

APRIL 27, 2023

When it qualified as a Modern Machine Shop Top Shop in 2011, BDE Manufacturing Technologies (then known as Bob’s Design Engineering) was a prototyping shop just starting to move into production work. The shop’s 64-pallet Fastems flexible manufacturing system is currently connected to two Okuma four-axis mills.

Prototype  98

Prototype  Rapid prototyping Bill of Materials Supply Chain 98

Canadian Manufacturing

MARCH 15, 2024

Nissan is relatively ahead in EVs among Japanese automakers because it was among the first to come out with an EV with its Leaf, which went on sale in late 2010. But Toyota is also expected to aggressively deliver on an EV push in coming years.

Supply Chain 94

Supply Chain Automotive Manufacturing 94

AU Manufacturing

OCTOBER 4, 2022

APPEA Chief Executive Samantha McCulloch said the growing returns for the Australian public from exports were shown after the industry had invested over $300 billion in LNG projects since 2010. The Federal Government estimates Australia’s LNG has the potential to lower emissions in.

Supply Chain 71

Supply Chain Manufacturing 71

Manufacturing & Logistics IT

JANUARY 9, 2020

In 2010, many warehouses would still have been regarded as a neglected cost centre. Now, moving into 2020, the warehouse is a carefully managed control centre and very often the strategic hub of e-commerce within an ever-extending supply chain.

Supply Chain 40

Supply Chain 40

i4.0 today

MAY 10, 2024

PDSL has been delivering leading-edge engineering and digital technology solutions since 2010, for clientele like OEMs Jaguar Land Rover, Aston Martin, Volkswagen, Bentley, Lotus, McLaren, Rivian, VInFast, Polestar, Volta Trucks, Panasonic and LG. The development of the product has begun, and the launch will be planned during early 2025.

Supply Chain 52

Supply Chain Automotive Industry 4.0 Industry 4.0 52

Manufacturer's Monthly

APRIL 15, 2024

Image: BluGlass BluGlass Limited, a Silverwater-based semiconductor manufacturer, recognised potential for growth since its humble beginnings at Macquarie University. The type of semiconductor BluGlass is manufacturing is called gallium nitride or GaN for short; in particular we’re focused on making GaN lasers.”

Electronics 105

Electronics Manufacturing Artificial Intelligence Supply Chain 105

SMMT

JANUARY 26, 2024

The latest industry figures out this week show what a difference a year can make, with UK vehicle manufacturing output topping one million units in 2023, for the first time since 2019. Receding supply chain constraints and unprecedented levels of investment helped put the sector firmly back on track.

Supply Chain 52

Supply Chain Automotive Advanced manufacturing Sourcing 52

Mold Making Technology

JANUARY 5, 2023

Hiccups in the global supply chain exacerbated by the pandemic have fueled the reshoring trend. Since 2010, the total jobs announced would top 1.6 incentives to bring manufacturing back. Photo Credit: Getty Images. Reshoring noted that new investments in U.S. “It also indicates that U.S.

Pharmaceutical 52

Pharmaceutical Supply Chain Electronics Robotics 52

SMMT

JULY 11, 2024

It reflects a big commitment to sustainability from the whole auto industry but particularly the commercial vehicle sector, given eight of the UK’s vehicle factories produce trucks, vans and buses – and last year delivered decarbonisation while at a time turning out the largest volumes of commercial vehicles in any year since 2010.

Automotive 49

Automotive Supply Chain Manufacturing 49

Fastener News Desk

APRIL 25, 2023

and later being rebranded as QFC, the company is a distributor of fasteners and other small components to a diverse group of manufacturing and assembly customers in the United States, Mexico, Europe and China. AFC supports a diverse base of manufacturers across a broad range of industries. www.bertramcapital.com ).

Supply Chain 52

Supply Chain Sourcing Manufacturing 52

Fastener News Desk

AUGUST 3, 2022

New Orders and Employment Contracting; Production and Backlogs Growing; Supplier Deliveries Slowing at a Slower Rate; Raw Materials Inventories Growing; Customers’ Inventories Too Low; Prices Increasing at a Slower Rate; Exports and Imports Growing; Record-Long Lead Times for Production Materials and MRO Supplies. TEMPE, Ariz. , Aug.

Manufacturing 52

Manufacturing Electronics Beverage Apparel 52

Canadian Manufacturing

MAY 23, 2024

a bus and coach manufacturer involved in zero-emission electric mass mobility solutions, announces the selection of John Proven as the new President of NFI Parts and ARBOC Specialty Vehicles (ARBOC). John brings experience in global markets and leadership of geographically diverse operations in manufacturing environments.

Manufacturing 52

Manufacturing Supply Chain Automotive 52

Dinesh Mishra

MAY 2, 2023

Today, India is the world’s fifth largest economy measured by manufacturing output. According to World Bank data, India´s manufacturing value added in 2021 was USD 443.9 China´s robot density hit 131 units in 2010 and skyrocketed to 772 units in 2021. This corresponds to an average annual growth rate of 16% since 2016.”

Robotics 52

Robotics Robotics Automotive Pharmaceutical 52

Manufacturer's Monthly

MAY 15, 2023

First held in 2010 and alternating between Melbourne and Sydney, Electronex is Australia’s major exhibition for companies using electronics in design, assembly, manufacturing and service in Australia. Electronex – The Electronics Design and Assembly Expo – returned to the Melbourne Convention and Exhibition Centre on 10 -11 May 2023.

Electronics 52

Electronics Artificial Intelligence Supply Chain Manufacturing 52

Canadian Manufacturing

APRIL 16, 2024

Nissan was an EV pioneer, introducing the all-electric Leaf in 2010. They said the company had come up with key, unique materials for the batteries, including a metal form of lithium. The company said it plans to offer solid-state batteries in a range of models, including pickup trucks. “We

Form 52

Form Supply Chain Automotive Manufacturing 52

SMMT

MAY 30, 2024

The NIT began its partnership with Transaid in 2010, under the shared goal of providing quality driver training and reducing traffic accidents. Ian Cooper, Samworth Brothers Supply Chain Regional Fleet Manager, said: “This is the fourth training vehicle we have donated, and we are proud to see it supporting such a great cause.

Logistics 59

Logistics Freight Supply Chain Fit 59

Canadian Manufacturing

SEPTEMBER 28, 2022

The fab equipment industry last saw a YOY growth rate of 8% in 2010, when it topped 16 million wafers per month (200mm equivalents) – nearly half of the 29 million wafers per month (200mm equivalents) projected for 2023. The SEMI World Fab Forecast report shows a global capacity increase nearing 8% in 2022, reaching 7.7%, after a 7.4%

Supply Chain 52

Supply Chain Advanced manufacturing Electronics Manufacturing 52

SMMT

AUGUST 22, 2024

Manufacturers believe the fuel – designed to be used with the latest Euro-6 vehicles – can reduce CO2 emissions by up to 90%. The decision supports the company’s commitment to achieve net zero emissions by 2050, with the plan to achieve an initial 50 per cent reduction in CO 2 emissions by 2030, versus 2010 levels.

Supply Chain 52

Supply Chain Sourcing Logistics Manufacturing 52

Fastener News Desk

SEPTEMBER 6, 2022

It provides traditional fasteners, construction products, industrial supplies, and specialty products to a wide range of construction- and manufacturing-related industries. If the projection is achieved, 2022 will bring the total jobs announced since 2010 to over 1.6 In Manufacturing News…. ?? IFE Exhibitors!

Supply Chain 52

Supply Chain Manufacturing Sourcing 52

Canadian Manufacturing

JANUARY 26, 2023

over “unintended acceleration,” in 2010, when he appeared before Congress. The handover appears to be the company’s effort to give the leadership team a younger face, while maintaining the general vision and philosophy of the company, famed for founding “just in time” manufacturing and for quality products.

Prototype  40

Prototype  Supply Chain Manufacturing Automotive 40

Frost & Sullivan Manufacturing

OCTOBER 6, 2022

We see the key components of a scalable and profitable autonomous vehicle business– regulatory, technology, and supply chain– coming together around the end of 2023. We are seeing a few shuttle operators partner with OEMs to manufacture their own custom-made vehicles. How do you work with cities and communities?

Form 52

Form Supply Chain Sourcing Robotics 52

Fastener News Desk

AUGUST 31, 2023

In this role, he oversaw Manufacturing, Purchasing, Warehouse, and IT. They launched the industry renowned Fully Threaded Radio podcast in 2010 to promote their growing digital platform. Founded in 1981 it serves all reaches of the supply chain, from manufacturer to distributor to OEMs, and features nearly 70 product categories.

Supply Chain 52

Supply Chain Sourcing Manufacturing 52

Manufacturer's Monthly

JULY 15, 2024

Image: zinkevych/stock.adobe.com Globally, manufacturing has become a prime target for Cyberattacks. We spoke with an industry expert to find out how manufacturers can manage the risk of cyber-attacks and equip themselves with the skills necessary to safeguard their businesses. million, marking a nearly 15 per cent increase.

Supply Chain 97

Supply Chain Manufacturing Sourcing Form 97

SMMT

MAY 30, 2024

UK CV manufacturing declines -19.9% lead in first four months – the best year to date performance since 2010. UK commercial vehicle (CV) manufacturing fell by -19.9% April’s decline reflects some temporary supply chain shortages and normalisation of the market following high levels of pent-up demand post-Covid.

Supply Chain 69

Supply Chain Manufacturing 69

Gary Mintchell

APRIL 5, 2023

On the other hand, I always felt it foolish to ship jobs out of the country resulting in less manufacturing here. Not that I’m in favor of war, but it is the manufacturing/industrial complex that wins wars. It definitely weakens a country to not have manufacturing. manufacturing by 40%, 5 million jobs. million. ·

Supply Chain 130

Supply Chain Manufacturing 130

SMMT

SEPTEMBER 26, 2024

CV manufacturing falls -10.0% to 78,805 units marking best year-to-date performance since 2010. British commercial vehicle (CV) manufacturing fell -10.0% in August, following July’s rise, as 6,044 units rolled out of UK factories, according to new figures published today by the Society of Motor Manufacturers and Traders (SMMT).

Supply Chain 78

Supply Chain Manufacturing 78

Modern Machine Shop

FEBRUARY 22, 2023

Photo Credit: Reshoring Initiative United Grinding North America announces its sponsorship of the Reshoring Initiative , a nonprofit organization dedicated to bringing manufacturing jobs back to the United States. Our mission is to reverse offshoring and bring five million manufacturing jobs to the U.S.”

Supply Chain 98

Supply Chain Lead Time Manufacturing 98

Manufacturer's Monthly

NOVEMBER 28, 2023

I was convinced that meeting our climate goals was an issue of investment, partnering with the global supply chain and establishing a sovereign manufacturing capability—somewhat typical of ‘engineer thinking’. By the time the Summit concluded, I had made a complete about-face.

Supply Chain 122

Supply Chain Sourcing Manufacturing Form 122

Foley

JULY 11, 2023

Agility and resiliency remain essential attributes for manufacturers in 2023. Manufacturers are no longer focused on figuring out when things will return to “normal.” Most major automobile manufacturers have set aggressive goals to electrify their fleets, many in the range of 40-50% by the mid-2030s.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40

Canadian Manufacturing

OCTOBER 19, 2023

.” O’Regan said the goal of the latest review is to “examine the structural issues underlying” the dispute that saw strike action in July, adding that Canada needs to demonstrate that it has a stable supply chain. No work was ever done to implement that recommendation.

Cargo 97

Cargo Supply Chain Automation Manufacturing 97

Canadian Manufacturing

MAY 12, 2023

provided an update regarding its development of a vertically integrated patterned solar glass manufacturing facility. “We are excited to have reached this important stage in the development of our integrated solar glass manufacturing project. In August 2022, Meyer Burger announced a long-term agreement for supply of modules to D.E

Supply Chain 40

Supply Chain Manufacturing 40

Modern Machine Shop

OCTOBER 1, 2024

The award was given in recognition of Sumitomo Drive Technologies’ success in bringing manufacturing to the United States through foreign direct investment and to Mexico via nearshoring. Joe Gopi, director of manufacturing, Sumitomo Drive Technologies, received the award on the IMTS+ Main Stage on behalf of Sumitomo Drive Technologies.

Supply Chain 52

Supply Chain Form Additive manufacturing Sourcing 52

Fastener News Desk

SEPTEMBER 5, 2022

Multiple Supply Chain Risks Drive Reshoring Opportunities. In 2021 the private and federal push for domestic supply of essential goods propelled reshoring and foreign direct investment (FDI) job announcements to a record high. If the projection is achieved, 2022 will bring the total jobs announced since 2010 to over 1.6

Supply Chain 52

Supply Chain Compliance Lead Time Manufacturing 52

Frost & Sullivan Manufacturing

AUGUST 28, 2024

The global biomanufacturing capacity gap and budget constraints have ignited the “The Fourth Revolutionary Wave of Biologics Manufacturing”, with production sites expanding towards million-liter scales. In this context, Contract Development and Manufacturing Organizations (CDMOs) have become key players in global biomanufacturing.

Manufacturing 52

Manufacturing Sourcing Cycle time Pharmaceutical 52

SMMT

DECEMBER 22, 2023

UK commercial vehicle (CV) production grew again in November, according to the latest figures published today by the Society of Motor Manufacturers and Traders (SMMT). Year-to-date output surges 15.5% to 111,863 units with new production facilities boost to volumes. Factories produced 13,253 vans, buses, trucks, coaches and taxis, up 16.8%

Supply Chain 80

Supply Chain Automotive Manufacturing 80