Robotics Automation News

DECEMBER 21, 2023

While the introduction of cryptocurrency back in 2008 was revolutionary, it wasn’t the concept of cryptocurrency itself that was truly groundbreaking – it was the network that cryptocurrency operates on. […] Microsoft has quietly undergone a major change in their security leadership.

110

110

Universal Robots

DECEMBER 13, 2022

When the first cobot was introduced in 2008, it came with a vision for the future of automation. A world where robots work around people, and not the other way around.

Robotics 52

Robotics Robotics Automation 52

Canadian Manufacturing

APRIL 24, 2024

JOHN’S — Kraken Robotics Inc. Mr. Hunter was Chairman of Hydroid from its early days to its eventual acquisition by Kongsberg Maritime, AS in 2008. Kraken Robotics Inc. is a marine technology company providing complex subsea sensors, batteries, and robotic systems. announces that effective April 23, Peter A.

Robotics 52

Robotics Robotics Manufacturing Electronics 52

Manufacturer's Monthly

JULY 11, 2023

Author: Geoff Crittenden, CEO, Weld Australia But, with the advent of automation, robots, cobots and a range of other advanced welding technologies and techniques, this perception is becoming more and more outdated. robots and cobots Automation, Industry 4.0, Welding is a far less dangerous and arduous job than ever before. Industry 4.0

3D printing 97

3D printing Industry 4.0 Industry 4.0 Robotics 97

Automation Mag

JUNE 27, 2022

Universal Robots (UR) launched a new 20-kilogram cobot called the UR20, at the Automatica trade fair in Munich, Germany. The UR20, the latest addition to the company’s portfolio of cobots, features a new design based on Universal Robots’ experience in engineering.

Robotics 52

Robotics Robotics Cycle time 52

Fabricating & Metal Work

JUNE 6, 2023

Universal Robots, Joseph F. Engelberger Robotics Award, Esben Østergaard, Roberta Nelson Shea, Kim Povlsen, robotics safety, cobots For the second time within five years, a key figure at Universal Robots (UR), the Danish manufacturer of collaborative robots (cobots), has been awarded the world’s most prestigious robotics prize, the Joseph F.

Robotics 52

Robotics Robotics Compliance Automation 52

Universal Robots

DECEMBER 21, 2018

Linatex, a Danish manufacturer of specialized plastic and rubber components, became Universal Robots’ first customer with the purchase of a UR5 collaborative robot in 2008. One decision has proven itself for 10 years.

Robotics 52

Robotics Robotics Manufacturing 52

Automation Mag

MARCH 7, 2023

OTTO Motors was named to Fast Company’s Most Innovative Companies for 2023 as a top 10 global robotics company. In 2008, we had this crazy idea that self-driving technology would revolutionize transportation inside factories and warehouses long before mainstream adoption,” said Matt Randall, co-founder and CEO of OTTO Motors.

Robotics 45

Robotics Robotics Manufacturing 45

Fabricating & Metal Work

SEPTEMBER 4, 2023

FABTECH 2023 attendees will witness a monumental leap in collaborative robot technology when Kane Robotics showcases its GRIT TM at North America’s paramount event for metal forming, fabricating, welding, and finishing. Join Kane at FABTECH 2023 and say goodbye to grinding and sanding like robots and hello to collaborating with them.

Robotics 52

Robotics Robotics Composites Automation 52

Modern Machine Shop

SEPTEMBER 13, 2024

In 1988, the robot hand was introduced. IMTS 2008: The show became a six-day event with over 90,000 visitors in attendance. IMTS 2016: Additive manufacturing, robotics automation and an increasing digital thread were the primary focus. In 1982, Technical Conference sessions were added. The Miles for Manufacturing 5K was held.

Robotics 52

Robotics Robotics Additive manufacturing 3D printing 52

AU Manufacturing

NOVEMBER 14, 2022

David completed his apprentice early, and is undertaking additional training that will see him take on the role of Manager of the Bossong PTA division, overseeing several robots and completing jobs for customers in the oil and gas industry. David Jonas from Bossong Engineering was named the 2022 Young Trades Person of the Year.

Robotics 96

Robotics Robotics Manufacturing 96

Automation Mag

JULY 4, 2023

As an integrator, I love how robot, sensor, actuator, and controls hardware manufacturers have continuously innovated because we are able to provide robotic automation solutions to our customers in new ways. I have seen enormous growth in the technical offerings in the washdown and hygienic side of the food industry in particular.

Automation 64

Automation Robotics Robotics Manufacturing 64

Manufacturer's Monthly

MAY 30, 2023

In 2008, Xavier Orr was digging deep into the world of neural networks in his final year of artificial intelligence studies at the University of Western Australia. Today, the Australian-based company is making moves in the futuristic worlds of self-driving cars, aerial drones, space launch vehicles and robotics.

Robotics 98

Robotics Robotics Aerospace Artificial Intelligence 98

Canadian Manufacturing

MARCH 2, 2023

OTTO Motors named to Fast Company’s 2023 list of Most Innovative Companies (Credit: OTTO Motors) KITCHENER — OTTO Motors, a provider of autonomous mobile robots (AMRs), announced that it has been named to Fast Company’s Most Innovative Companies for 2023 as a top 10 global robotics company. “In

Robotics 45

Robotics Robotics Manufacturing Electronics 45

E&T

NOVEMBER 15, 2022

In the last few months, Amazon has shut down a range of new services it was exploring, including its telehealth service, a roving delivery robot and a video-calling projector for kids. Two weeks ago, Amazon announced a hiring freeze and its workforce has already decreased compared to the beginning of the year.

Sourcing 75

Sourcing Robotics Robotics 75

Fabricating & Metal Work

APRIL 27, 2023

Additionally, the company will showcase its XYZ robot dispensing tables and A100 benchtop dispensing unit. ReAct adhesives are two-component, room-temperature-cure adhesives that are ideal for use in demanding applications that require a strong, permanent bond. The spotlight will be on Hernon’s ReAct Acrylic Adhesive line.

Composites 40

Composites Robotics Robotics Manufacturing 40

Control Engineering

NOVEMBER 30, 2022

The Association for Advancing Automation (A3) offers programs for system integrators in the fields of robotics, machine vision and motion control. Individual robot and automation vendors can offer training on their specific products, but industry associations can go deeper with an emphasis on multiple technologies.

Automation 52

Automation Robotics Robotics Sourcing 52

Manufacturer's Monthly

AUGUST 3, 2022

The facility in Hallam has several robotic assembly lines linked with modern automated component storage and test facilities, using the highest quality equipment. Subsequent launch of tooling and preparation for serial production coincided with the 2008 GFC. LED Lighting for mining.

Electronics 98

Electronics Prototype  Fit Assembly Line 98

Canadian Manufacturing

MARCH 11, 2024

Since 2008, the vice‑presidency of this family‑run SME has been assumed by Julie Leclerc. Thanks to the $1M repayable contribution from CED, the business will be able to acquire and commission a digital machining centre and robotic production equipment, including three welding cells, a laser cutter, and a folding press.

Function 40

Function Robotics Robotics Automation 40

E&T

MARCH 14, 2023

Industrial motors are used to control torque and speed on conveyor belts, robotic arms, automated guided vehicles and in compressors to regulate the volume of air, gas or liquid running through pipes. Making more energy-efficient motors available will contribute to reduced CO2 emissions and help countries achieve net-zero targets.

Lead Time 96

Lead Time Manufacturing Function Robotics 96

Manufacturer's Monthly

SEPTEMBER 7, 2022

Years into his career in measurement science as a consulting surveyor, the co- founder and CEO of Kurloo Technology, Lee Hellen, began his first commercial business in 2008. Three years later, Hellen’s team worked on the South Point project in Brisbane, with very heavily constrained tunnels and heritage buildings to deal with.

Automation 98

Automation Supply Chain Industry 4.0 Industry 4.0 98

Automation Mag

OCTOBER 28, 2024

Dolsen recalls how in the 1980s there was a fascination with robots and automated guided vehicles. In the early days, a lot of robots were installed even when it may not have made any sense to add one,” he explains. The push, he says, was towards substituting direct labour with automation. “A

Automation 64

Automation Supply Chain Manufacturing Robotics 64

Modern Machine Shop

FEBRUARY 16, 2023

Thrailkill took over in 2008, when his grandfather retired. The company has several machines that can run unattended, including a laser with a double-tower system, a punch press and a laser/punch combo machine with a pallet system , a robotic bending cell, and a lathe with a bar feeder and parts catcher.

Overall Equipment Effectiveness (OEE) 105

Overall Equipment Effectiveness (OEE) Aerospace Lead Time Robotics 105

E&T

DECEMBER 5, 2022

The first docked bike-sharing program was launched in Hangzhou, China, in 2008, and similar programs are operating in every region of the world today. With armies of gaudy, primary-coloured e-bikes and e-scooters, the micromobility industry is conquering our towns and cities.

Cargo 81

Cargo Form Robotics Robotics 81

Additive Manufacturing

MARCH 8, 2023

Using proprietary 3D printing robotics, software and advanced materials, ICON is shifting the paradigm of homebuilding on Earth and beyond. Built in 2008 and with a local history that spans many more generations, we are dedicated to elevating Austin’s creative sector.

3D printing 64

3D printing Form Fit Additive manufacturing 64

MEM

DECEMBER 19, 2022

Founded in 2008, Metecno Oy is a Finnish, family-owned special purpose machine manufacturer with expertise in CNC machines, automation design and robotic integration. Background.

Food Production 52

Food Production Manufacturing Automation Robotics 52

Frost & Sullivan Manufacturing

OCTOBER 6, 2022

Edwin Olson earned a PhD from MIT in 2008 in Computer Science and Electrical Engineering, and is on leave from the University of Michigan, where he is a Professor of Computer Science. Olson has worked on autonomous vehicles for over a decade, including work on the 2007 DARPA Urban Challenge and vehicles for Ford and Toyota Research Institute.

Form 52

Form Supply Chain Sourcing Robotics 52

Fabricating & Metal Work

APRIL 4, 2024

EMH is ISO 9001:2008 certified. Following our certified piCOBOT and piCOBOT L adaptations for FANUC’s CR4/CR7 and LR Mate 200 robots, it was natural to apply the same matched setup on their CRX range,” said Madeleine Sheikh, product manager of Piab Vacuum Automation division. Seegrid Corp.

Automation 40

Automation Warehousing Robotics Robotics 40

Control Engineering

JULY 19, 2022

To address these and other issues, OPC UA (OPC Unified Architecture) was released in 2008. This model represents a fundamental shift, introducing artificial intelligence (AI), analytics and advanced robotics into traditional manufacturing. Architecture not optimized for the internet. . Limited data type handling. OPC UA and MQTT.

Industry 4.0 52

Industry 4.0 Industry 4.0 Overall Equipment Effectiveness (OEE) Artificial Intelligence 52

Fabricating & Metal Work

NOVEMBER 16, 2024

He is one of the company’s robot programmers. The cobot is a tool for the welder,” said Dan Colvin, ESAB’s vice president for North America Robotics & Digital Solutions. “It Industrial robot companies have been competing against each other with old interfaces and programming systems that have been around for decades.

Robotics 52

Robotics Robotics Automation Function 52

Fabricating & Metal Work

MARCH 17, 2023

For even greater manufacturing efficiency, we are able to provide our hydraulic press customers with turnkey, state-of-the-art robotic and other product handling solutions.” SmartView requires Windows 7 or newer versions (Windows 2008 Server or newer). s CEO Jerry Letendre.

3D printing 52

3D printing Form Automation Cycle time 52

Modern Machine Shop

MARCH 6, 2023

Photo Credit: Shape Technologies Group Shape Technologies Group , a supplier of waterjet technology, robotic automation and ultra-high-pressure (UHP) manufacturing process solutions, announce that Nino LaDuca, current president of Shape Process Automation, has been named the new president and CEO of Shape Technologies Group.

Automation 52

Automation Robotics Robotics Manufacturing 52

Mold Making Technology

NOVEMBER 10, 2022

Before 2008, we had around 100 employees, but since then, we’ve advanced and automated some aspects of production that reduced the need for manual labor. We invested in robots and vision systems to run some projects fully automatic. These robots are so approachable, and the programming goes step by step.

Automation 52

Automation Robotics Robotics Prototype  52

Fabricating & Metal Work

MARCH 16, 2023

LaDuca brings more than 25 years of experience to the industry and has been with the Shape Process Automation group for 15 years, having joined Tech-Con Automation in 2008.

Automation 52

Automation Robotics Robotics Manufacturing 52

Canadian Manufacturing

AUGUST 28, 2024

“Just as steam, electricity, and the internet propelled us to produce more with fewer inputs during previous industrial revolutions, automation, robotics, artificial intelligence, and blockchain are shaping up to do the same in food manufacturing in the fourth industrial revolution,” said Amanda Norris, FCC senior economist.

Artificial Intelligence 52

Artificial Intelligence Food Production Smart manufacturing Manufacturing 52

MEM

MAY 22, 2023

A proven engine, designed for the 21st century, it has been in active operation since 2008. This robust and highly-efficient hybrid-electric propulsion system will ensure the ship is capable of operating globally. At its heart, sits our MT30, the world’s most powerful in-service Marine Gas Turbine.

Cargo 52

Cargo Benchmarking Supply Chain Electronics 52

Fastener News Desk

SEPTEMBER 25, 2024

We do not believe that robotics should take over a human being’s job,” he said. The gate has been in place since 2008. Daggett said the union members expect to be waging their biggest fight — against the automation of job functions at ports — well into the future. “We Especially a human being that’s historically performed that job.”

Automation 52

Automation Freight Cargo Supply Chain 52