Robotics Business Review

APRIL 17, 2024

Boston Dynamics began with humanoids by sawing one of its pneumatically powered quadrupeds in half back in 2009. Source: Boston Dynamics “Everything we understood, from the time of launching Spot as a prototype to it being a reliable product deployed in fleets, is going into the new Atlas,” Playter said.

Robotics 131

Robotics Robotics Artificial Intelligence Automotive 131

E&T

OCTOBER 1, 2023

But the key driver behind the missions to the lunar south pole was the discovery of high concentrations of ice in the area in 2009. Scientists have even discussed the possibility of finding helium-3, which could fuel nuclear fusion reactors. Ice that could be melted into water, or turned into oxygen and rocket fuel.

Electronics 64

Electronics Sourcing Manufacturing 64

i4.0 today

FEBRUARY 8, 2024

With the 2009 expiration of a key Stratasys patent that covered thermoplastic filament extrusion technology, desktop filament printers were taking off, buoyed by new disrupters like Makerbot. There will be additional consideration of the energy sources used to power energy-intensive printing technologies.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Composites 52

Fastener News Desk

OCTOBER 5, 2023

Mike Barton, who has been the President of Keidel since 2009, and John Robinson, who has been Executive V.P. Website: WinSupplyInc.com SOURCE: WinSupply RELATED CONTENT: IFE 2023 Sessions: Ignite Your Passion, Expand Your Knowledge! . “We knew this was an opportunity to partner with a great company in our backyard.

Fit 52

Fit Sourcing Manufacturing 52

E&T

MAY 5, 2023

His Rainforest Project played a significant role in negotiating an agreement that resulted in Norway paying $250m to Guyana in 2009, in exchange for the country limiting its annual deforestation rate to 0.056 per cent over the following five years. In 2020, Charles also launched the Sustainable Markets Initiative (SMI).

Sourcing 111

Sourcing Form 111

Robotics Business Review

NOVEMBER 11, 2024

Source: Adobe Stock While headlines often spotlight U.S. ANYbotics (Switzerland) emerged from pioneering work at ETH Zurich in 2009 and was officially founded in 2016. Europe is a major center of robotics development and use, according to Humanoid. It has made strides in autonomous robots for industrial applications.

Robotics 114

Robotics Robotics Automation Automotive 114

E&T

OCTOBER 16, 2023

Such attitudes have been reinforced by the funding for fusion, whether from national or European sources, which was only ever for research, never commercialisation. This was stated to me by my MP, a minister, when he made enquiries on my behalf a few years ago. Meanwhile, the benefits remain unconvincing, and completion is still out of sight.

Sourcing 52

Sourcing Manufacturing 52

Fastener News Desk

AUGUST 1, 2024

In the last eight months, the Supplier Deliveries Index has recorded its eight lowest readings since March 2009 (43.2 The Employment Index dropped further into contraction, registering 44.4 percent, down 3.7 percentage points from June’s reading of 48.1 rob202407pmi “The Supplier Deliveries Index figure of 46.1 percent is 0.4

Manufacturing 52

Manufacturing Beverage Composites Apparel 52

Dinesh Mishra

NOVEMBER 30, 2023

In 2009, after completing the Advanced Management Program at Harvard Business School, I moved to China to establish and head LMW’s greenfield project for manufacturing textile spinning machinery. Image 1: source: DMG Mori. October, 2019 Link Q4. This led to his promotion to Vice President – Supply Chain Management.

Supply Chain 52

Supply Chain Aerospace Automotive Cycle time 52

Modern Machine Shop

AUGUST 3, 2023

The Disney Acquisition James Disney, a local shop owner who founded Independent Machining in 2009, had a problem: customer demand had increased so much during the COVID pandemic that he was growing out of his shop. JBS says this CNC-machined part was used for a well-known rock artist’s rotating concert stage.

Beverage 98

Beverage Lead Time Sourcing Manufacturing 98

Fabricating & Metal Work

OCTOBER 1, 2022

The financial crisis of 2008 and 2009, while some would argue should have been evident, caught most people off guard. An aerospace parts manufacturer in the Southeast United States had an outsourced plating operation that was going out of business, leaving them without a source for the finishing service.

Compliance 96

Compliance Aerospace Lead Time Form 96

Fastener News Desk

FEBRUARY 3, 2023

percent recorded in December; the last two readings are the index’s lowest since March 2009 (43.2 The Supplier Deliveries Index figure of 45.6 percent is 0.5 percentage point higher than the 45.1 The Inventories Index registered 50.2 percent, 2.1 percentage points lower than the seasonally adjusted December reading of 52.3 percent.

Manufacturing 52

Manufacturing Lead Time Beverage Supply Chain 52

MEM

DECEMBER 15, 2022

Silvan Staufert, the concept of a novel catalyst for micropollutant degradation was built into a scalable technology platform that is able to address the problem where it matters: at the source, before they enter waterways.

Pharmaceutical 52

Pharmaceutical Consumer Goods Value chain Sourcing 52

Fastener News Desk

JUNE 7, 2023

percent recorded in April; this is the index’s lowest reading since March 2009 (43.2 ” [Transportation Equipment] “Pricing seems to be becoming the primary focus of supply and sourcing teams, as customers and consumers are beginning to push back. The Supplier Deliveries Index figure of 43.5 percent is 1.1

Manufacturing 52

Manufacturing Supply Chain Beverage Composites 52

E&T

DECEMBER 6, 2022

Figures show that between 1979 and 2009, tropical cyclones globally were 8 per cent more likely to reach categories 3 to 5 on the Saffir-Simpson scale (see ‘Hurricane strength and damage categories’), while in the Atlantic the percentage is 49.

Sourcing 56

Sourcing Manufacturing 56

Fastener News Desk

JANUARY 8, 2023

percent; this is the index’s lowest reading since March 2009 (43.2 The month-over-month performance of supplier deliveries was the best since March 2009. This reading indicates the fastest supplier delivery performance in 165 months ( March 2009 , when the index registered 43.2 SOURCE Institute for Supply Management.

Manufacturing 52

Manufacturing Beverage Electronics Apparel 52

Fabricating & Metal Work

JUNE 5, 2023

ECM has since experienced exponential growth spanning the globe over the last 20 plus years. In 2009, Mr. Confalone joined the newly formed Certification Committee of the Coordinate Metrology Society (CMS).

Advanced manufacturing 52

Advanced manufacturing Sourcing Aerospace Form 52

i4.0 today

AUGUST 17, 2022

Source: IDTechEx – “ Electric Cars 2023-2043 “ . Moreover, in August 2022, plans to modernize the EV federal tax credit, first introduced in 2009, have narrowly been passed. In the following article, IDTechEx outlines recent developments in key markets and discusses the corresponding impact on forecasts.

Electronics 52

Electronics Automotive Sourcing Industry 4.0 52

E&T

OCTOBER 13, 2022

Sandvik was an early pioneer of electrical vehicles, introducing its first electric loader truck back in the 1980s, and subsequently released the first electric and automated LHD (load, haul, dump vehicle) in 2009. In over two million hours of operation, there have been zero accidents involving workers, an enviable record.

Automation 85

Automation Robotics Robotics Artificial Intelligence 85

Plastics News

NOVEMBER 8, 2022

Many have eyed hydrogen's tantalizing potential as an abundant and pollution-free energy source for transportation and beyond. Jules Verne described a method in which "water will one day be employed as fuel," and wrote hydrogen and oxygen will "furnish an exhaustible source of heat and light" in his 1874 novel The Mysterious Island.

Cargo 52

Cargo Sourcing Fit Freight 52

Foley

JULY 11, 2023

Companies that may be concerned about the viability or performance of a supplier should consider seeking licenses or other rights that would enable to obtain vital components from another source if the supplier does not meet its obligations. Different sources have articulated different definitions. For example, courts and the U.S.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40

Manufacturer's Monthly

SEPTEMBER 22, 2024

The government response was a sensible one – the encouragement of a “China-plus one” strategy to try to shift our economy from what was an unhealthy over-reliance on one market or one source. per cent of G20 imports were affected by import restrictions implemented by G20 economies since the Global Financial Crisis in 2009. Why is that?

Artificial Intelligence 87

Artificial Intelligence Industry 4.0 Industry 4.0 Sourcing 87

i4.0 today

APRIL 28, 2023

“This saves us time and ensures critical contract language is not overlooked, while giving us a single source of contract information to help eliminate disconnects between departments.”

Compliance 52

Compliance Artificial Intelligence Form Sourcing 52

E&T

AUGUST 9, 2022

Clean water is humanity’s most important utility, yet World Health Organization (WHO) figures show that in 2020, one in four people still did not have access to a safely managed drinking water source. In 2009, 1.16 Water is not only essential to our health, but also that of livestock and crops – and therefore food security.

Sourcing 85

Sourcing Fit Electronics Form 85