Manufacturer's Monthly

NOVEMBER 12, 2024

” Dr Taylor joined CSIRO in 2008. . “I have seen the rich expertise and tireless dedication of CSIRO people to this task, and it is an immense privilege to work alongside them. “I am looking forward to growing the ambition of our portfolio to ensure we are helping secure Australia’s future prosperity.”

Manufacturing 92

Manufacturing Industry 4.0 Industry 4.0 92

SMMT

AUGUST 29, 2024

in best July since 2008. CV production, July 2008: 20,997 units; CV production, July 2019: 5,054 units 2 CV production, Jan – Jul 2019: 40,184 units The post CV production turns up heat for summer appeared first on SMMT. Commercial vehicle output soars 71.7% Demand grows at home and overseas, up 63.7% respectively.

Supply Chain 128

Supply Chain Manufacturing 128

SMMT

MARCH 5, 2025

From 1 April, all BEVs will be subject to 10 VED in the first year of ownership, followed by annual VED of 195, currently, in years 2-6 (975), for a total of 985.

Automotive 145

Automotive Manufacturing 145

The Guardian Manufacturing

JANUARY 2, 2024

BYD, which has been backed by the US investment billionaire Warren Buffett since 2008, has beaten Tesla’s production for a second consecutive year. Continue reading.

Manufacturing 111

Manufacturing 111

Robotics Automation News

DECEMBER 21, 2023

While the introduction of cryptocurrency back in 2008 was revolutionary, it wasn’t the concept of cryptocurrency itself that was truly groundbreaking – it was the network that cryptocurrency operates on. […] Microsoft has quietly undergone a major change in their security leadership.

110

110

SMMT

JANUARY 29, 2025

1 While CV output grew by 4.0%, its best level since 2008, multiple factors impacted car volumes, with the end of production for some long running models as factories retooled for EVs, weakness in key global markets, and a slowdown in the transition to electrification amid tough economic conditions. lower than in 2023.

Automotive 90

Automotive Manufacturing 90

Modern Machine Shop

APRIL 6, 2025

This is a far cry from its previous facilities, the 5,600-square foot shop Matt Danford wrote about in 2016 and the 1,000-square foot garage-and-basement combination Peter Zelinski wrote about in 2008. All photos by Modern Machine Shop. Handheld gages remain a common sight at East Coast Precision.

Manufacturing 95

Manufacturing Cycle time Sourcing Aerospace 95

Gary Mintchell

DECEMBER 12, 2024

Rethink Robotics , founded by Rodney Brooks of iRobot fame in 2008, pioneered the concept of robots working collaboratively with humans. Rethink Robotics was a pioneering robotics company founded in 2008 by Rodney Brooks, a renowned roboticist and former director of MIT’s Computer Science and Artificial Intelligence Laboratory (CSAIL).

Robotics 130

Robotics Robotics Artificial Intelligence Automation 130

The Guardian Manufacturing

FEBRUARY 2, 2023

UK rates are now at the highest level since October 2008, when the Bank had only just started cutting rates in response to the financial crisis. In a move expected by City economists, the Bank’s monetary policy committee voted for the 10th consecutive time to raise the cost of borrowing to a fresh 14-year high. Continue reading.

Manufacturing 98

Manufacturing 98

Fabricating & Metal Work

APRIL 2, 2025

All products are made in the USA and Dillon is ISO 9000:2008 registered. Dillon Manufacturing, Inc. manufactures a complete line of standard and custom workholding solutions including chuck jaws, chucks, vises jaws, soft jaws, hard jaws, collet pad jaw systems, chuck lubrication, and more.

Manufacturing 52

Manufacturing 52

Gary Mintchell

OCTOBER 8, 2024

Social media people came and went from Twitter (I was there in 2008), podcasts are big for a few (mine started in 2007). This technology has become mature and somewhat stagnant. There are just a few software companies cranking out interesting products. This is all a long time. YouTubers are big in a few markets. It’s all cool.

Automation 130

Automation Manufacturing 130

SMMT

FEBRUARY 26, 2025

The performance must be set in context, however, with a particularly strong January last year – which saw the best CV output since 2008 compounding the decline. Volumes for the UK market also fell, down by -31.1% to 2,649 units.

Automotive 72

Automotive Manufacturing 72

Omron

OCTOBER 7, 2023

Topics (..)

40

40

Omron

OCTOBER 7, 2023

Topics (..)

40

40

AU Manufacturing

DECEMBER 21, 2022

billion tonnes of CO2 equivalents— a 22 per cent decrease compared with the results of 2008. . A report from Eurostat, the European Union ’s statistics office, has revealed that greenhouse gas emissions generated by economic activities of EU resident units stood at 3.6

Manufacturing 79

Manufacturing 79

SMMT

OCTOBER 24, 2024

to 93,447 units in best first nine months since 2008. on 2023 and the best first nine months since 2008, after supply issues that blighted the second quarter dissipated in Q3.1 Production for export up by more than a third in the month while volumes for domestic buyers rise 10.1%. Year to date production grows by 8.5% to 5,367 units.

Supply Chain 78

Supply Chain Automotive Advanced manufacturing Manufacturing 78

E&T

AUGUST 9, 2023

The researchers combined existing wellbeing data from Gallup, covering nearly one million people from 2008 to 2019, with Facebook data relating to global platform membership. “It The project started prior to the Covid-19 pandemic, and the team worked for more than two years to secure the critically-needed data from Facebook.

98

98

Gary Mintchell

JUNE 16, 2023

All in all I am impressed with what Siemens has done since I first talked with an executive from Germany in 2007 about a vision of digital factory and again in 2008 following the company’s acquisition of UGS. I was there for the Media/Analyst program as well as to explore how the software integration is progressing and coming together.

Automation 130

Automation Manufacturing 130

Manufacturer's Monthly

OCTOBER 6, 2022

Founded in 2008 in Germany, BioNTech has become a leader in mRNA research and in 2020 successfully developed the Pfizer/BioNTech vaccine for COVID-19.

Manufacturing 119

Manufacturing Artificial Intelligence Pharmaceutical Form 119

E&T

JULY 12, 2023

Our first issue of E&T, combining a suite of bimonthlies into a fortnightly magazine, was in 2008. First issue of E&T in 2008 Image credit: E&T Women in engineering was a big issue then and still is, with slow improvement. Issues we were covering then just never seem to go away, even if they’ve evolved.

Artificial Intelligence 98

Artificial Intelligence Electronics 98

Dinesh Mishra

APRIL 21, 2025

Established in 2008, PLI manufactures and markets a full range of high-quality automotive and industrial lubricant products in over 100 markets internationally. Headquartered in Kuala Lumpur, PLI also has offices around the world including Turin, Belo Horizonte, Beijing, and Chicago.

Automotive 52

Automotive Aerospace Manufacturing 52

SMMT

FEBRUARY 26, 2025

The performance must be set in context, however, with a particularly strong January last year – which saw the best CV output since 2008 compounding the decline. Volumes for the UK market also fell, down by -31.1% to 2,649 units.

Automotive 52

Automotive Manufacturing 52

E&T

OCTOBER 14, 2022

The data shows a steep increase in the number of fires between 2008 and 2010. Northern Ireland, which is not covered by Part P, also does not use the incident recording system, so the numbers of electrical distribution fires in Northern Ireland are not represented after 2008 on the graph.

93

93

i4.0 today

DECEMBER 3, 2024

Since its founding in 2008, DECIDE has led the Spanish market in improving and automating business decision-making processes. Diego Segre , Vice President of IBM Software for 30 years, has led operations and teams in over 100 countries.

Form 52

Form Artificial Intelligence Automation 52

Robotics Business Review

NOVEMBER 11, 2024

The company first sold the UR5 cobot in 2008, followed by the launches of UR10 in 2012 and UR3 in 2015. This substantial early-stage funding and the involvement of high-profile investors demonstrated market confidence in Swiss-Mile’s approach to creating autonomous robots that integrate AI with the physical world.

Robotics 114

Robotics Robotics Automation Automotive 114

Manufacturing & Logistics IT

JULY 6, 2020

The impact of COVID-19 on economies around the world has resulted in massive increases in redundancies, wiping out much of the positive growth since 2008. We are currently witnessing a time of unparalleled polarisation within different sections of the global economy.

66

66

Fabricating & Metal Work

OCTOBER 28, 2024

Employee count has increased each year and the company has never had an employee layoff, not even during the recession of 2008/2009 or the pandemic. “We Over twenty years, CCG has funded over $7 billion in equipment loans, financing nearly 135,000 pieces of equipment and over 35,000 transactions. That’s a twenty-year relationship.

Manufacturing 52

Manufacturing 52

SMMT

MARCH 26, 2025

to 8,364 units, driven primarily by less van production and following last years February performance, which was the best since 2008 when output almost doubled. In the year-to-date these electrified cars have taken a 39.6% share of production, up from 36.0% a year ago, with a more modest -2.1% CV output, meanwhile, fell -35.9% Email address.

Manufacturing 91

Manufacturing Automotive 91

NIST

OCTOBER 14, 2022

When Nico asked me if I wanted to collaborate on this year’s challenges blog, my second thought after agreeing to the idea was a scene from the 2007 film “Music and Lyrics,” which I likely have not seen since approximately 2008. Why this popped into my head is unknown but ha! The hip move!

Manufacturing 75

Manufacturing 75

SMMT

JANUARY 17, 2023

Red, although retaining its fifth-place ranking, also recorded a decline to reach its lowest market share since 2008, at 136,793 units accounting for 8.5% Silver, meanwhile, which held first or second place in car buyers’ affections for 12 straight years from 2000 to 2011, posted just 98,483 units and a 6.1% of all cars registered.

Fit 140

Fit Manufacturing 140

Gary Mintchell

DECEMBER 20, 2022

Since its first collaborative robot (cobot) was launched in 2008, Universal Robots has grown to be a global market leader in cobots with offices in more than 20 countries worldwide.

Robotics 130

Robotics Robotics Automation Manufacturing 130

SMMT

FEBRUARY 27, 2025

January 2024 did bring the best output volume for the month since 2008, however, the decline underlines the need for industrial and trade strategies so that everyone manufacturer, operator and the wider economy can grow and decarbonise in the years to come. compared with the same month last year.

Freight 52

Freight Logistics Form Automation 52

Gary Mintchell

FEBRUARY 18, 2023

They still are downloaded after 15 years.

Automation 130

Automation Fit Function Manufacturing 130

Canadian Manufacturing

NOVEMBER 23, 2023

The time frame of the conspiracy was an issue throughout the case; jurors ultimately determined damages occurred between 2004-2008. ” Court documents say the jury found the food manufacturers suffered injury in the timeframe of 2004 to 2008. Several large food manufacturing companies including Kraft Foods Global, Inc.

Manufacturing 72

Manufacturing 72

Robotics Business Review

OCTOBER 1, 2024

The company started developing cobots in Boston back in 2008, but it had to revamp its product line and find new owners. Rethink Robotics relaunches with cobots, AMRs, mobile manipulation Rethink Robotics is making a bold return to Boston with a new roster of collaborative robot arms, autonomous mobile robots, and a mobile manipulator.

Robotics 115

Robotics Robotics Artificial Intelligence Automotive 115

Manufacturer's Monthly

SEPTEMBER 3, 2023

Mr McKinder has a long affiliation with TAFE NSW after completing a five-year apprenticeship in 1992, and becoming a welding and metal fabrication teacher in 2008. He currently teaches at TAFE NSW in Wetherill Park. Deputy Premier and Minister for Skills, TAFE and Tertiary Education Prue Car spoke about the appointment.

Manufacturing 98

Manufacturing 98

E&T

AUGUST 3, 2023

The National Risk Register (NRR) has been released every few years since 2008 and divides risks into four main categories: natural hazards, major accidents, societal risks and malicious attacks. It evaluates a number of risks under each category and discusses the measures currently in place to deal with them.

98

98